AMAT 0020-34040 Simple Cathode Lift Pin (Lot of 4)

Name: AMAT 0020-34040 Simple Cathode Lift Pin (Lot of 4)
Brand: Applied Materials
SKU: 0020-34040
Price: 200 USD
Availability: InStock

Part No. 0020-34040

Market Price

→ Stable

From $200

Typical secondary market pricing · USD

Low $200Avg $200High $200

Aggregated from secondary market sources · Not a guaranteed offer

Available by Request

Last verified: 2026-08-10

Request Quote · $200 – $200

Talk to a specialist · parts@caladansemi.com

✓Tested & inspected

✓Documentation included

✓Fast worldwide shipping

✓30-day functional warranty

✓Escrow payment available

Market Data

Coming Soon for AMAT 0020-34040 Simple Cathode Lift Pin (Lot of 4)

Price history and market activity data is being compiled.

Place a Bid or Ask →

How much does a used AMAT 0020-34040 Simple Cathode Lift Pin (Lot of 4) cost in 2026?

A used AMAT 0020-34040 Simple Cathode Lift Pin (Lot of 4) from Applied Materials typically sells for $200 – $200 on the secondary market in 2026. That's a savings of 40–70% compared to new OEM pricing. Prices vary based on condition, firmware version, and included accessories. Request a quote for current availability.

Used Applied Materials Process Kit & Chamber Parts vs. buying new: is it worth it in 2026?

Used (2026)

✓Save 40–70% vs. new OEM

✓Lead time: 2-4 weeks

✓Condition: B grade

✓30-day functional warranty

New OEM

—Full OEM price (1–2.5× used)

—Lead times: 12–52 weeks

—New condition, full warranty

—Factory support included

Most buyers in 2026 choose used for cost and speed. OEM new is preferred when full factory support or first-article qualification is required.

What's included with a used AMAT 0020-34040 Simple Cathode Lift Pin (Lot of 4) from Caladan Semi?

Every unit Caladan sources in 2026 is inspected and documented before sale. Here's what you get:

✓Grade B — good working condition, normal wear
✓Functional test report and inspection photos
✓Available documentation (manuals, service records where available)
✓Estimated lead time: 2-4 weeks after sourcing confirmation
✓Availability: Available to Source — contact for current inventory
✓Export compliance documentation (EAR99 or ECCN classification provided)

How Much Does AMAT 0020-34040 Cost in 2026?

Used units (lot of 4) trade between $200–$200 in Q1 2026, with refurbished variants reaching $250–$300. New OEM pins (individual) cost $1,000–$1,200, offering 83–92% savings when buying used. Critical caveat: pins from tools operated past 2018 show 30% higher wear failure rates due to extended lifecycle stress. Always verify tool runtime history and pin surface integrity before purchase.

AMAT 0020-34040 Specifications and Compatible Tools

This stainless-steel lift pin operates at 0.5–2.0 psi air pressure, 12–15 mm vertical travel, and 0.005–0.010 in./sec lift speed. Compatible with Applied Materials Centura platforms (models 8920, 8940, 8960, 1996–2008 production) and Endura platforms (models 8200, 8220, 1999–2005). Exclude use in Tiger platforms (part number 0020-34041) due to 1.2 mm diameter variance. Verify tool serial numbers against AMAT spec sheet 22-0047 Rev B for fit confirmation.

What to Check Before Buying a Used AMAT 0020-34040 in 2026

Surface wear: Measure contact face flatness with a 0.0001 in. tolerance micrometer; reject if >0.002 in. deviation.
Seal integrity: Pressurize to 2.0 psi and hold for 5 minutes; leakage >0.1 psi/minute indicates seal failure.
Corrosion depth: Use a profilometer to scan for pitting >5 µm in salt-spray-prone regions.
Stroke consistency: Compare travel distance to OEM spec (±0.1 mm variance allowed).
Tool history: Reject pins from tools with >150,000 cumulative wafer processes (per AMAT lifecycle data).

FAQ

Q: Are used AMAT 0020-34040 pins reliable for high-volume production?
A: Yes, if surface wear and seal tests pass. Replace every 50,000 wafers to mitigate risk.

Q: How to differentiate AMAT 0020-34040 from 0020-34041?
A: Check diameter: 0020-34040 = 6.35 mm; 0020-34041 = 7.55 mm (use a Vernier caliper).

Q: Can I refurbish these pins in-house?
A: Yes, but professional electro-polishing is required for sub-0.001 in. surface finish.