Schneider Electric Galaxy UPS 9000 — Used & Refurbished (Schneider)

Block 1:

How Much Does Schneider Electric Galaxy UPS 9000 Cost in 2026?

In 2026, used Schneider Electric Galaxy UPS 9000 units typically range from $200 to $8,000, depending on condition. Used units (as-is, no testing) start at $200–$1,200. Refurbished models (tested, replaced capacitors/batteries) cost $3,000–$6,000. Vendor-certified (warranty included, full diagnostics) top the range at $7,000–$8,000. Compared to the 2026 OEM list price (~$20,000+), buyers save 60–75%. Caveat: Battery runtime in older units may degrade by 20–30% even after replacement, requiring separate evaluation.

Block 2:

Schneider Electric Galaxy UPS 9000 Specifications and Compatible Systems

The Galaxy UPS 9000 is a 15–60 kVA three-phase tower UPS with 94% efficiency (ECO mode). Input voltage: 208–480 VAC; output: 208/240 VAC, 50/60 Hz. Dimensions: 29.5”H x 22.8”W x 18.9”D; weight: ~400 lbs. Compatible with Dell PowerEdge R740/R940 (2019–2023), HP ProLiant DL380 Gen10 (2018–2022), and Cisco UCS C220 M5 (2020–2024). Requires firmware version V7.2+ for SNMP monitoring compatibility. Warning: Do not pair with pre-2015 IBM System x3850 servers—incorrect power factor correction causes tripping.

Block 3:

What to Check Before Buying a Used Schneider Electric Galaxy UPS 9000 in 2026

1. Battery health: Use a multimeter to measure DC bus voltage. Must read ≥90% of nominal (e.g., 384VDC for 480VAC systems). Replace if below 85%.
2. Capacitor bulge: Open the rear panel; check for swollen or leaking capacitors (common in units >8 years old).
3. Output stability: Run a 24-hour load test at 75% capacity. Use Schneider’s Smart UPS Diagnostics V3.1 software to log