Ultrasonic Cleaning — Greco Brothers UT2424-3618-40-12 Heated Ultrasonic Clening Bath (Bidservice)

How Much Does Greco Brothers UT2424-3618-40-12 Heated Ultrasonic Clening Bath Cost in 2026?

As of July 2026, the Greco Brothers UT2424-3618-40-12 Heated Ultrasonic Cleaning Bath is listed in the used market at a fixed price of $6,950. This price typically reflects a unit in condition grade B, which means it has been refurbished and is functional but may show signs of wear or require minor maintenance. Units in higher condition grades, such as A or A+, can command prices up to $8,500–$9,500, depending on the vendor and the extent of the refurbishment.

Refurbishment partners like Ferrotec and Covalent Materials commonly handle these units, offering savings of 40–60% compared to the new price point, which is typically around $14,000–$16,000. If a facility delays sourcing a replacement and continues using a failing unit, it could face $2,000–$3,000 in daily downtime costs due to cleaning inefficiencies and potential contamination risks.

It's important to note that the condition grade B does not guarantee full compliance with original equipment manufacturer (OEM) specifications. Users should verify key performance metrics with the seller before purchase. Units older than 10 years may require more frequent maintenance, which can add $500–$1,000 annually in operational costs.

Greco Brothers UT2424-3618-40-12 Heated Ultrasonic Clening Bath Specifications and Compatible Tools

The Greco Brothers UT2424-3618-40-12 is a heated ultrasonic cleaning bath with a typical tank size of 24" x 24" x 12" and a maximum operating temperature of 140°F. It commonly operates at 40 kHz and is designed for up to 10,000 cleaning cycles over its lifecycle. The unit is typically used in semiconductor manufacturing, aerospace, and medical device industries for precision cleaning of small parts.

This model is compatible with most standard ultrasonic cleaning systems and is often used with parts such as semiconductor wafers, nozzles, and precision tools. However, it is not compatible with high-temperature or high-alkaline cleaning solutions typically used in conjunction with the Bidservice UT3000 series. Using incompatible solutions can lead to corrosion and a $1,500–$2,500 repair bill for internal components.

Verify with the seller if the unit has been used with aggressive solvents or if the transducers have been replaced. Failure to do so could result in a unit that underperforms or fails within the first 6 months of operation, leading to $1,000–$2,000 in lost productivity.

What to Check Before Buying a Used Greco Brothers UT2424-3618-40-12 Heated Ultrasonic Clening Bath in 2026

1. Verify the production year. Units produced before 2015 may have older transducers that are more prone to failure. A unit older than 12 years may not meet current cleaning standards.

2. Test the heating element. Use a multimeter to check for continuity and resistance. A failed heating element can reduce cleaning efficiency by up to 30%, leading to $1,000 in lost throughput per month.

3. Inspect the transducers. Run a frequency test at 40 kHz. If the unit cannot maintain a stable frequency, reject it. Transducer failure is a common issue in used units and can cost $800–$1,200 to replace.

4. Check the tank for corrosion or pitting. A damaged tank can allow contaminants to mix with the cleaning solution, risking $2,000–$3,000 in rework costs for contaminated parts.

5. Review the maintenance history. Units that have not had their filters or transducers replaced in the last 2 years may require immediate service. A lack of maintenance history is a red flag and should be treated as a hard reject.

Failing to perform these checks could result in a unit that fails within the first 3–6 months, leading to $1,500–$2,500 in unplanned downtime and repair costs.

FAQ

Q: Can I use the Greco Brothers UT2424-3618-40-12 with high-alkaline cleaning solutions?
A: No. This unit is not designed for high-alkaline solutions, which can degrade the tank and internal components. Using such solutions can lead to corrosion and a $1,500–$2,500 repair bill.

Q: How long can I expect a used UT2424-3618-40-12 to last before requiring major maintenance?
A: With proper maintenance, a used unit in condition grade B can last 3–5 years before requiring transducer or heating element replacement. Units that are not maintained may need service within 1–2 years.

Q: Should I buy a UT2424-3618-40-12 from a seller who does not provide a maintenance log?
A: No. Units without a maintenance history are high-risk and should be avoided. A lack of records may indicate poor maintenance, which can lead to $1,000–$2,000 in unexpected repair costs within the first year.

Q: How does the UT2424-3618-40-12 compare to the Bidservice UT3000 in performance?
A: The UT3000 offers a larger tank and higher temperature capabilities (up to 180°F), making it better suited for high-volume or high-temperature cleaning. The UT2424-3618-40-12 is more cost-effective but limited to 140°F and smaller parts.

Q: What is the average annual maintenance cost for a UT2424-3618-40-12 in condition grade B?
A: On average, users can expect to spend $500–$1,000 per year on filter replacements, transducer checks, and minor repairs, depending on usage frequency and solution type.