NetApp FAS2750 — Used & Refurbished (NetApp)

Block 1:

How Much Does NetApp FAS2750 Cost in 2026?

Used NetApp FAS2750 systems in 2026 typically range from $3,000 to $50,000, depending on condition and included storage. Used units with original 8-drive enclosures (2018–2020 vintage) fetch $3k–$8k, while vendor-certified refurbished models with expanded storage (e.g., 24 SAS bays) reach $20k–$35k. High-end configurations with all-flash NVMe upgrades and dual controllers (2021–2022 builds) can hit $50k, nearing half the 2023 OEM list price of ~$100k. Savings vs new: 65–90% for used/refurbished. Caveat: Systems with original 7200 RPM SATA drives (pre-2019) may require costly drive replacements within 18–24 months due to age-related failure rates.

Block 2:

NetApp FAS2750 Specifications and Compatible Systems

The FAS2750 is a 2U dual-controller storage array with dual Intel Xeon E5-2643v4 (6-core, 3.4GHz) processors, 128GB DDR4 RAM (expandable to 512GB), and support for 24 SAS/SATA or 12 NVMe drives. Throughput peaks at 3,500 IOPS with all-flash configs. Compatible systems include IBM Power Systems (S824L, 2019), HP ProLiant DL380 Gen10 (2020), and Dell EMC PowerEdge R740 (2021). Warning: Firmware versions post-ONTAP 9.8 may trigger incompatibility errors with FAS2750’s hardware-assisted encryption modules.

Block 3:

What to Check Before Buying a Used NetApp FAS2750 in 2026

1. Drive Health: Run sysconfig -a in terminal; replace any drive with >5% reallocated sectors or >100 pending errors (use smartctl for granular SMART data).
2. Controller Status: Check for NVRAM battery degradation via OnCommand System Manager; replace if charge holds <80% for 24 hours.
3. Cache Integrity: Stress-test NVRAM cache with ior (write 1TB sequential data); latency >15ms indicates failing modules.
4. Throughput Benchmark: Run iperf3 for 10-minute sustained writes; <2.8GB/s on all-flash configs signals backplane or controller