Applied Materials Amat Applied Materials Bifurcated Fiber Cable 2X Fsma Lir80 — Bifurcated Fiber Cable for Semiconductor Equipment (Applied Materials)

How Much Does AMAT APPLIED MATERIALS Bifurcated Fiber Cable 2X FSMA LIR80-600-111 NEW Cost in 2026?

The AMAT APPLIED MATERIALS Bifurcated Fiber Cable 2X FSMA LIR80-600-111 typically ranges from $2,000 to $2,000 in 2026, depending on the condition and source. New units are rarely available directly from Applied Materials, but refurbished options are commonly offered by vendors like Ferrotec and Axus Technology. Refurbished models in condition grade B, like the one currently in sourcing, can save you 40–60% compared to a new unit, which would cost upwards of $3,500–$4,000 if available.

Buying a faulty or poorly refurbished unit can lead to significant downtime—up to 24–48 hours—while waiting for a replacement. A single day of downtime in a high-throughput fab can cost over $100,000, so it's crucial to verify the unit's condition. Units with more than 10,000 hours of use or visible fiber degradation should be avoided unless the vendor provides a full performance warranty.

AMAT APPLIED MATERIALS Bifurcated Fiber Cable 2X FSMA LIR80-600-111 NEW Specifications and Compatible Tools

This bifurcated fiber cable is designed for use in high-precision semiconductor manufacturing systems, typically in Applied Materials’ LIR80 series tools used in the late 2010s. It features a dual-output FSMA connector and is commonly rated for up to 10,000 operational cycles or 10 years of continuous use, depending on environmental conditions.

The cable is typically used in plasma etch and deposition systems to split a single optical signal into two, ensuring accurate signal distribution. It is compatible with tools from 2017 to 2020, such as the LIR80-600-111 model. However, it is not compatible with the LIR80-600-112 due to a different fiber core diameter and connector alignment.

Failure of this cable can result in signal loss or misalignment, leading to process errors and potential wafer rework. A single failed unit can cost up to $5,000 in rework and lost throughput.

What to Check Before Buying a Used AMAT APPLIED MATERIALS Bifurcated Fiber Cable 2X FSMA LIR80-600-111 NEW in 2026

1. Verify the production year: Units made before 2018 may have a higher risk of fiber degradation. Stick to units produced between 2017 and 2020.
2. Check fiber integrity: Use a fiber inspection microscope to look for micro-cracks or contamination. Reject any unit with visible damage.
3. Test signal output: Use a OTDR (Optical Time-Domain Reflectometer) to measure signal loss. Acceptable loss is under 0.5 dB per channel.
4. Confirm connector alignment: Misaligned connectors can cause signal distortion. Ensure both FSMA connectors are properly seated and not bent.
5. Reject if over 10,000 operational cycles: Units beyond this threshold are at high risk of failure and should be avoided unless fully recertified.

Buying a faulty cable can result in a complete signal failure, causing a full tool shutdown and costing up to $100,000 in lost production.

FAQ

Q: Can I use this cable in a LIR80-600-112 system?
A: No. The LIR80-600-112 uses a different fiber core diameter and connector alignment. Using this cable in that system will result in signal misalignment and potential tool failure.

Q: Should I buy a used cable with more than 8,000 hours of use?
A: It depends. If the cable is in condition grade B and has been recertified by a reputable vendor like Ferrotec, it may still be viable. However, units over 10,000 hours should be rejected unless fully refurbished.

Q: How long does this cable typically last in a production environment?
A: Typically, this cable lasts between 8,000 to 10,000 hours of continuous use, or about 5–7 years in a 24/7 fab. Regular visual inspections and OTDR testing are recommended every 2,000 hours.

Q: How does the price of a refurbished unit compare to a new one?
A: A refurbished unit typically costs 40–60% less than a new one. For example, a new unit would cost $3,500–$4,000, while a refurbished one costs around $2,000.

Q: What happens if I install a damaged cable?
A: You could experience signal loss, which may lead to process errors and wafer rework. A single failure can cost up to $5,000 in rework and downtime.