Hp 411122 001 Brocade Bladesystem 424 San Switch

How Much Does HP 411122-001 Brocade BladeSystem 4/24 SAN Switch Cost in 2026?

As of July 2026, the HP 411122-001 Brocade BladeSystem 4/24 SAN Switch is typically listed in the used or refurbished market at an average price of $68. This is a mid-range condition B unit, which is the most commonly available tier. Refurbished units from vendors like Axus Technology and Covalent Materials can range from $58 to $75, depending on the condition and included documentation. New units, if still available, are typically priced over $150, making used or refurbished options a 40–60% cost savings.

The cost of failure for a defective unit can be significant. If a switch fails in a live SAN environment, it can cause up to $1,200 in downtime costs per hour, depending on the data center’s size and SLA requirements. That’s why it’s critical to verify the condition and test the unit before deployment. Units with more than 10,000 operational hours or signs of overheating should be avoided, as they are more likely to fail within 6–12 months of installation.

HP 411122-001 Brocade BladeSystem 4/24 SAN Switch Specifications and Compatible Tools

The HP 411122-001 is a 4-port, 24-fiber channel SAN switch designed for use in HP BladeSystem enclosures. It typically supports speeds up to 4 Gbps and is commonly used in storage area networks for high-availability and redundancy. The switch is often rated for up to 10,000 operational hours, though actual lifespan can vary based on cooling and workload. It was commonly used in HP BladeSystem c3000 and c7000 enclosures from 2008 to 2014.

This part is generally compatible with HP BladeSystem management tools like the HP Onboard Administrator (v4.2–v5.0). However, it is not compatible with newer HP 3PAR storage controllers using firmware 3.3.1 and above. Attempting to use it in an incompatible system can lead to configuration errors and potential data loss, with repair or recovery costs often exceeding $2,500.

What to Check Before Buying a Used HP 411122-001 Brocade BladeSystem 4/24 SAN Switch in 2026

1. Verify Operational Hours: Units with more than 8,000 operational hours are high-risk. Use a fiber channel analyzer or the switch’s built-in diagnostics to check usage. A unit with 10,000+ hours should be rejected outright due to high failure risk.

2. Test Port Functionality: Use a Brocade FC Port Test Tool or a Fluke Networks LinkRunner to verify all four ports. Any port that fails to negotiate a link at 4 Gbps should be flagged for further inspection.

3. Check for Firmware Compatibility: Ensure the firmware is compatible with your current storage controllers. If you're using HP 3PAR 7000 series, firmware older than v3.2.1 must be upgraded before installation.

4. Inspect for Physical Damage: Look for signs of overheating, such as discoloration on the PCB or warped connectors. Units with more than two physical defects should be rejected.

5. Request a Power-On Test Report: A unit that fails to power on or shows error codes during boot is likely to fail within 30 days. Always request a full test report from the seller.

Purchasing a faulty unit can result in up to $3,000 in repair and downtime costs, so due diligence is essential.

FAQ

Q: Can I use the HP 411122-001 with a 2020 HP 3PAR 8000 series storage controller?
A: No. The HP 411122-001 is not compatible with HP 3PAR 8000 series controllers running firmware v4.0 or newer. You must use a switch with 8 Gbps or higher and firmware v4.1 or above.

Q: Should I replace the HP 411122-001 if it has 9,000 operational hours?
A: Yes. Units with over 8,500 hours are at high risk of failure. Replacing them proactively can save you up to $2,000 in potential downtime and repair costs.

Q: How long can I expect the HP 411122-001 to last in a well-maintained environment?
A: With proper cooling and regular firmware updates, you can expect a lifespan of 5–7 years. Units installed in 2018 or earlier should be closely monitored, as they may be nearing end-of-life.

Q: What’s the difference between a used and a refurbished HP 411122-001?
A: A used unit may not have been tested or cleaned, while a refurbished unit from a vendor like Axus Technology has typically been tested, cleaned, and may include a 90-day warranty. Refurbished units are generally 20–30% more expensive but carry a 50% lower risk of failure.

Q: Is it worth buying a used HP 411122-001 if I can get a new one for $150?
A: Yes. Used units can save you 40–60% of the cost. If you can verify the condition and get a 60-day warranty, the risk is often worth the savings.