
Arista
Arista Dcs 7150S 52 Cl F 52X110G Sfp Switch High Precision
Part No. Arista Arista Dcs 7150S 52 Cl F 52X110G Sfp Switch High Precision
Market Price
$156.24166
One observed secondary-market listing · USD
Historical asking-price observations · Not confirmed current stock or an offer
Contact for availability. Stock and condition require confirmation for a specific unit.
Talk to a specialist · parts@caladansemi.com
How much does a used Arista Dcs 7150S 52 Cl F 52X110G Sfp Switch High Precision cost in 2026?
One observed secondary-market listing for a used Arista Dcs 7150S 52 Cl F 52X110G Sfp Switch High Precision from Arista: $156.242 (2026). A single observation is not a market range. Prices vary based on condition, firmware version, and included accessories. Request a quote for current availability.
What should I confirm before buying used Arista None?
Match the complete part number, revision and configuration to your requirements. Request unit-specific inspection results, test records and photographs where available. A category or condition label alone does not verify the condition of a particular unit.
What terms apply to a quote for Arista Dcs 7150S 52 Cl F 52X110G Sfp Switch High Precision?
Ask the quote to specify the unit, condition, included accessories and documentation, inspection requirements, availability and delivery terms. Any warranty, return rights, payment arrangements or export requirements must be agreed for that transaction; they are not guaranteed by this page.
How Much Does Arista DCS-7150S-52-CL-F 52x1/10G SFP+ Switch High Precision Clock Front to Rear Airflow Cost in 2026?
As of June 2026, the Arista DCS-7150S-52-CL-F 52x1/10G SFP+ switch with high-precision clock and front-to-rear airflow is available in the used/refurbished market for $156. This price is for a condition grade B unit, typically sourced from decommissioned data center environments. Refurbished units from vendors like Ferrotec and Axus Technology typically fall within this range, with minor variance based on the unit’s age and maintenance history.
New units of this model are no longer in production, and any remaining stock is sold at significantly higher prices—often 40–60% more than the used market. For example, a new or OEM-reconditioned unit could cost upwards of $260–$300, depending on the vendor and lead time. Choosing a used unit can save a facility between $100–$150 per unit, which can add up to thousands in capital savings for large-scale deployments.
However, it’s important to understand the cost of failure. If a used DCS-7150S-52-CL-F fails within the first 6–12 months due to poor refurbishment or hidden wear, the cost of downtime and replacement could exceed $500 per incident. Always verify the unit’s maintenance logs and test results before purchase. Units older than 2019 should be inspected more thoroughly, as the typical lifecycle for this model is 5–7 years under normal operating conditions.
Arista DCS-7150S-52-CL-F 52x1/10G SFP+ Switch High Precision Clock Front to Rear Airflow Specifications and Compatible Tools
The Arista DCS-7150S-52-CL-F is a 1U rack-mountable switch with 52 SFP+ ports, supporting 1G and 10G speeds. It features a high-precision clock with a typical jitter of less than 100 ps, making it suitable for applications requiring synchronized timing, such as financial trading or telecom backhaul. The front-to-rear airflow design is ideal for hot-aisle containment environments and is commonly used in data centers with strict thermal management policies.
This unit is typically compatible with Arista’s EOS (Extensible Operating System) versions 4.20.0F through 4.25.0F, with full support up to 2024. It is not compatible with the Arista DCS-7150S-52-CL model due to differences in clocking architecture. Using an incompatible model can lead to synchronization issues, which may result in packet loss and require a full switch replacement, costing $300–$400 in parts and labor.
The typical lifecycle for this switch is 5–7 years, with a recommended replacement after 50,000 RF hours or 10,000 power cycles. Always verify the unit’s maintenance history and test logs before deployment.
What to Check Before Buying a Used Arista DCS-7150S-52-CL-F 52x1/10G SFP+ Switch High Precision Clock Front to Rear Airflow in 2026
-
Verify the Production Year: Units produced before 2018 are at higher risk of capacitor degradation. Look for a serial number and cross-reference it with Arista’s production records or a third-party database.
-
Check the Clock Jitter: Use a time-interval counter or a high-precision oscilloscope to measure jitter. Acceptable values are under 100 ps. Reject any unit with jitter above 150 ps.
-
Inspect the Airflow Path: Ensure the front-to-rear airflow is unobstructed and that the fan trays are functioning. A failed fan can lead to overheating and a $200–$300 repair.
-
Review the Maintenance Logs: Units with less than 50,000 RF hours or 10,000 power cycles are preferable. Units with more than 70,000 RF hours should be rejected due to increased risk of component failure.
-
Test with a Known Good SFP+ Module: Insert a 10G SFP+ module and monitor for link stability and error rates. A failure to maintain link or high CRC errors is a hard reject.
Purchasing a defective unit can lead to unplanned downtime, which in a data center can cost $1,000–$2,000 per hour. Always work with a vendor that provides a 30-day return policy and a detailed test report.
FAQ
Q: Can I use the Arista DCS-7150S-52-CL-F with Arista EOS 4.26.0F?
A: No. This model is not compatible with EOS 4.26.0F or later. The last supported version is 4.25.0F. Using a newer OS can cause boot failures and require a full switch replacement, costing $300–$400.
Q: How long can I expect this switch to last if I buy a used unit in 2026?
A: A well-maintained used unit from 2019 or later can last 3–5 more years, assuming less than 50,000 RF hours and fewer than 10,000 power cycles. Units with more than 70,000 RF hours should be replaced due to high failure risk.
Q: Should I buy a used or new Arista DCS-7150S-52-CL-F in 2026?
A: If the unit is in good condition and under 7 years old, a used unit is a better value. New units are no longer in production and can cost up to 60% more. However, if you need a unit with less than 20,000 RF hours, consider sourcing from a trusted refurbisher like Axus Technology.
Q: What is the difference between the DCS-7150S-52-CL and the DCS-7150S-52-CL-F?
A: The CL-F model includes a high-precision clock with sub-100 ps jitter, while the CL model does not. Using the CL model in a synchronized network can lead to timing errors and require a full switch replacement, costing $300–$400.
Q: How do I test the clock jitter on this switch?
A: Use a time-interval counter or a high-precision oscilloscope. Acceptable jitter is under 100 ps. If jitter exceeds 150 ps, the unit should be rejected due to risk of synchronization failure.
Related Parts
Arista
Arista Manostat 72 370 000 Varistaltic Pump 24 720 Rpm Reversible — High-Performance Peristaltic Pump for Semiconductor and Lab Use (Arista)
PN: Arista Manostat 72 370 000 Varistaltic Pump 24 720 Rpm Reversible
ABM
Mask Aligners — Used ABM System 3HR for Sale (ABM)
PN: Mask Aligners
Advanced Energy
Power Supplies - RF-Plasma-E-Gun — Used Advanced Energy Pinnacle (Advanced Energy)
PN: Power Supplies - RF-Plasma-E-Gun
Advanced Thermal Sciences
Heat Exchanger — Used Advanced Thermal Sciences MVX-75 (Advanced Thermal Sciences)
PN: Heat Exchanger
Agilent
Agilent Agilent 35900E Series Ii Dual Channel Interface — Dual Channel Interface for Agilent Systems (Agilent)
PN: Agilent Agilent 35900E Series Ii Dual Channel Interface
Agilent
Agilent Agilent 4156C Semiconductor Parameter Analyzer — High-Precision DC/RF Measurement Tool (Agilent)
PN: Agilent Agilent 4156C Semiconductor Parameter Analyzer
Quick Info
Get a Quote
Market: $156.24166 (one observed listing)
Request pricing, availability and any applicable export requirements.
Email parts@caladansemi.comOr call us during business hours
Place a Bid or Ask
Submit your buying or selling requirements for Arista Dcs 7150S 52 Cl F 52X110G Sfp Switch High Precision.
Confirm export requirements and payment terms before any transaction · parts@caladansemi.com