NetApp FAS8700 — Used & Refurbished (NetApp)

Block 1:

How Much Does NetApp FAS8700 Cost in 2026?

Used NetApp FAS8700 systems in 2026 typically range from $3,000 to $50,000, depending on condition and configuration. Used units with original SAS drives and no SSD upgrades start at $3k–$8k, while vendor-certified refurbished models with 10GbE and SSDs hit $20k–$50k. Refurbished systems include replaced power supplies, updated firmware, and 90-day warranties; vendor-certified units add performance testing and 1-year support. Compared to the OEM’s 2026 list price (~$150k for a base config), used buys save 98%+. Caveat: Systems older than 2018 lack NVMe support and may require controller upgrades for modern workloads.

Block 2:

NetApp FAS8700 Specifications and Compatible Systems

The FAS8700 is a 2U dual-controller storage array supporting up to 12 drives (SAS, SATA, or SSD) and 48TB raw capacity. It features dual 10GbE ports, dual-core Xeon processors (2.5GHz), and 16GB RAM (upgradable to 32GB). Compatible with NetApp DS224C disk shelves (2018–2020 models) and DS4486 (2019–2021). Requires ONTAP 9.4–9.8 firmware for full feature sets. Warning: Firmware versions above 9.6 may conflict with pre-2020 DS4486 shelves; verify compatibility before deployment.

Block 3:

What to Check Before Buying a Used NetApp FAS8700 in 2026

1. Drive health: Run sysconfig -a in CLI; replace any drives with >5% reallocated sectors. Use OnCommand System Manager to verify S.M.A.R.T. status.
2. Controller board: Check for capacitors bulging near VRM modules. Run NetApp Diagnostics v3.2 to test CPU and memory integrity.
3. Cache battery: Replace if aged >3 years; check aggr status -s for “cache battery degraded” warnings.
4. Firmware version: Systems with ONTAP <9.5 lack SSD wear-leveling optimizations; demand firmware logs.
5. Power supply: Measure 48V and 12V rails with a multimeter; voltage drops >5% indicate failing PSUs.

Block 4:

Frequently Asked Questions

Q: Why are some FAS8700s priced below $5k in 2026?
A: Units older than 2018 with SATA-only configs and no 10GbE upgrades typically sell for $3k–$5k. Newer models with SSDs and 10GbE cost 5–10x more.

Q: NetApp FAS8700 vs. Dell EMC PowerStore X400 — which is better used?
A: The FAS8700 offers better raw IOPS ($/IOPS ratio