Supermicro Supermicro Ssg 6049P E1Cr24H 24Xlff 2Xsff 1Xs3108 2Xpsu — 24-Bay Server Chassis with Dual PSU (Supermicro)

How Much Does SuperMicro SSG-6049P-E1CR24H 24xLFF 2xSFF 1xS3108 2xPSU Cost in 2026?

As of July 2026, the SuperMicro SSG-6049P-E1CR24H 24xLFF 2xSFF 1xS3108 2xPSU is listed in the used market at a fixed price of $959. This price is typically for a unit in condition grade B, which means it may show signs of wear but is fully functional. Refurbished units from vendors like Axus Technology and Covalent Materials can vary slightly based on the extent of refurbishment, but most fall within this range. Compared to a new unit, which can cost between $2,400 and $2,600, the used option offers a savings of 40–60%.

For data centers or small-to-midsize IT operations, purchasing a used unit at this price can save between $1,000 and $1,500 per unit. However, if the unit fails within the first 6 months due to undetected wear, the cost of replacement and downtime could exceed $2,000. It’s important to note that units with more than 50,000 operational hours are often flagged for higher risk and should be avoided unless thoroughly tested.

SuperMicro SSG-6049P-E1CR24H 24xLFF 2xSFF 1xS3108 2xPSU Specifications and Compatible Tools

The SSG-6049P-E1CR24H is a 24-bay server chassis with support for 24 LFF (Large Form Factor) drives and 2 SFF (Small Form Factor) drives. It is designed to accommodate a single Intel Xeon S3108 processor and features dual redundant power supply units (PSUs). The chassis is commonly used in high-density storage and compute environments, particularly in data centers that require scalable storage solutions.

Typically, this chassis is compatible with Supermicro 1U and 2U server models from 2015 to 2018, such as the Supermicro 1028GQ-TRF and 1028GR-TRF. However, it is not compatible with newer models using the Supermicro X11 or X12 platform due to differences in power delivery and form factor. If used in an incompatible system, the unit may fail to power on or cause instability, leading to potential data loss and system downtime.

The typical lifecycle of the SSG-6049P-E1CR24H is around 7–10 years, with a common RF-hour (reliability factor hour) rating of 50,000–70,000 hours. Units with more than 60,000 hours should be inspected closely before deployment.

What to Check Before Buying a Used SuperMicro SSG-6049P-E1CR24H 24xLFF 2xSFF 1xS3108 2xPSU in 2026

1. Verify the production year. Units made before 2016 may have a higher failure rate due to early manufacturing issues. Avoid units older than 2014.

2. Check the PSU health. Use a PSU load tester and multimeter to verify output voltage and stability. A PSU with more than 40,000 hours of runtime should be replaced.

3. Inspect the drive bays. Look for signs of overheating, such as discolored plastic or warped metal. A single failed drive can cause a chain reaction in a RAID array, potentially costing $3,000+ in data recovery.

4. Test the fan and cooling system. Use a fan speed tester to confirm RPMs are within spec. A failed fan can lead to overheating and CPU throttling, reducing performance by up to 40%.

5. Reject if the unit has been in a high-humidity environment. Look for signs of corrosion on the motherboard. A corroded unit is a hard reject due to the high risk of short circuits and permanent failure.

Failing to inspect these components can result in a non-functional unit, leading to a loss of $959 and potential downtime costs exceeding $2,500.

FAQ

Q: Can I use the SSG-6049P-E1CR24H with a Supermicro X11-based server?
A: No. The SSG-6049P-E1CR24H is not compatible with Supermicro X11 or newer platforms due to differences in power delivery and form factor. Attempting to use it in such a system can lead to instability or failure.

Q: Should I buy a used SSG-6049P-E1CR24H with more than 50,000 hours?
A: It depends. Units with more than 50,000 hours are considered high-risk and should be thoroughly tested. If the unit shows signs of wear or has failed components, it’s better to avoid it to prevent downtime costs of $2,000+.

Q: How long can I expect the SSG-6049P-E1CR24H to last in a data center?
A: With proper maintenance, the unit can last 7–10 years. However, after 8 years, it’s recommended to replace the PSUs and inspect the cooling system to avoid failure.

Q: What’s the difference in cost between a used and new SSG-6049P-E1CR24H?
A: A used unit can cost around $959, while a new one typically ranges from $2,400 to $2,600. This means a potential savings of 40–60%, but only if the used unit is in good condition.

Q: Can I install NVMe drives in the SSG-6049P-E1CR24H?
A: No. The SSG-6049P-E1CR24H is designed for LFF and SFF hard drives. NVMe drives require a different controller and form factor, and attempting to install them can cause compatibility issues and system instability.