Cisco UCS B200 M5 Blade — Used & Refurbished (Cisco)

Block 1:

How Much Does Cisco UCS B200 M5 Blade Cost in 2026?

Used Cisco UCS B200 M5 Blades in 2026 typically range from $1,500 to $15,000, depending on condition and included components. A basic used unit (non-functional, missing storage) may fetch $1,500–$3,000, while a working, vendor-certified system with 2× 1.5TB SSDs and 512GB RAM averages $8,000–$12,000. Refurbished units with warranty (3–5 years) command $13,000–$15,000. Savings vs. 2026 OEM list price (~$45,000 for base config) range from 70–90%, but caveat: storage modules older than 5 years often require replacement (add $200–$500 per drive).

Block 2:

Cisco UCS B200 M5 Blade Specifications and Compatible Systems

The B200 M5 features dual Intel Xeon E5-2600 v4 series CPUs (up to 22 cores), 2TB DDR4 RAM (3DSLR DIMMs), and 8× PCIe 3.0 slots. Storage supports 2× 2.5" drives (SAS/SATA/SSD) plus 4× NVMe U.2. Compatible systems include Cisco UCS B250 M3 (2014) and B440 M5 (2020) chassis, but firmware mismatches with UCS 6454 Fabric Interconnects (2023+) may trigger boot errors. Requires Cisco UCS 2.0(10b) or later for full feature support.

Block 3:

What to Check Before Buying a Used Cisco UCS B200 M5 Blade in 2026

1. Power supply health: Load-test with a 350W dummy load; voltage stability must stay within ±3% (use Fluke 179 multimeter).
2. Fan tray RPM: Check via Cisco IMC (Integrated Management Controller); fans below 12,000 RPM under load indicate bearing wear.
3. Memory errors: Run memtest86+ for 4 hours; errors >0.5% necessitate DIMM replacement.
4. Storage controller firmware: Verify is v3.2(2b) or later to avoid I/O stalls with NVMe drives.
5. Backplane connectivity: Use Cisco UCS Manager to confirm all PCIe lanes are active (no "Link Down" on slots 1–4).

Block 4:

Frequently Asked Questions

Q: Why do prices vary so much for the same model?
A: Storage type (HDD vs. SSD), RAM capacity, and presence of Cisco-branded PSUs drive 60–70% of price differences.