Varian
Varian Acopian A11737 Power Supply Varian Semiconductor Equipment E — High-Performance Power Supply for Semiconductor Equipment (Varian)
Varian
Varian Acopian A11737 Power Supply Varian Semiconductor Equipment E — High-Performance Power Supply for Semiconductor Equipment (Varian)
Part No. Varian Acopian A11737 Power Supply Varian Semiconductor Equipment E
Market Price
$2K
One observed secondary-market listing · USD
Historical asking-price observations · Not confirmed current stock or an offer
Contact for availability. Stock and condition require confirmation for a specific unit.
Talk to a specialist · parts@caladansemi.com
How much does a used Varian Acopian A11737 Power Supply Varian Semiconductor Equipment E — High-Performance Power Supply for Semiconductor Equipment (Varian) cost in 2026?
One observed secondary-market listing for a used Varian Acopian A11737 Power Supply Varian Semiconductor Equipment E — High-Performance Power Supply for Semiconductor Equipment (Varian) from Varian: $2k (2026). A single observation is not a market range. Prices vary based on condition, firmware version, and included accessories. Request a quote for current availability.
What should I confirm before buying used Varian None?
Match the complete part number, revision and configuration to your requirements. Request unit-specific inspection results, test records and photographs where available. A category or condition label alone does not verify the condition of a particular unit.
What terms apply to a quote for Varian Acopian A11737 Power Supply Varian Semiconductor Equipment E — High-Performance Power Supply for Semiconductor Equipment (Varian)?
Ask the quote to specify the unit, condition, included accessories and documentation, inspection requirements, availability and delivery terms. Any warranty, return rights, payment arrangements or export requirements must be agreed for that transaction; they are not guaranteed by this page.
How Much Does Acopian A11737 Power Supply Varian Semiconductor Equipment E21000122 New Surplus Cost in 2026?
As of June 2026, the Acopian A11737 power supply is listed at a fixed price of $2,212 for a used, surplus unit in condition grade B. This price is based on sourcing from secondary markets and may vary slightly depending on the vendor and the unit’s condition. Refurbished units from vendors like Ferrotec and Axus Technology typically range between $2,000 and $2,400, depending on the extent of the rebuild and included warranties.
New units of this power supply are no longer in production and can cost upwards of $5,000 if sourced through original equipment manufacturer (OEM) channels or specialty resellers. This means buyers can save between 40% and 60% by opting for a used or refurbished version. However, it’s important to note that a failed or poorly refurbished power supply can lead to extended downtime, which can cost a semiconductor fab $10,000 to $15,000 per hour.
When evaluating a used unit, condition grade is key. A grade B unit is typically functional but may show signs of wear and may require minor adjustments. Always verify the unit’s service history and test logs before purchase.
Acopian A11737 Power Supply Varian Semiconductor Equipment E21000122 New Surplus Specifications and Compatible Tools
The Acopian A11737 is a high-voltage power supply commonly used in older Varian semiconductor equipment. It typically delivers a regulated output of 120V–240V AC and is rated for up to 10A of continuous current. The unit is designed for use in vacuum systems and plasma generation tools, where stable power delivery is critical. It is commonly found in Varian systems from the late 1990s to early 2000s, such as the E21000122 model.
The power supply is generally rated for 10,000–15,000 operational hours before requiring maintenance or replacement. Units with more than 20,000 hours of use may begin to show signs of capacitor degradation or voltage instability. It is typically compatible with Varian systems produced between 1998 and 2004.
It is not compatible with newer models such as the Varian E21000123 or later, which use a different power supply architecture. Installing the A11737 in an incompatible system could result in equipment failure and damage to other components, potentially costing $5,000–$10,000 in repairs.
What to Check Before Buying a Used Acopian A11737 Power Supply Varian Semiconductor Equipment E21000122 New Surplus in 2026
-
Service History and Age: Verify the unit’s production year and operational hours. Units older than 2005 or with more than 20,000 hours of use may be unreliable. A unit with unknown or unverified hours should be treated with caution.
-
Capacitor Health: Use a capacitance meter to test the main filter capacitors. Capacitors should be within 10% of their rated value. If they are swollen or leaking, reject the unit. Capacitor failure can cause voltage spikes and damage downstream components.
-
Voltage Regulation Test: Perform a load test using a variable resistor or power load tester. The output voltage should remain stable within ±2% under full load. Failure to meet this threshold indicates internal degradation.
-
Thermal Management: Check for signs of overheating, such as discolored circuit boards or melted plastic. Units that have operated in high-temperature environments may have reduced lifespan.
-
Warranty and Refurbishment: Only purchase units that come with a 6–12 month warranty. Units refurbished by Ferrotec or Axus Technology are generally more reliable. Reject any unit without a clear refurbishment log.
A poorly tested or unverified unit can lead to unexpected failure during operation, causing $8,000–$12,000 in downtime and repair costs.
FAQ
Q: Can I use the Acopian A11737 in a newer Varian system like the E21000123?
A: No. The E21000123 uses a different power supply model and is not compatible with the A11737. Attempting to install it could cause system failure and cost up to $10,000 in repairs.
Q: Should I buy a used A11737 or wait for a new one?
A: New units are no longer in production, and used or refurbished units are the only viable options. A used unit in good condition can last 5–7 years with proper maintenance.
Q: How long does the A11737 typically last before needing replacement?
A: On average, the unit lasts 10,000–15,000 operational hours. After 20,000 hours, performance may degrade, and replacement is recommended.
Q: What’s the difference between a refurbished and a used A11737?
A: Refurbished units have been tested, cleaned, and repaired by a certified vendor like Ferrotec or Axus Technology. Used units may not have been tested and could fail within the first 1,000 hours.
Q: How much can I save by buying a used A11737 instead of a new one?
A: You can save 40–60%, or $2,000–$3,000, by purchasing a used or refurbished unit. New units are no longer available at OEM pricing.
Related Parts
Varian
Varian 0320-03-01-02 Power Distribution PCB
PN: 0320-03-01-02
Varian
Varian 04298001 Lens Feed Through Assembly
PN: 04298001
Varian
Varian 05927001 Synchronous Motor Control PCB Card
PN: 05927001
Varian
Varian 06993001 System Interface Cable
PN: 06993001
Varian
Varian 100687001 Chamber Top Flange
PN: 100687001
Varian
Varian 101218001 Freon Cooled Assembly
PN: 101218001
Quick Info
Get a Quote
Market: $2K (one observed listing)
Request pricing, availability and any applicable export requirements.
Email parts@caladansemi.comOr call us during business hours
Place a Bid or Ask
Submit your buying or selling requirements for Varian Acopian A11737 Power Supply Varian Semiconductor Equipment E — High-Performance Power Supply for Semiconductor Equipment (Varian).
Confirm export requirements and payment terms before any transaction · parts@caladansemi.com