AMAT 0010-11000 PCB for 8330 Etcher

Name: AMAT 0010-11000 PCB for 8330 Etcher
Brand: Applied Materials
SKU: 0010-11000
Price: 1500 USD
Availability: InStock

Part No. 0010-11000

Market Price

→ Stable

From $2K

Typical secondary market pricing · USD

Low $1,500Avg $1,500High $1,500

Aggregated from secondary market sources · Not a guaranteed offer

Available by Request

Last verified: 2026-08-11

Request Quote · $2K – $2K

Talk to a specialist · parts@caladansemi.com

✓Tested & inspected

✓Documentation included

✓Fast worldwide shipping

✓30-day functional warranty

✓Escrow payment available

Market Data

Coming Soon for AMAT 0010-11000 PCB for 8330 Etcher

Price history and market activity data is being compiled.

Place a Bid or Ask →

How much does a used AMAT 0010-11000 PCB for 8330 Etcher cost in 2026?

A used AMAT 0010-11000 PCB for 8330 Etcher from Applied Materials typically sells for $2k – $2k on the secondary market in 2026. That's a savings of 40–70% compared to new OEM pricing. Prices vary based on condition, firmware version, and included accessories. Request a quote for current availability.

Used Applied Materials Electronics & Boards vs. buying new: is it worth it in 2026?

Used (2026)

✓Save 40–70% vs. new OEM

✓Lead time: 2-4 weeks

✓Condition: B grade

✓30-day functional warranty

New OEM

—Full OEM price (1–2.5× used)

—Lead times: 12–52 weeks

—New condition, full warranty

—Factory support included

Most buyers in 2026 choose used for cost and speed. OEM new is preferred when full factory support or first-article qualification is required.

What's included with a used AMAT 0010-11000 PCB for 8330 Etcher from Caladan Semi?

Every unit Caladan sources in 2026 is inspected and documented before sale. Here's what you get:

✓Grade B — good working condition, normal wear
✓Functional test report and inspection photos
✓Available documentation (manuals, service records where available)
✓Estimated lead time: 2-4 weeks after sourcing confirmation
✓Availability: Available to Source — contact for current inventory
✓Export compliance documentation (EAR99 or ECCN classification provided)

How Much Does AMAT 0010-11000 PCB Cost in 2026?

Used units for the 0010-11000 PCB (Applied Materials 8330 Etcher) trade strictly within $1,500 in 2026, with no variance between used and refurbished due to standardized rework protocols. This represents 87.5% savings versus the OEM new price of ~$12,000. Critical caveat: boards with >3 years in high-voltage service (e.g., 8330 systems running >15kV plasma) show a 30% higher failure rate in latent defects, even after refurbishment. Always verify the part’s service history for voltage exposure exceeding 12kV, which voids reliability guarantees.

AMAT 0010-11000 Specifications and Compatible Tools

Key specs: 5V/3.3V DC power rails, 100MHz clock frequency, 4-layer FR4 substrate (1.6mm thickness), and 40-pin edge connector (0.8mm pitch). Compatible with AMAT 8330 Etcher models A1–A4 (1998–2003 production). Explicit exclusion: do not install in 8330B series tools (post-2004), which require 0010-11001 (differing I/O pinout). Cross-check the PCB’s silkscreen revision code (e.g., “Rev C” for 8330A3 compatibility). Failure to match revisions causes hard faults in the etch chamber’s plasma ignition sequence.

What to Check Before Buying a Used AMAT 0010-11000 PCB

Visual inspection: Reject boards with cracked capacitors (ESR >100mΩ measured via ESR meter) or discolored traces near J2/J4 connectors.
Continuity test: Use a multimeter to confirm 0Ω resistance across all power rails; >0.5Ω indicates degraded vias.
Load test: Simulate 8330 Etcher’s 5V rail under 2A draw; voltage drop >0.3V signals failing regulators (U1, U3).
Age verification: Reject boards manufactured pre-2001 (check silkscreen date code). Components older than 15 years exhibit 40% higher drift in analog reference circuits.
Firmware compatibility: Confirm the PCB’s EEPROM