NetApp EF280 All-Flash — Used & Refurbished (NetApp)

Block 1:

How Much Does NetApp EF280 All-Flash Cost in 2026?

Used NetApp EF280 All-Flash systems in 2026 typically range from $3,000 to $50,000, depending on condition and configuration. Used units (as-is) start at $3,000 but may require component replacement. Refurbished models (tested, replaced capacitors/SSDs) average $15,000–$25,000. Vendor-certified systems (warranty included, full diagnostics) cost $30,000–$50,000. Savings vs. new OEM list price (approx. $85,000–$120,000) range from 60% to 80%, depending on vendor. Caveat: Systems with less than 2 PB raw storage capacity save ~$55k less than fully loaded models. Always verify included SSDs—lower-capacity units may hide in "base config" listings.

Block 2:

NetApp EF280 All-Flash Specifications and Compatible Systems

The EF280 is a 2U all-flash storage array with up to 24 SSD slots (2.5" or M.2), supporting 300–2,400 GB/s throughput and 1.2M IOPS (4K random). It uses SAS, SATA, or NVMe SSDs (user-upgradable). Compatible with NetApp ONTAP 9.8–10.2 (2023–2026 releases). Works with Cisco UCS B200 M5 (2019), Dell EMC PowerEdge R750 (2022), and HPE ProLiant DL380 Gen10 (2019). Warning: NVMe SSDs require ONTAP 10.1+; older firmware may throttle performance. Avoid mixing SAS and NVMe drives in the same aggregate. Minimum 10 GbE connectivity; 25/100 GbE upgrades require separate CNAs (not included in base unit).

Block 3:

What to Check Before Buying a Used NetApp EF280 All-Flash in 202