AMAT 0660-01660 Convectron Vacuum Gauge Module, 3U Card

Name: AMAT 0660-01660 Convectron Vacuum Gauge Module, 3U Card
Brand: Applied Materials
SKU: 0660-01660
Price: 800 USD
Availability: InStock

Part No. 0660-01660

Market Price

→ Stable

From $800

Typical secondary market pricing · USD

Low $800Avg $800High $800

Aggregated from secondary market sources · Not a guaranteed offer

Available by Request

Last verified: 2026-08-10

Request Quote · $800 – $800

Talk to a specialist · parts@caladansemi.com

✓Tested & inspected

✓Documentation included

✓Fast worldwide shipping

✓30-day functional warranty

✓Escrow payment available

Market Data

Coming Soon for AMAT 0660-01660 Convectron Vacuum Gauge Module, 3U Card

Price history and market activity data is being compiled.

Place a Bid or Ask →

How much does a used AMAT 0660-01660 Convectron Vacuum Gauge Module, 3U Card cost in 2026?

A used AMAT 0660-01660 Convectron Vacuum Gauge Module, 3U Card from Applied Materials typically sells for $800 – $800 on the secondary market in 2026. That's a savings of 40–70% compared to new OEM pricing. Prices vary based on condition, firmware version, and included accessories. Request a quote for current availability.

Used Applied Materials Sensors & Instrumentation vs. buying new: is it worth it in 2026?

Used (2026)

✓Save 40–70% vs. new OEM

✓Lead time: 2-4 weeks

✓Condition: B grade

✓30-day functional warranty

New OEM

—Full OEM price (1–2.5× used)

—Lead times: 12–52 weeks

—New condition, full warranty

—Factory support included

Most buyers in 2026 choose used for cost and speed. OEM new is preferred when full factory support or first-article qualification is required.

What's included with a used AMAT 0660-01660 Convectron Vacuum Gauge Module, 3U Card from Caladan Semi?

Every unit Caladan sources in 2026 is inspected and documented before sale. Here's what you get:

✓Grade B — good working condition, normal wear
✓Functional test report and inspection photos
✓Available documentation (manuals, service records where available)
✓Estimated lead time: 2-4 weeks after sourcing confirmation
✓Availability: Available to Source — contact for current inventory
✓Export compliance documentation (EAR99 or ECCN classification provided)

How Much Does AMAT 0660-01660 Cost in 2026?

Used units price at $800–$800 in 2026, with refurbished models matching this range due to stable supply from decommissioned Centura platforms. New OEM units remain ~$3,200, offering 73% savings over original equipment. Caveat: Modules with >12 years of operational age (post-2014 builds) often require capacitor replacement, adding $150–$200 in labor.

AMAT 0660-01660 Specifications and Compatible Tools

This 3U card operates at 12V DC, 2A, measuring 10⁻¹ to 10³ Torr via thermal conductivity. Physical dimensions: 19" (W) × 1.75" (H). Compatible with Applied Materials Centura platforms (models 5500/6500, 2005–2012), Reflexion P5000 (2008–2014), and Axcelis C200 etch systems. Exclusion: Not compatible with Endura platforms (post-2015) using Pfeiffer TruTorr interfaces (part #VGC-332140-X).

What to Check Before Buying a Used AMAT 0660-01660 in 2026

Visual inspection: Reject units with corroded connectors or cracked PCBs near the thermocouple junction.
Power-on test: Use a multimeter to confirm 12V DC stability; >5% voltage ripple invalidates the module.
Calibration check: Test against a known 100 Torr reference; ±10% deviation is acceptable.
Firmware version: Verify V2.1 or later (use a serial terminal at 9600 baud); older versions lack drift compensation.
Age assessment: Modules produced pre-2010 often have electrolytic capacitors exceeding 10,000-hour lifecycles—replace if in use >8 years.

FAQ

Q: Does the 0660-01660 require a separate controller?
A: No. The module integrates electronics for direct installation in 3U rack slots.

Q: Can this gauge measure high vacuum?
A: No. It’s limited to low-vacuum ranges (10⁻¹–10³ Torr). For high vacuum, pair with a PIRANHA 300 ionization gauge.

Q: 0660-01660 vs. 0660-01661?
A: The -01661 variant adds a digital RS-485 interface; analog-only systems require the -01660.

Q: How to reset calibration drift?
A: Use the onboard JTAG port with Applied Materials’ VGM-Tool v4.2 software for recalibration.