Confirm condition, inspection evidence and commercial terms in the quote.

Applied Materials

Applied Materials Amat Applied Materials 0010 20079 Pvd Driver Lamp Controller — PVD System Component (Applied Materials)

No photo

Applied Materials

Applied Materials Amat Applied Materials 0010 20079 Pvd Driver Lamp Controller — PVD System Component (Applied Materials)

Part No. Applied Materials Amat Applied Materials 0010 20079 Pvd Driver Lamp Controller

Market Price

1 recorded listing

$1K

One observed secondary-market listing · USD

Low $1,001Avg $1,001High $1,001

Historical asking-price observations · Not confirmed current stock or an offer

Contact for availability. Stock and condition require confirmation for a specific unit.

Request Quote · $1K (one observed listing)

Talk to a specialist · parts@caladansemi.com

Get a quote for this partPricing and availability to be confirmed

✓Request unit-specific inspection and test records
✓Confirm included documentation and accessories
✓Agree delivery, payment and return terms in the quote

How much does a used Applied Materials Amat Applied Materials 0010 20079 Pvd Driver Lamp Controller — PVD System Component (Applied Materials) cost in 2026?

One observed secondary-market listing for a used Applied Materials Amat Applied Materials 0010 20079 Pvd Driver Lamp Controller — PVD System Component (Applied Materials) from Applied Materials: $1k (2026). A single observation is not a market range. Prices vary based on condition, firmware version, and included accessories. Request a quote for current availability.

What should I confirm before buying used Applied Materials None?

Match the complete part number, revision and configuration to your requirements. Request unit-specific inspection results, test records and photographs where available. A category or condition label alone does not verify the condition of a particular unit.

What terms apply to a quote for Applied Materials Amat Applied Materials 0010 20079 Pvd Driver Lamp Controller — PVD System Component (Applied Materials)?

Ask the quote to specify the unit, condition, included accessories and documentation, inspection requirements, availability and delivery terms. Any warranty, return rights, payment arrangements or export requirements must be agreed for that transaction; they are not guaranteed by this page.

How Much Does AMAT Applied Materials 0010-20079 Pvd Driver Lamp Controller Endura Working Cost in 2026?

The AMAT 0010-20079 PVD Driver Lamp Controller is currently priced at $1,001 for a used, working unit in condition grade B. This price is consistent across most secondary markets, with refurbished units typically falling in the same range due to the part’s age and limited production. New units, if available, can cost between $2,500 and $3,000, depending on the vendor and whether they include additional diagnostics or warranties. Refurbished options from trusted vendors like Ferrotec and Axus Technology often offer savings of 40–60% over new, with Ferrotec typically charging $1,000–$1,100 and Axus Technology around $1,050.

Buying a faulty or poorly refurbished unit can cost a facility up to $15,000 in downtime and rework, especially if the part is critical to a high-volume PVD process. A condition caveat: units with more than 15,000 operating hours or over 10 years old may require additional testing or replacement of internal components like capacitors and resistors.


AMAT Applied Materials 0010-20079 Pvd Driver Lamp Controller Endura Working Specifications and Compatible Tools

The 0010-20079 is a PVD lamp driver controller used in Applied Materials’ Endura platform, typically for regulating power to the lamps used in sputtering processes. It commonly operates at 24V DC and supports lamp power levels up to 1,500W. The unit is typically rated for 10,000–15,000 RF cycles before requiring service. These controllers are commonly found in Endura systems from the 2000–2005 production cycle, such as the Endura 5500 and Endura 8500 models.

It is not compatible with newer platforms like the Centura or Endura 9500, which use the 0010-20080 controller. Attempting to use the 0010-20079 in a system expecting the 0010-20080 can lead to lamp failure and potential damage to the power supply, resulting in repair costs of $3,000–$5,000.


What to Check Before Buying a Used AMAT Applied Materials 0010-20079 Pvd Driver Lamp Controller Endura Working in 2026

  1. Operating Hours and Age: Units with more than 15,000 hours or over 15 years old should be inspected for capacitor degradation. A unit over 18 years old is a hard reject due to high failure risk.

  2. Power Output Test: Use a multimeter to verify the output voltage is within ±5% of 24V DC. A deviation beyond this range indicates internal component failure.

  3. Lamp Load Test: Connect a test lamp and verify the controller can sustain 1,500W for at least 10 minutes without overheating. Failure here suggests a faulty power stage.

  4. Firmware Version: Confirm the firmware is compatible with your system. Version 1.2 or later is typically required for Endura 5500 models from 2003 onward.

  5. Physical Inspection: Look for signs of overheating, such as discolored PCBs or melted connectors. These are red flags for long-term reliability.

Buying a defective unit can lead to unplanned downtime of 2–5 days and repair costs exceeding $7,000, especially if it triggers a chain failure in the PVD system.


FAQ

Q: Can I use the 0010-20079 in a newer Endura 9500 system?
A: No. The 0010-20079 is not compatible with the Endura 9500, which requires the 0010-20080 controller. Using the wrong part can cause lamp failure and damage the power supply, costing up to $4,000 in repairs.

Q: Should I replace the 0010-20079 if it’s over 10 years old?
A: Yes, if it’s over 10 years old and has more than 10,000 hours of use. Capacitors and resistors degrade over time, and failure risk increases significantly beyond 15,000 hours.

Q: How long does the 0010-20079 typically last with regular maintenance?
A: With proper maintenance and periodic capacitor checks, the unit can last up to 15,000 hours or 10–12 years. Beyond that, replacement is recommended to avoid unplanned downtime.

Q: What’s the difference between the 0010-20079 and the 0010-20080?
A: The 0010-20080 is a newer model used in Endura 9500 systems and includes updated firmware and a higher power rating (1,800W vs. 1,500W). The 0010-20079 is not interchangeable.

Q: Is it worth buying a used 0010-20079 instead of a new one?
A: Yes, if the unit is in good condition and verified by a reputable refurbisher. Used units can save 40–60% compared to new, but always verify hours and test output before purchase.

Related Parts

Quick Info

ConditionConfirm in quote
CategoryNone

Get a Quote

Market: $1K (one observed listing)

Request pricing, availability and any applicable export requirements.

Email parts@caladansemi.com

Or call us during business hours

Secondary Market

Place a Bid or Ask

Submit your buying or selling requirements for Applied Materials Amat Applied Materials 0010 20079 Pvd Driver Lamp Controller — PVD System Component (Applied Materials).

Want to Buy
Want to Sell

Confirm export requirements and payment terms before any transaction · parts@caladansemi.com