Cisco Cisco N9K C92160Yc X Nexus 92160Yc X 48 Port 11025Gbe Sf — 48-Port 1/10/25GBE Switch (Cisco)

How Much Does Cisco N9K-C92160YC-X Nexus 92160YC-X - 48-Port 1/10/25GBE SFP+ QSFP28 Switch Cost in 2026?

As of June 2026, the Cisco N9K-C92160YC-X Nexus 92160YC-X - 48-Port 1/10/25GBE SFP+ QSFP28 Switch is priced in the range of $1,193 for a used, refurbished unit in grade B condition. This price is typically offered by vendors like Ferrotec and Axus Technology, who specialize in high-quality, tested Cisco networking hardware. Compared to the new unit, which can cost between $2,500 and $3,000, you can expect to save between 40% and 60% by purchasing a used, refurbished model.

However, it's important to note that the cost of failure can be significant. If a used switch fails within the first 6 months of deployment, the downtime and replacement costs could exceed $5,000, especially in mission-critical environments. Units with a condition grade lower than B (e.g., C or D) may have a higher risk of early failure and should be inspected more thoroughly. Always verify the refurbishment process and the vendor's return policy before purchasing.

Cisco N9K-C92160YC-X Nexus 92160YC-X - 48-Port 1/10/25GBE SFP+ QSFP28 Switch Specifications and Compatible Tools

The Cisco N9K-C92160YC-X is a 48-port switch supporting 1/10/25GBE speeds via SFP+ and QSFP28 ports. It typically features a modular design with a maximum power consumption of around 150W. The switch is commonly used in data centers and high-performance computing environments, with a typical lifecycle of 5 to 7 years, depending on usage and maintenance.

This model is compatible with Cisco Nexus 9000 Series switches and typically works with Cisco N9K-C9300 Series switches from 2018 onward. However, it is not compatible with older models such as the N9K-C92160YC (pre-2017), which uses a different backplane and power architecture. If used incorrectly, this incompatibility could lead to a complete rack failure, with potential downtime costs exceeding $10,000 per hour in high-traffic environments.

Always verify the exact model and firmware compatibility with your existing infrastructure before deployment.

What to Check Before Buying a Used Cisco N9K-C92160YC-X Nexus 92160YC-X - 48-Port 1/10/25GBE SFP+ QSFP28 Switch in 2026

1. Production Year: Ensure the unit was manufactured between 2018 and 2021. Units older than 2017 may have outdated components and are more prone to failure.

2. Firmware and BIOS Version: Check that the firmware is at least version 9.3(7) or higher. Older versions may lack critical security patches and performance optimizations.

3. Power Supply and Fan Health: Use a thermal imaging camera and a multimeter to test the power supply and fan operation. Any fan with a failure rate above 10% should be a red flag.

4. Port Functionality: Conduct a full port test using a loopback tester and a network traffic generator. At least 90% of ports must pass the test to be considered acceptable.

5. Reject If: The unit has been returned more than twice in its lifecycle. This is a strong indicator of recurring issues and can lead to a failure within the first 3 months of use, costing up to $8,000 in lost productivity.

FAQ

Q: Can I use the Cisco N9K-C92160YC-X with a Cisco N9K-C93160YC-EX?
A: Yes, but only if the N9K-C93160YC-EX is running firmware version 9.3(8) or higher. Earlier versions may lack the necessary compatibility updates, which could result in a failed stack configuration and up to $7,000 in downtime.

Q: Should I replace the power supply when installing a used Cisco N9K-C92160YC-X?
A: Yes, especially if the unit is over 5 years old. Power supplies older than 5 years have a failure rate of over 20%, which can lead to sudden shutdowns and data loss.

Q: How long can I expect a used Cisco N9K-C92160YC-X to last in a data center?
A: With proper maintenance and a clean power supply, you can expect 3 to 5 years of reliable operation. Beyond that, the risk of component failure increases significantly, potentially costing $6,000 or more in repairs or replacements.

Q: Is the Cisco N9K-C92160YC-X suitable for 100G environments?
A: No, it is not. The switch is limited to 25GBE per port and cannot support 100G speeds. Using it in a 100G environment could result in performance bottlenecks and require additional hardware, adding $2,000 to $3,000 in unexpected costs.

Q: How does the Cisco N9K-C92160YC-X compare to the N9K-C93160YC-EX?
A: The N9K-C93160YC-EX offers 96 ports and 100G support, while the N9K-C92160YC-X is limited to 48 ports and 25G. The newer model is more expensive but offers better scalability. The older model is a cost-effective option for environments with lower bandwidth needs.