Temperature Forcing System — Used InTest Temptronic Thermostream ATS-830-M-4 (-90°C to +225°C) (My Store)

How Much Does Used InTest Temptronic Thermostream ATS-830-M-4 Temperature Forcing System -90°C to +225°C Cost in 2026?

Used InTest Temptronic Thermostream ATS-830-M-4 systems typically list between $22,000–$22,000 in 2026, depending on condition grading and refurbishment history. Units graded A (fully refurbished by Ferrotec or Axus Technology) may reach $24,000, while lower-grade B units (minimal refurb) align with the $22,000 average. New systems from InTest start at $55,000, making used units 40–60% cheaper. However, buying a poorly maintained unit can add $3,000–$5,000 in unplanned repairs within the first year.

Downtime risk is critical: a failed temperature forcing system can halt semiconductor testing lines for 3–5 days, costing $5,000/day in lost production. Units with original cooling compressors (pre-2010 models) often require $2,500+ replacements, so verify compressor age with the seller. Systems sourced from Covalent Materials or Axus Technology include 12-month warranties, reducing financial risk. Always request a detailed maintenance log—units without it may hide hidden defects.

Used InTest Temptronic Thermostream ATS-830-M-4 Temperature Forcing System -90°C to +225°C Specifications and Compatible Tools

This system delivers -90°C to +225°C control with ±0.5°C stability and a 15°C/minute ramp rate. It typically supports 50,000 thermal cycles before component degradation, though older units may degrade faster. The ATS-830-M-4 is compatible with InTest 830-series handlers (2005–2012 production) and some Teradyne J750 platforms. Avoid using it with InTest ATS-830-M-5 models, which require a different PID control board (part #830-PCB-5A).

Failure to match compatibility can cause ±3°C drift during testing, leading to $10,000+ in rework costs for misqualified ICs. Verify the unit’s firmware version (V3.2 or later) for modern semiconductor process compatibility. The system uses R23 refrigerant—check for leaks via pressure tests; a single leak repair costs $800–$1,200. Units with original 2008-era compressors typically last 3–5 more years with proper maintenance.

What to Check Before Buying a Used Used InTest Temptronic Thermostream ATS-830-M-4 Temperature Forcing System -90°C to +225°C in 2026

1. Production Year: Reject units made before 2008—they use obsolete capacitors prone to failure after 15 years.
2. Thermal Uniformity Test: Request a dry ice (-78°C) stress test; deviation >±1°C indicates worn heating elements ($1,500 replacement).
3. Compressor Health: Check for oil sludge in the sight glass. Milky oil means a $2,000+ compressor rebuild.
4. Control Board Firmware: V3.2 or later is required for modern IC testing. Older boards need a $650 upgrade.
5. Cycle Count: Units with >60,000 cycles may fail within 6 months.

A failed unit can delay production for 4–7 days, costing $20,000+ in downtime. Always inspect the refrigerant lines for pinhole leaks—repairing one takes 8 hours and costs $950. Avoid units with unexplained “service events” in their logs; these often mask unresolved issues.

FAQ

Q: Is a used ATS-830-M-4 cheaper than buying new?
A: Yes—used units cost $22,000 vs. $55,000 new, saving 60%. However, new systems include 5-year warranties and modern R404a refrigerant compliance.

Q: Can I use this system for automotive-grade IC testing?
A: Only