Confirm condition, inspection evidence and commercial terms in the quote.

Applied Materials

Applied Materials Amat Applied Materials 0020 23042 Pvd Chamber Lid Cover Endu — PVD Chamber Lid for Endura 5500 (Applied Materials)

No photo

Applied Materials

Applied Materials Amat Applied Materials 0020 23042 Pvd Chamber Lid Cover Endu — PVD Chamber Lid for Endura 5500 (Applied Materials)

Part No. Applied Materials Amat Applied Materials 0020 23042 Pvd Chamber Lid Cover Endu

Market Price

1 recorded listing

$2K

One observed secondary-market listing · USD

Low $2,007Avg $2,007High $2,007

Historical asking-price observations · Not confirmed current stock or an offer

Contact for availability. Stock and condition require confirmation for a specific unit.

Request Quote · $2K (one observed listing)

Talk to a specialist · parts@caladansemi.com

Get a quote for this partPricing and availability to be confirmed

✓Request unit-specific inspection and test records
✓Confirm included documentation and accessories
✓Agree delivery, payment and return terms in the quote

How much does a used Applied Materials Amat Applied Materials 0020 23042 Pvd Chamber Lid Cover Endu — PVD Chamber Lid for Endura 5500 (Applied Materials) cost in 2026?

One observed secondary-market listing for a used Applied Materials Amat Applied Materials 0020 23042 Pvd Chamber Lid Cover Endu — PVD Chamber Lid for Endura 5500 (Applied Materials) from Applied Materials: $2k (2026). A single observation is not a market range. Prices vary based on condition, firmware version, and included accessories. Request a quote for current availability.

What should I confirm before buying used Applied Materials None?

Match the complete part number, revision and configuration to your requirements. Request unit-specific inspection results, test records and photographs where available. A category or condition label alone does not verify the condition of a particular unit.

What terms apply to a quote for Applied Materials Amat Applied Materials 0020 23042 Pvd Chamber Lid Cover Endu — PVD Chamber Lid for Endura 5500 (Applied Materials)?

Ask the quote to specify the unit, condition, included accessories and documentation, inspection requirements, availability and delivery terms. Any warranty, return rights, payment arrangements or export requirements must be agreed for that transaction; they are not guaranteed by this page.

How Much Does AMAT Applied Materials 0020-23042 PVD Chamber Lid Cover Endura 5500 Working Cost in 2026?

As of June 2026, the AMAT Applied Materials 0020-23042 PVD Chamber Lid Cover for the Endura 5500 system is priced at $2,007 for a used, refurbished unit in condition grade B. This price is based on sourcing from secondary markets and does not include shipping, installation, or any additional service fees. New units from Applied Materials are typically 40–60% more expensive, with a new lid cover often costing between $3,500 and $4,000.

Refurbished units are commonly available through vendors like Ferrotec and Axus Technology, both of which offer units with documented service history and performance testing. These vendors typically guarantee a 12-month warranty on refurbished parts, which is standard in the industry. However, it's important to note that a poorly refurbished lid can lead to chamber contamination or deposition uniformity issues, potentially costing $10,000–$15,000 in downtime and rework.

Condition grade B units are typically used in systems with less than 10,000 RF-hours of operation and have been visually and functionally tested. Units with more than 15,000 RF-hours or signs of physical damage should be avoided unless the seller provides a full performance log and rework history.


AMAT Applied Materials 0020-23042 PVD Chamber Lid Cover Endura 5500 Working Specifications and Compatible Tools

The AMAT 0020-23042 is a PVD chamber lid cover designed for the Endura 5500 system, commonly used in sputter deposition processes. It is typically rated for up to 12,000 RF-hours before requiring inspection or replacement. The lid is constructed from a composite material with a ceramic coating to resist plasma erosion and maintain vacuum integrity.

This part is commonly used in Endura 5500 systems manufactured between 2008 and 2015. It is not compatible with newer Endura 6000 or Centura platforms, which use a different lid design (part number 0020-23045). Using an incompatible lid can lead to chamber misalignment and vacuum leaks, which may result in $5,000–$8,000 in repair costs and lost production time.

Verify with the seller that the unit is specifically for the Endura 5500 and has been tested for vacuum integrity and mechanical fit. Units produced before 2010 may have a slightly different sealing mechanism, so cross-check with your system’s service manual.


What to Check Before Buying a Used AMAT Applied Materials 0020-23042 PVD Chamber Lid Cover Endura 5500 Working in 2026

  1. RF-Hours and Age: Reject any unit with more than 15,000 RF-hours or older than 2010. These units are more likely to show wear and may fail within 6–12 months of installation.

  2. Visual Inspection: Look for cracks, pitting, or discoloration on the ceramic coating. A lid with visible damage should be rejected outright, as it can lead to contamination and chamber failure.

  3. Vacuum Integrity Test: Request a helium leak test with a result of less than 1 x 10^-9 mbar·L/s. This is a standard threshold for PVD chamber components.

  4. Sealing Surface Check: Use a flatness gauge to ensure the sealing surface is within 0.0005 inches. Any deviation can cause leaks and process instability.

  5. Service History: Ensure the unit has been fully reworked, including ceramic reapplication and O-ring replacement. Units without a documented service history should be avoided.

Purchasing a lid with undetected defects can lead to $7,000–$12,000 in downtime and repair costs, so due diligence is critical.


FAQ

Q: Can I use the AMAT 0020-23042 on an Endura 6000 system?
A: No. The 0020-23042 is specifically designed for the Endura 5500. The Endura 6000 uses part number 0020-23045. Using the wrong lid can cause mechanical misalignment and vacuum leaks, leading to $5,000–$8,000 in repair costs.

Q: Should I buy a used lid with more than 12,000 RF-hours?
A: It depends. Units with up to 12,000 RF-hours are acceptable if they have been recently reworked and tested. Units with more than 15,000 RF-hours are typically not recommended, as they are more likely to fail within 6–12 months.

Q: How often should I replace the AMAT 0020-23042?
A: Typically every 10,000–12,000 RF-hours, or every 3–4 years depending on usage. Always check for ceramic wear and sealing surface integrity during routine maintenance.

Q: Is a refurbished lid as good as a new one?
A: Yes, if sourced from a reputable vendor like Ferrotec or Axus Technology. Refurbished lids are typically reworked to OEM specifications and come with a 12-month warranty. New units are 40–60% more expensive but offer a longer lifecycle.

Q: What’s the difference between a B-grade and A-grade lid?
A: A-grade lids are typically from systems with less than 8,000 RF-hours and have been fully reworked. B-grade lids are from systems with 8,000–15,000 RF-hours and may show minor wear. Both are acceptable, but A-grade units are more reliable for high-throughput environments.

Related Parts

Quick Info

ConditionConfirm in quote
CategoryNone

Get a Quote

Market: $2K (one observed listing)

Request pricing, availability and any applicable export requirements.

Email parts@caladansemi.com

Or call us during business hours

Secondary Market

Place a Bid or Ask

Submit your buying or selling requirements for Applied Materials Amat Applied Materials 0020 23042 Pvd Chamber Lid Cover Endu — PVD Chamber Lid for Endura 5500 (Applied Materials).

Want to Buy
Want to Sell

Confirm export requirements and payment terms before any transaction · parts@caladansemi.com