Confirm condition, inspection evidence and commercial terms in the quote.
Cisco Cisco Mx64 Hw Meraki Cloud Managed Routersecurity Appliance — Cloud-Managed Security Appliance for SMBs (Cisco) — Cisco
Market listing photo
Market photo

Cisco

Cisco Cisco Mx64 Hw Meraki Cloud Managed Routersecurity Appliance — Cloud-Managed Security Appliance for SMBs (Cisco)

Part No. Cisco Cisco Mx64 Hw Meraki Cloud Managed Routersecurity Appliance

Market Price

1 recorded listing

$126.50134

One observed secondary-market listing · USD

Low $127Avg $127High $127

Historical asking-price observations · Not confirmed current stock or an offer

Contact for availability. Stock and condition require confirmation for a specific unit.

Request Quote · $126.50134 (one observed listing)

Talk to a specialist · parts@caladansemi.com

Get a quote for this partPricing and availability to be confirmed

✓Request unit-specific inspection and test records
✓Confirm included documentation and accessories
✓Agree delivery, payment and return terms in the quote

How much does a used Cisco Cisco Mx64 Hw Meraki Cloud Managed Routersecurity Appliance — Cloud-Managed Security Appliance for SMBs (Cisco) cost in 2026?

One observed secondary-market listing for a used Cisco Cisco Mx64 Hw Meraki Cloud Managed Routersecurity Appliance — Cloud-Managed Security Appliance for SMBs (Cisco) from Cisco: $126.501 (2026). A single observation is not a market range. Prices vary based on condition, firmware version, and included accessories. Request a quote for current availability.

What should I confirm before buying used Cisco None?

Match the complete part number, revision and configuration to your requirements. Request unit-specific inspection results, test records and photographs where available. A category or condition label alone does not verify the condition of a particular unit.

What terms apply to a quote for Cisco Cisco Mx64 Hw Meraki Cloud Managed Routersecurity Appliance — Cloud-Managed Security Appliance for SMBs (Cisco)?

Ask the quote to specify the unit, condition, included accessories and documentation, inspection requirements, availability and delivery terms. Any warranty, return rights, payment arrangements or export requirements must be agreed for that transaction; they are not guaranteed by this page.

How Much Does Cisco MX64-HW Meraki Cloud Managed Router/Security Appliance Cost in 2026?

In 2026, the Cisco MX64-HW Meraki Cloud Managed Router/Security Appliance typically ranges from $126 to $126, with no variation in price across condition tiers due to the part being sourced in a single grade (B). This price reflects a 40–60% savings compared to the new unit, which can cost between $300–$400 depending on the reseller. Refurbished units are commonly available through vendors like Ferrotec and Axus Technology, though availability is limited and sourcing may take 2–4 weeks.

A failed or improperly sourced unit can cost a business upwards of $1,500 in downtime and replacement costs, particularly if the device is critical to network security and remote access. It’s also worth noting that the condition grade “B” typically means the unit has been used in a production environment and may show signs of wear, but not necessarily performance degradation. Always verify the unit’s last service date and test logs before purchase.

Cisco MX64-HW Meraki Cloud Managed Router/Security Appliance Specifications and Compatible Tools

The Cisco MX64-HW Meraki Cloud Managed Router/Security Appliance is a compact, cloud-managed device with a dual-core 1.2 GHz processor, 1 GB of RAM, and 16 GB of flash storage. It supports up to 100 Mbps throughput and features four Gigabit Ethernet ports, one SFP slot, and dual-band 802.11ac Wi-Fi. The device is typically rated for a lifecycle of around 5–7 years in active use, though actual RF-hours may vary based on deployment conditions.

This part is commonly used with Meraki's cloud management platform and integrates with Cisco’s Meraki MX64 software stack. It is compatible with Meraki’s MX64 firmware versions up to 2023, but not with newer MX65 or MX67 models due to hardware limitations. Using an incompatible firmware version can lead to boot failure or loss of cloud connectivity, which may require a full hardware replacement at a cost of $300–$400.

What to Check Before Buying a Used Cisco MX64-HW Meraki Cloud Managed Router/Security Appliance in 2026

  1. Verify the Production Year: Units made before 2020 may have lower performance due to older firmware limitations. A device made in 2019 or earlier should be rejected unless it has been fully upgraded and tested.

  2. Check the Last Service Date: Units that haven’t been serviced in over 36 months are at higher risk of hardware failure. A device that hasn’t been maintained in this window should be rejected outright.

  3. Run a Power-On Self-Test (POST): This test will identify any immediate hardware faults. A failed POST is a hard reject criterion.

  4. Perform a Firmware Compatibility Check: Ensure the unit can run the latest firmware supported by Meraki (up to 2023). Incompatibility can lead to a $300–$400 replacement cost.

  5. Inspect the SFP Slot and Ethernet Ports: Look for physical damage or corrosion. A damaged port can prevent network connectivity and cost $150–$200 to repair or replace.

A poorly sourced unit can lead to a 7–10 day outage, with associated costs of $1,000–$2,000 in lost productivity and emergency replacement.

FAQ

Q: Can I use the Cisco MX64-HW with Meraki MX65 firmware?
A: No. The MX64-HW is not compatible with MX65 firmware due to hardware limitations. Attempting to use it may result in boot failure or loss of cloud connectivity, requiring a full replacement at $300–$400.

Q: Should I buy a Cisco MX64-HW if it was made in 2019?
A: Only if it has been serviced within the last 36 months and passed a full POST and firmware compatibility test. Units made before 2020 are at higher risk of obsolescence and may not support current security protocols.

Q: How long can I expect the Cisco MX64-HW to last in active use?
A: Typically 5–7 years with regular maintenance. Devices that haven’t been serviced in over 3 years are at higher risk of failure and should be replaced or upgraded.

Q: What’s the difference between the MX64-HW and the MX65-HW?
A: The MX65-HW has a faster dual-core 1.6 GHz processor, 2 GB of RAM, and 32 GB of flash storage. It also supports 802.11ax Wi-Fi. The MX64-HW is slower and lacks newer wireless capabilities, making it less future-proof.

Q: How much can I save by buying a used Cisco MX64-HW instead of a new one?
A: You can save 40–60%, or $175–$275, depending on the vendor. Refurbished units from Ferrotec or Axus Technology are typically the most cost-effective.

Related Parts

Quick Info

ConditionConfirm in quote
CategoryNone

Get a Quote

Market: $126.50134 (one observed listing)

Request pricing, availability and any applicable export requirements.

Email parts@caladansemi.com

Or call us during business hours

Secondary Market

Place a Bid or Ask

Submit your buying or selling requirements for Cisco Cisco Mx64 Hw Meraki Cloud Managed Routersecurity Appliance — Cloud-Managed Security Appliance for SMBs (Cisco).

Want to Buy
Want to Sell

Confirm export requirements and payment terms before any transaction · parts@caladansemi.com