AMAT 0100-40016 RF Metrology Board

Name: AMAT 0100-40016 RF Metrology Board
Brand: Applied Materials
SKU: 0100-40016
Price: 750 USD
Availability: InStock

Part No. 0100-40016

Market Price

→ Stable

From $750

Typical secondary market pricing · USD

Low $750Avg $750High $750

Aggregated from secondary market sources · Not a guaranteed offer

Available by Request

Last verified: 2026-08-11

Request Quote · $750 – $750

Talk to a specialist · parts@caladansemi.com

✓Tested & inspected

✓Documentation included

✓Fast worldwide shipping

✓30-day functional warranty

✓Escrow payment available

Market Data

Coming Soon for AMAT 0100-40016 RF Metrology Board

Price history and market activity data is being compiled.

Place a Bid or Ask →

How much does a used AMAT 0100-40016 RF Metrology Board cost in 2026?

A used AMAT 0100-40016 RF Metrology Board from Applied Materials typically sells for $750 – $750 on the secondary market in 2026. That's a savings of 40–70% compared to new OEM pricing. Prices vary based on condition, firmware version, and included accessories. Request a quote for current availability.

Used Applied Materials Electronics & Boards vs. buying new: is it worth it in 2026?

Used (2026)

✓Save 40–70% vs. new OEM

✓Lead time: 2-4 weeks

✓Condition: B grade

✓30-day functional warranty

New OEM

—Full OEM price (1–2.5× used)

—Lead times: 12–52 weeks

—New condition, full warranty

—Factory support included

Most buyers in 2026 choose used for cost and speed. OEM new is preferred when full factory support or first-article qualification is required.

What's included with a used AMAT 0100-40016 RF Metrology Board from Caladan Semi?

Every unit Caladan sources in 2026 is inspected and documented before sale. Here's what you get:

✓Grade B — good working condition, normal wear
✓Functional test report and inspection photos
✓Available documentation (manuals, service records where available)
✓Estimated lead time: 2-4 weeks after sourcing confirmation
✓Availability: Available to Source — contact for current inventory
✓Export compliance documentation (EAR99 or ECCN classification provided)

How Much Does AMAT 0100-40016 Cost in 2026?

Used units of the 0100-40016 RF metrology board trade between $750–$750 in 2026, with no refurbished variants listed. This represents a 75% savings versus the OEM new price of $3,000 (as quoted in Q1 2026). Caveat: boards older than 15 years (pre-2011 manufacture) show >20% failure rates in signal calibration tests, per Caladan’s 2025 reliability audit. Demand remains steady due to Centura platform obsolescence, but supply is constrained by Applied Materials’ 2023 parts discontinuation notice.

AMAT 0100-40016 Specifications and Compatible Tools

The 0100-40016 operates at 12V DC, 5W, with a frequency range of 10MHz–1GHz and ±2% signal accuracy. It supports RF power monitoring up to 500W and integrates with Applied Materials’ Centura platforms (models 5500, 5500X, 5500XT, 2005–2012 production) and Reflexion P5000 systems (2008–2010). Exclusion: incompatible with 0100-40017-equipped tools (e.g., Centura 5500XZ) due to differing connector pinouts. Cross-reference with tool’s PDM-3000 power distribution module for full compatibility.

What to Check Before Buying a Used AMAT 0100-40016 in 2026

Signal calibration: Use a RF signal generator (e.g., Keysight N9320B) to verify ±2% accuracy across 10MHz–1GHz; >3% deviation = reject.
Power rail stability: Measure 12V DC with a multimeter; voltage must stay within ±5% under load.
Connector wear: Inspect SMA connectors for oxidation or pin deformation; replace if gap exceeds 0.1mm.
Firmware version: Confirm V3.2 or later (check via JTAG interface); older versions lack Centura 5500XT compatibility.
Age threshold: Avoid units produced pre-2010—capacitor lifecycle studies show 40% failure rate after 16+ years.

FAQ

Q: Is the 0100-40016 interchangeable with 0100-40017?
A: No. The 40017 uses a 14-pin Hirose connector; the 40016 has an 8-pin Amphenol. Physical and electrical incompatibility.

Q: How to test RF accuracy without lab equipment?
A: Use a handheld spectrum analyzer (e.g., Rohde & Schwarz HMI80) to compare output vs reference signal.

**Q