NetApp AFF A300 — Used & Refurbished (NetApp)

Block 1:

How Much Does NetApp AFF A300 Cost in 2026?

Used NetApp AFF A300 systems in 2026 typically range from $3,000 to $50,000, depending on condition and included storage. Used units with original 24-drive enclosures (DS4486) and 4- or 8-GB NVRAM modules average $12,000–$18,000. Refurbished models with replaced power supplies and firmware updates cost $22,000–$35,000. Vendor-certified systems (e.g., from NetApp-authorized resellers) with 3-year warranties hit $45,000–$50,000. Compared to the OEM’s 2026 list price (~$80,000 for base config), used buys save 60–90%. Caveat: Pre-2020 models often ship with 480GB or 1TB SAS drives; upgrading to 4TB+ NVMe adds $8,000–$12,000 in parts.

Block 2:

NetApp AFF A300 Specifications and Compatible Systems

The AFF A300 is a 2U all-flash array with dual controllers, 2x SAS3 or NVMe drive slots (expandable to 24 via DS4486), and 4/8/16 GB NVRAM. Base throughput: 1.5 GB/s, up to 150,000 IOPS (4K rnd rd). Compatible with NetApp FAS2720 (2019–2022), FAS2750 (2020–2023), and FAS8200 (2018–2021) clusters. Requires ONTAP 9.8+ (2024 updates critical for NVMe support). Warning: DS460 shelf (2022+) requires firmware 9.10+; older shelves may trigger parity errors. Avoid mixing SAS and NVMe drives in the same aggregate.

Block 3:

What to Check Before Buying a Used NetApp AFF A300 in 2026

1. Drive health: Run df -h and sysconfig -a to confirm no offline/spare drives. Replace any drive over 70% worn.
2. NVRAM battery voltage: Use nvram status—voltage below 3.3V indicates imminent failure.
3. Controller boot time: Exceeding 5 minutes suggests corrupted firmware or cache issues.
4. Port speed negotiation: Check ifconfig for 10GbE ports; 1GbE negotiation means faulty SFP+ modules.
5. Shelf compatibility: Verify DS4486 shelf firmware matches the controller (use NetApp Active IQ Config Advisor).

Use NetApp’s Active IQ OneCollect for full diagnostics and **On