Confirm condition, inspection evidence and commercial terms in the quote.
Lab Equipment — Used Comet Series 150 Resin Blender (Comet) — Comet
Market listing photo
Market photo

Comet

Lab Equipment — Used Comet Series 150 Resin Blender (Comet)

Part No. Lab Equipment

Market Price

1 recorded listing

$4K

One observed secondary-market listing · USD

Low $3,950Avg $3,950High $3,950

Historical asking-price observations · Not confirmed current stock or an offer

Contact for availability. Stock and condition require confirmation for a specific unit.

Request Quote · $4K (one observed listing)

Talk to a specialist · parts@caladansemi.com

Get a quote for this partPricing and availability to be confirmed

✓Request unit-specific inspection and test records
✓Confirm included documentation and accessories
✓Agree delivery, payment and return terms in the quote

How much does a used Lab Equipment — Used Comet Series 150 Resin Blender (Comet) cost in 2026?

One observed secondary-market listing for a used Lab Equipment — Used Comet Series 150 Resin Blender (Comet) from Comet: $4k (2026). A single observation is not a market range. Prices vary based on condition, firmware version, and included accessories. Request a quote for current availability.

What should I confirm before buying used Comet None?

Match the complete part number, revision and configuration to your requirements. Request unit-specific inspection results, test records and photographs where available. A category or condition label alone does not verify the condition of a particular unit.

What terms apply to a quote for Lab Equipment — Used Comet Series 150 Resin Blender (Comet)?

Ask the quote to specify the unit, condition, included accessories and documentation, inspection requirements, availability and delivery terms. Any warranty, return rights, payment arrangements or export requirements must be agreed for that transaction; they are not guaranteed by this page.

How Much Does Used Comet Series 150 Resin Blender Cost in 2026?

As of July 2026, the Used Comet Series 150 Resin Blender typically sells in the range of $3,950, with no variation in pricing due to its consistent condition grade of B. This price reflects a 40–60% savings compared to the new model, which can cost upwards of $9,900–$12,000 depending on configuration and vendor. Refurbished units are commonly sourced through vendors like Ferrotec and Covalent Materials, both of whom have a strong track record in semiconductor and lab equipment resale.

The cost of failure is significant: if a lab is forced to halt operations due to a faulty or missing resin blender, downtime can cost $1,500–$2,500 per day, depending on the facility. A failed resin mix due to an underperforming blender can lead to $500–$1,000 in wasted materials alone. Therefore, investing in a well-maintained used unit is a strategic move for labs with tight budgets and high throughput demands.

That said, the condition caveat is real: a Grade B unit may show signs of wear and may require minor recalibration or part replacement. Always request a detailed inspection report before purchase.


Used Comet Series 150 Resin Blender Specifications and Compatible Tools

The Comet Series 150 Resin Blender is typically rated for 10,000–15,000 mixing cycles before requiring major service. It features a 150 mL mixing chamber, a digital RPM controller (200–1,200 RPM), and a heated base (40–80°C) for temperature-sensitive resins. The unit is commonly used in conjunction with Comet Series 200 Mixing Stations (manufactured between 2012–2018) and LabTech 3000 Series Resin Tanks.

However, it is not compatible with the newer LabTech 4000 Series due to a different mounting bracket (Part #LT4000-MB1). Attempting to force compatibility can lead to misalignment and resin contamination, which may cost $300–$500 in cleanup and recalibration.

Verify with the seller that the unit includes the original mixing paddle (Part #C-150P) and that the heating element resistance is within 10 ohms of factory spec. These are critical for consistent performance and long-term reliability.


What to Check Before Buying a Used Comet Series 150 Resin Blender in 2026

  1. Production Year: Units made between 2014–2017 tend to have more durable motor housings. Units older than 2013 may have a higher risk of motor failure.

  2. Motor RPM Accuracy: Use a tachometer to verify that the motor maintains ±5 RPM accuracy at 1,000 RPM. Deviations beyond this can lead to inconsistent resin viscosity, costing $200–$400 in rework.

  3. Heating Element Test: Apply a thermal imager to the base and confirm that it reaches 80°C within 10 minutes. A slow or inconsistent heater can lead to batch failures and material waste.

  4. Seal Integrity: Inspect the chamber gasket (Part #C-150G) for cracks or deformation. A compromised seal can lead to leakage and cross-contamination, which may cost $150–$300 per incident.

  5. Reject If: The unit has a motor with more than 12,000 cycles. Beyond this threshold, motor failure is likely within 6–12 months, leading to $800–$1,200 in unplanned downtime and repair costs.


FAQ

Q: Can I use the Comet Series 150 with a LabTech 4000 Series Resin Tank?
A: No. The LabTech 4000 Series (Part #LT4000-MB1) uses a different mounting bracket than the Comet Series 150. Attempting to use them together can cause misalignment and resin contamination, which may cost $300–$500 in cleanup.

Q: Should I buy a Comet Series 150 if I only need it for 1–2 years?
A: Yes, but only if the unit has less than 8,000 mixing cycles. Units with more than 10,000 cycles may fail within 6 months, leading to $800–$1,200 in unplanned costs.

Q: How long does a Comet Series 150 last with regular use?
A: With proper maintenance, it can last 5–7 years. The motor and gasket are the most common failure points. Replacing the gasket every 2–3 years can prevent $150–$300 in cleanup costs from leaks.

Q: How does the used price compare to a new Comet Series 150?
A: A used unit costs $3,950, while a new one starts at $9,900. This is a 50% savings, but new units come with 2-year warranties and zero downtime risk.

Q: What’s the most common issue with used Comet Series 150 units?
A: The most common issue is worn gaskets. A compromised seal can lead to leakage and cross-contamination, costing $150–$300 per incident. Always check the gasket condition before purchase.

Related Parts

Quick Info

ConditionConfirm in quote
CategoryNone

Get a Quote

Market: $4K (one observed listing)

Request pricing, availability and any applicable export requirements.

Email parts@caladansemi.com

Or call us during business hours

Secondary Market

Place a Bid or Ask

Submit your buying or selling requirements for Lab Equipment — Used Comet Series 150 Resin Blender (Comet).

Want to Buy
Want to Sell

Confirm export requirements and payment terms before any transaction · parts@caladansemi.com