ASML
Asml 402242811190 Timing Control Pcb Card Pas 50002500 Wa
ASML
Asml 402242811190 Timing Control Pcb Card Pas 50002500 Wa
Part No. Asml Asml 402242811190 Timing Control Pcb Card Pas 50002500 Wa
Market Price
$2K
One observed secondary-market listing · USD
Historical asking-price observations · Not confirmed current stock or an offer
Contact for availability. Stock and condition require confirmation for a specific unit.
Talk to a specialist · parts@caladansemi.com
How much does a used Asml 402242811190 Timing Control Pcb Card Pas 50002500 Wa cost in 2026?
One observed secondary-market listing for a used Asml 402242811190 Timing Control Pcb Card Pas 50002500 Wa from ASML: $2k (2026). A single observation is not a market range. Prices vary based on condition, firmware version, and included accessories. Request a quote for current availability.
What should I confirm before buying used ASML None?
Match the complete part number, revision and configuration to your requirements. Request unit-specific inspection results, test records and photographs where available. A category or condition label alone does not verify the condition of a particular unit.
What terms apply to a quote for Asml 402242811190 Timing Control Pcb Card Pas 50002500 Wa?
Ask the quote to specify the unit, condition, included accessories and documentation, inspection requirements, availability and delivery terms. Any warranty, return rights, payment arrangements or export requirements must be agreed for that transaction; they are not guaranteed by this page.
How Much Does ASML 4022.428.11190 Timing Control PCB Card PAS 5000/2500 Wafer Stepper Cost in 2026?
The ASML 4022.428.11190 Timing Control PCB Card typically ranges from $1,802–$1,802 in 2026, depending on condition and sourcing channel. Refurbished units from vendors like Ferrotec or Axus Technology often fall into this bracket, offering 40–60% savings compared to new replacements (which exceed $4,500 if available). Used units in "B" grade condition (tested but with minor wear) are most common, while "A" grade (certified like-new) may add 10–15% to the base price.
Failure to source a compatible unit can cost $10,000+ per day in downtime for legacy ASML PAS 5000/2500 systems still in production. Note that units produced post-2005 (check serial labels) may lack backward compatibility with pre-2003 tool variants, risking integration delays. Always verify the production year with the seller—units older than 2018 may show degraded capacitors, increasing failure risk during installation.
ASML 4022.428.11190 Timing Control PCB Card PAS 5000/2500 Wafer Stepper Specifications and Compatible Tools
This PCB manages motion synchronization for ASML’s PAS 5000 and PAS 2500 wafer steppers, typically used in 1998–2005-era lithography systems. Key specs include ±5% timing accuracy, 24V DC power input, and 16-bit signal resolution. Lifespan metrics suggest ~8,000–10,000 RF hours before capacitor drift becomes critical.
Compatible tools include PAS 5500i (1999–2002) and PAS 2500i (2000–2004) models. Do not use with 4022.428.11191 variants—the successor part number—which employs a different clocking protocol. A failed PCB can cause wafer misalignment errors, leading to $5,000–$8,000 in lost throughput per batch. Verify firmware compatibility (v2.1–v2.3) with your tool’s control system before purchase.
What to Check Before Buying a Used ASML 4022.428.11190 Timing Control PCB Card PAS 5000/2500 Wafer Stepper in 2026
- Production Year: Reject units made after 2005 (check PCB silkscreen). Pre-2003 boards are ideal for PAS 5000/2500 systems.
- Capacitor Health: Use an ESR meter to test electrolytic capacitors—values above 0.1 ohms indicate failure risk.
- Signal Integrity: Perform a continuity test on all 40-pin connectors; open circuits above 0.5 ohms are non-negotiable.
- Firmware Version: Confirm v2.1–v2.3 compatibility. Boards with v2.4+ may require firmware downgrades ($300–$500 extra).
- Thermal History: Units with rework solder joints (visible under 10x magnification) should be rejected—rework increases failure rates by 30%.
Purchasing a defective unit can delay production by 3–7 days while awaiting replacements. Always request a functional test video showing real-time signal output under load.
FAQ
Q: Can I use a 4022.428.11190 PCB in a 2006 PAS 5500i?
A: No. The 2006+ models require the 4022.428.11191 variant with a revised clocking circuit. Using the older PCB will trigger a system shutdown error (code 412).
Q: Should I replace a working 4022.428.11190 if it’s over 15 years old?
A: Yes. Capacitors degrade after **12–15
Related Parts
ASML
ASML 4022.230.0332 CPU PCB Card for PAS 5000/2500 Wafer Stepper
PN: 4022.230.0332
ASML
ASML 4022.422.6423 Commutator PCB Card – PAS 5000/2500 Wafer Stepper
PN: 4022.422.6423
ASML
ASML 4022.423.1786 Processor PCB Card – PAS 5000/2500 Wafer Stepper
PN: 4022.423.1786
ASML
ASML 4022.428.1276 Relay PCB Card – PAS 5000/2500 Wafer Stepper
PN: 4022.428.1276
ASML
ASML 4022.428.1457 TB 2500 T PCB Card
PN: 4022.428.1457
ASML
ASML 4022.428.1763 Relay PCB Card
PN: 4022.428.1763
Quick Info
Get a Quote
Market: $2K (one observed listing)
Request pricing, availability and any applicable export requirements.
Email parts@caladansemi.comOr call us during business hours
Place a Bid or Ask
Submit your buying or selling requirements for Asml 402242811190 Timing Control Pcb Card Pas 50002500 Wa.
Confirm export requirements and payment terms before any transaction · parts@caladansemi.com