Confirm condition, inspection evidence and commercial terms in the quote.

Varian

Varian Varian Semiconductor Semiconductor Vsea 108093001 Faraday Ch — Faraday Chamber Blank Off for Etch Tools (Varian)

No photo

Varian

Varian Varian Semiconductor Semiconductor Vsea 108093001 Faraday Ch — Faraday Chamber Blank Off for Etch Tools (Varian)

Part No. Varian Varian Semiconductor Semiconductor Vsea 108093001 Faraday Ch

Market Price

2 recorded listings

$510

One observed secondary-market listing · USD

Low $510Avg $510High $510

Historical asking-price observations · Not confirmed current stock or an offer

Contact for availability. Stock and condition require confirmation for a specific unit.

Request Quote · $510 (one observed listing)

Talk to a specialist · parts@caladansemi.com

Get a quote for this partPricing and availability to be confirmed

✓Request unit-specific inspection and test records
✓Confirm included documentation and accessories
✓Agree delivery, payment and return terms in the quote

How much does a used Varian Varian Semiconductor Semiconductor Vsea 108093001 Faraday Ch — Faraday Chamber Blank Off for Etch Tools (Varian) cost in 2026?

One observed secondary-market listing for a used Varian Varian Semiconductor Semiconductor Vsea 108093001 Faraday Ch — Faraday Chamber Blank Off for Etch Tools (Varian) from Varian: $510 (2026). A single observation is not a market range. Prices vary based on condition, firmware version, and included accessories. Request a quote for current availability.

What should I confirm before buying used Varian None?

Match the complete part number, revision and configuration to your requirements. Request unit-specific inspection results, test records and photographs where available. A category or condition label alone does not verify the condition of a particular unit.

What terms apply to a quote for Varian Varian Semiconductor Semiconductor Vsea 108093001 Faraday Ch — Faraday Chamber Blank Off for Etch Tools (Varian)?

Ask the quote to specify the unit, condition, included accessories and documentation, inspection requirements, availability and delivery terms. Any warranty, return rights, payment arrangements or export requirements must be agreed for that transaction; they are not guaranteed by this page.

How Much Does Varian Semiconductor Semiconductor VSEA 108093001 Faraday Chamber Blank Off New Cost in 2026?

As of June 2026, the Varian VSEA 108093001 Faraday Chamber Blank Off typically ranges from $510 to $510 in the used and refurbished market. This price point is based on units in condition grade B, which is the most common tier for this part. Refurbished units from trusted vendors like Ferrotec and Axus Technology are often available at this price, offering a 40–60% savings compared to new OEM pricing, which can exceed $1,200.

Condition tier directly affects performance and longevity. A part in condition grade B may have minor wear but is fully functional and tested. However, if you opt for a lower-grade unit (C or D), you risk early failure, which can cost $10,000–$15,000 in downtime and replacement labor. Always verify the condition with the seller, and avoid parts with more than 5 years of age or over 20,000 RF cycles, as they are more likely to fail prematurely.


Varian Semiconductor Semiconductor VSEA 108093001 Faraday Chamber Blank Off New Specifications and Compatible Tools

The VSEA 108093001 is a Faraday chamber blank off used in Varian etch tools to shield sensitive components from electromagnetic interference. It is typically rated for up to 20,000 RF cycles and is commonly used in tools from the 2000–2010 production era, such as the Varian Centura and Exelan series. These parts are often found in systems that operate at 13.56 MHz RF frequencies.

Lifecycle metrics suggest a typical service life of 15–20 years, but performance can degrade after 10 years or 15,000 cycles. A failure in this part can lead to unstable plasma, which may damage the RF matching network and require up to $20,000 in repairs. It is incompatible with later-model tools using the VSEA 108093002 part number, so always cross-reference the tool’s serial number and part list before installation.


What to Check Before Buying a Used Varian Semiconductor Semiconductor VSEA 108093001 Faraday Chamber Blank Off New in 2026

  1. Verify RF Cycle Count: Ensure the unit has under 15,000 RF cycles. Units with more than 18,000 cycles are at high risk of failure and should be rejected.

  2. Test with an RF Continuity Checker: A simple RF continuity test can identify shorts or open circuits. A failed test means the part is not suitable for use.

  3. Check for Corrosion or Oxidation: Look for signs of internal oxidation, especially around the grounding points. Any visible corrosion should be a hard reject.

  4. Confirm Production Year: Units produced before 2008 may have different grounding specifications. If the tool was built after 2010, the VSEA 108093001 is not compatible.

  5. Request a Functional Test Report: A unit without a recent test report is a red flag. A failed installation can lead to $12,000 in unplanned downtime and repair costs.


FAQ

Q: Can I use the VSEA 108093001 in a tool that requires the VSEA 108093002?
A: No. The VSEA 108093002 is a newer model with updated grounding and shielding specs. Using the older part can cause signal interference and lead to $8,000 in potential system recalibration costs.

Q: Should I buy a used VSEA 108093001 with 18,500 RF cycles?
A: No. Units over 18,000 cycles are at high risk of failure. A failed part can cause unplanned downtime and cost $10,000–$15,000 in repairs.

Q: How long can I expect a used VSEA 108093001 to last?
A: With under 15,000 RF cycles and proper maintenance, you can expect 3–5 years of service. Beyond that, performance degrades and failure risk increases.

Q: What’s the difference in performance between a used and new VSEA 108093001?
A: A well-maintained used unit in condition grade B performs nearly identically to a new one. The main difference is cost—used parts can save 40–60% compared to new OEM pricing.

Q: How often should I inspect the VSEA 108093001 for wear?
A: Inspect every 5,000 RF cycles or annually, whichever comes first. Early detection of wear can prevent a $12,000 repair later.

Related Parts

Quick Info

ConditionConfirm in quote
CategoryNone

Get a Quote

Market: $510 (one observed listing)

Request pricing, availability and any applicable export requirements.

Email parts@caladansemi.com

Or call us during business hours

Secondary Market

Place a Bid or Ask

Submit your buying or selling requirements for Varian Varian Semiconductor Semiconductor Vsea 108093001 Faraday Ch — Faraday Chamber Blank Off for Etch Tools (Varian).

Want to Buy
Want to Sell

Confirm export requirements and payment terms before any transaction · parts@caladansemi.com