Confirm condition, inspection evidence and commercial terms in the quote.

Applied Materials

Applied Materials Amat Applied Materials Kit 5200 Rps Cvd Faceplate Blocker Pl — 8-Inch CVD Blocker Plate for 5200 RPS Systems (Applied Materials)

No photo

Applied Materials

Applied Materials Amat Applied Materials Kit 5200 Rps Cvd Faceplate Blocker Pl — 8-Inch CVD Blocker Plate for 5200 RPS Systems (Applied Materials)

Part No. Applied Materials Amat Applied Materials Kit 5200 Rps Cvd Faceplate Blocker Pl

Market Price

2 recorded listings

$2K

One observed secondary-market listing · USD

Low $1,504Avg $1,504High $1,504

Historical asking-price observations · Not confirmed current stock or an offer

Contact for availability. Stock and condition require confirmation for a specific unit.

Request Quote · $2K (one observed listing)

Talk to a specialist · parts@caladansemi.com

Get a quote for this partPricing and availability to be confirmed

✓Request unit-specific inspection and test records
✓Confirm included documentation and accessories
✓Agree delivery, payment and return terms in the quote

How much does a used Applied Materials Amat Applied Materials Kit 5200 Rps Cvd Faceplate Blocker Pl — 8-Inch CVD Blocker Plate for 5200 RPS Systems (Applied Materials) cost in 2026?

One observed secondary-market listing for a used Applied Materials Amat Applied Materials Kit 5200 Rps Cvd Faceplate Blocker Pl — 8-Inch CVD Blocker Plate for 5200 RPS Systems (Applied Materials) from Applied Materials: $2k (2026). A single observation is not a market range. Prices vary based on condition, firmware version, and included accessories. Request a quote for current availability.

What should I confirm before buying used Applied Materials None?

Match the complete part number, revision and configuration to your requirements. Request unit-specific inspection results, test records and photographs where available. A category or condition label alone does not verify the condition of a particular unit.

What terms apply to a quote for Applied Materials Amat Applied Materials Kit 5200 Rps Cvd Faceplate Blocker Pl — 8-Inch CVD Blocker Plate for 5200 RPS Systems (Applied Materials)?

Ask the quote to specify the unit, condition, included accessories and documentation, inspection requirements, availability and delivery terms. Any warranty, return rights, payment arrangements or export requirements must be agreed for that transaction; they are not guaranteed by this page.

How Much Does AMAT Applied Materials Kit 5200 RPS CVD Faceplate Blocker Plate 8" Cost in 2026?

The 8-inch AMAT Applied Materials Kit 5200 RPS CVD Faceplate Blocker Plate typically ranges from $1,504 for a B-grade used unit to $2,200–$2,800 for A-grade refurbished parts in 2026. Refurbished units from vendors like Ferrotec and Axus Technology often fall into the $1,800–$2,100 range, offering 40–60% savings compared to new OEM pricing ($3,000–$4,000).

Buying a subpar unit (e.g., C-grade with pitting or >7,000 RF cycles) can lead to $5,000+ in downtime costs if it fails during a production run. Note that the listed $1,504 price assumes a B-grade part with <5,000 RF cycles and minimal surface oxidation. Always verify the part’s production year (pre-2010 models may have thinner plating) and RF-hour count before purchase.


AMAT Applied Materials Kit 5200 RPS CVD Faceplate Blocker Plate 8" Specifications and Compatible Tools

This 8-inch blocker plate is typically 316L stainless steel with a 0.5-inch thickness, designed for Applied Materials 5200 RPS CVD systems (models produced 2005–2012). It commonly supports 5,000–7,000 RF cycles before requiring replacement, though older units (pre-2008) may degrade faster due to thinner plating.

Compatible tools include the 5200 RPS CVD Cluster Tool and 5200 RPS Centura® system, but it is not compatible with the 5200-000123 APCVD variant due to a 0.2-inch port offset. Failure during operation—often caused by thermal stress or pitting—can lead to $10,000+ in downtime and $2,000+ in labor costs for emergency replacement. Verify the part’s serial number prefix (AM-5200-RPS) to ensure compatibility.


What to Check Before Buying a Used AMAT Applied Materials Kit 5200 RPS CVD Faceplate Blocker Plate 8" in 2026

  1. Production Year: Reject units made before 2008 (prone to <0.45-inch thickness).
  2. Surface Inspection: Use a magnifier (10x) to check for pitting >0.1mm or cracks.
  3. RF Cycle Count: Reject if >7,000 cycles (use a cycle counter log or ask for maintenance records).
  4. Electrical Test: Perform a 4-point ohmmeter test (resistance should be <0.05 ohms).
  5. Pressure Test: Conduct a 10-psi nitrogen leak test for 5 minutes—fail if >0.1 psi drop.

Buying a unit with unverified RF cycles or pre-2008 manufacturing can result in $7,000+ in production losses due to unexpected failure. Always request a certified refurbishment report from vendors like Covalent Materials.


FAQ

Q: Is a used 5200 RPS blocker plate as reliable as a new one?
A: A B-grade used unit with <5,000 RF

Related Parts

Quick Info

ConditionConfirm in quote
CategoryNone

Get a Quote

Market: $2K (one observed listing)

Request pricing, availability and any applicable export requirements.

Email parts@caladansemi.com

Or call us during business hours

Secondary Market

Place a Bid or Ask

Submit your buying or selling requirements for Applied Materials Amat Applied Materials Kit 5200 Rps Cvd Faceplate Blocker Pl — 8-Inch CVD Blocker Plate for 5200 RPS Systems (Applied Materials).

Want to Buy
Want to Sell

Confirm export requirements and payment terms before any transaction · parts@caladansemi.com