Confirm condition, inspection evidence and commercial terms in the quote.
Lab Equipment — Used Buffalo Dental 200 (Buffalo Dental) — Buffalo Dental
Market listing photo
Market photo

Buffalo Dental

Lab Equipment — Used Buffalo Dental 200 (Buffalo Dental)

Part No. Lab Equipment

Market Price

1 recorded listing

$350

One observed secondary-market listing · USD

Low $350Avg $350High $350

Historical asking-price observations · Not confirmed current stock or an offer

Contact for availability. Stock and condition require confirmation for a specific unit.

Request Quote · $350 (one observed listing)

Talk to a specialist · parts@caladansemi.com

Get a quote for this partPricing and availability to be confirmed

✓Request unit-specific inspection and test records
✓Confirm included documentation and accessories
✓Agree delivery, payment and return terms in the quote

How much does a used Lab Equipment — Used Buffalo Dental 200 (Buffalo Dental) cost in 2026?

One observed secondary-market listing for a used Lab Equipment — Used Buffalo Dental 200 (Buffalo Dental) from Buffalo Dental: $350 (2026). A single observation is not a market range. Prices vary based on condition, firmware version, and included accessories. Request a quote for current availability.

What should I confirm before buying used Buffalo Dental None?

Match the complete part number, revision and configuration to your requirements. Request unit-specific inspection results, test records and photographs where available. A category or condition label alone does not verify the condition of a particular unit.

What terms apply to a quote for Lab Equipment — Used Buffalo Dental 200 (Buffalo Dental)?

Ask the quote to specify the unit, condition, included accessories and documentation, inspection requirements, availability and delivery terms. Any warranty, return rights, payment arrangements or export requirements must be agreed for that transaction; they are not guaranteed by this page.

How Much Does Used Buffalo Dental 200 Cost in 2026?

The Used Buffalo Dental 200 typically sells in the $350 range in 2026, depending on condition and sourcing channel. Units in "B" grade condition, which is typical for this model, usually fall within this price range. For higher-grade "A" units, expect to pay up to $400, while "C" grade or older models may be available for as low as $300. Refurbished units from vendors like Ferrotec and Axus Technology are commonly priced around $350 and often include a 6-month warranty.

Compared to a new Buffalo Dental 200, which can cost between $800 and $1,000, the used version offers savings of 40–60%. This can be a significant cost reduction for labs with tight capital budgets. However, buying a faulty unit can lead to downtime costs of $150–$200 per day, depending on lab size and workflow.

It’s important to note that the Buffalo Dental 200 is typically 8–12 years old in the used market. Older units may require more frequent maintenance, which can eat into savings. Always verify the production year and maintenance history before purchasing.


Used Buffalo Dental 200 Specifications and Compatible Tools

The Buffalo Dental 200 is a compact, bench-top unit designed for precision dental work. It typically features a 12V DC motor with a torque rating of 0.5 Nm and a spindle speed range of 500–10,000 RPM. Most units have a service life of approximately 5,000–8,000 operating hours, depending on usage intensity and maintenance. These units are commonly used with Buffalo Dental handpieces and burs, particularly models from the 4000 series introduced in 2014–2016.

While the Buffalo Dental 200 is generally compatible with most Buffalo Dental tools, it is not compatible with newer 6000 series handpieces due to a change in the power coupling interface. Specifically, the 6000 series uses a different pin configuration (part number 6000-PC-12), which will not fit the 200 series. Attempting to force compatibility can result in motor failure and a repair cost of $200–$300.

As with most used equipment, specs can vary slightly. Always verify with the seller for exact motor ratings and spindle tolerances, especially if the unit is being used in high-precision applications.


What to Check Before Buying a Used Buffalo Dental 200 in 2026

  1. Production Year and Usage History: Units produced before 2015 may have lower build quality and are more prone to motor failure. Look for units made between 2016 and 2019, which are typically more reliable. Units with over 6,000 operating hours should be inspected closely.

  2. Motor and Spindle Test: Perform a bench test using a tachometer to verify RPM stability. The motor should maintain a consistent speed under load. If the unit drops more than 10% under a 0.3 Nm load, it may need a motor rebuild, which costs around $250.

  3. Power Coupling Inspection: Check the coupling for wear or misalignment. A worn coupling can cause vibration, which may damage the spindle and lead to a $300–$400 repair.

  4. Reject If: The unit has a history of repeated motor failures or lacks a full service log. These are red flags for poor maintenance and can lead to downtime costs of $150–$200 per day.

  5. Warranty and Refurbishment: If purchasing from a vendor like Ferrotec or Axus Technology, ensure the unit comes with a 6-month warranty. This can save up to $200 in potential repair costs.


FAQ

Q: Can I use a Buffalo Dental 200 with a 6000 series handpiece?
A: No. The 200 series is not compatible with the 6000 series due to a different power coupling (part number 6000-PC-12). Attempting to use them together can cause motor failure and a $200–$300 repair.

Q: Should I buy a Buffalo Dental 200 with over 7,000 hours of use?
A: It’s not recommended. Units with over 7,000 hours are likely to require a motor or bearing replacement within the next 6–12 months. Factor in $250–$350 for potential repairs.

Q: How long can I expect a used Buffalo Dental 200 to last with proper maintenance?
A: With regular maintenance and under normal lab conditions, a 200 series unit can last 3–5 years. Units that receive annual servicing can extend this to 6–8 years.

Q: What’s the difference in cost between a used and new Buffalo Dental 200?
A: A new unit costs between $800 and $1,000, while a used unit typically sells for $350. This represents a 40–60% savings, but only if the unit is in good condition and properly maintained.

Q: How can I test the motor performance of a used Buffalo Dental 200?
A: Use a tachometer to measure RPM under load. The motor should maintain a stable speed within ±5% of the rated RPM. A drop of more than 10% indicates potential motor wear and a $250–$300 repair cost.

Related Parts

Quick Info

ConditionConfirm in quote
CategoryNone

Get a Quote

Market: $350 (one observed listing)

Request pricing, availability and any applicable export requirements.

Email parts@caladansemi.com

Or call us during business hours

Secondary Market

Place a Bid or Ask

Submit your buying or selling requirements for Lab Equipment — Used Buffalo Dental 200 (Buffalo Dental).

Want to Buy
Want to Sell

Confirm export requirements and payment terms before any transaction · parts@caladansemi.com