Pure Storage FlashArray X70 — Used & Refurbished (Pure Storage)

How Much Does Pure Storage FlashArray X70 Cost in 2026?

In 2026, used Pure Storage FlashArray X70 systems typically range from $3,000 to $50,000, depending on condition and configuration. Used units with original 1TB NAND drives (pre-2021 builds) start at $3k–$8k, while vendor-certified refurbished models with 4TB drives and 2022+ firmware list for $25k–$40k. Fully functional, low-usage systems with 2023+ production cycles and 10GbE upgrades hit $50k (rare). Compared to the 2026 OEM list price (~$100k), buyers save 70–90%. Caveat: Pre-2020 units often lack NVMe support and may require costly controller card swaps ($2k–$5k) for modern workloads.

Pure Storage FlashArray X70 Specifications and Compatible Systems

The FlashArray X70 offers 7.68TB raw capacity (expandable to 15.36TB with 4TB drives), 1.2GB/s throughput, 1.2M IOPS, and <100μs latency. It uses 24 x 1.8" SAS/SATA/SSD drives, dual active controllers, and 10GbE/iSCSI or FC connectivity. Compatible with VMware vSphere 7.0+, Hyper-V 2019, and Linux 5.10+. Works in racks with 2U spacing and 500W+ PSUs. Warning: Pre-2021 models use older firmware (Purity 6.2), which may conflict with newer Kubernetes clusters (requires manual patching). Commonly paired with Dell EMC PowerEdge R750 (2020–2022) and HPE ProLiant DL380 Gen10 (2021–2023).

What to Check Before Buying a Used Pure Storage FlashArray X70 in 2026

1. Drive health: Use purestatus CLI to check SSD wear levels. Above 30% wear indicates imminent failure.
2. Controller logs: Run Pure1 MetaCheck (free tool) for hidden errors like cache battery degradation (>5 years old = replace).
3. Firmware version: Confirm Purity 7.0+ (2023+). Older versions lack NVMe support and may crash under 80% utilization.
4. IOPS stress test: Use Pure Storage IOPower to verify sustained 1M IOPS at 4K block sizes. Drop