Dell Dell 0Wkcfr Poweredge M1000E 1040Gbe Switch — High-Performance Networking for Data Centers (Dell)

How Much Does Dell 0WKCFR PowerEdge M1000E 10/40GBE Switch Cost in 2026?

As of July 2026, the Dell 0WKCFR PowerEdge M1000E 10/40GBE Switch is available in the used and refurbished market at a consistent price point of $312. This price is typically for units in condition grade B, sourced from secondary vendors like Axus Technology and Covalent Materials. For higher-grade units (A or A-), you can expect to pay up to $350–$375, depending on the vendor and the unit’s operational history.

New units, if still available, typically retail for $700–$800, meaning buyers can save 40–60% by opting for a used or refurbished model. However, it’s important to note that a faulty or misconfigured switch can lead to extended downtime—commonly 2–4 hours per incident—costing an average data center $1,200–$1,800 in lost productivity and emergency labor.

When purchasing, always verify the unit’s condition and test logs with the seller. A unit with more than 10,000 operational hours or signs of overheating may be more prone to failure, increasing the risk of unplanned downtime.

Dell 0WKCFR PowerEdge M1000E 10/40GBE Switch Specifications and Compatible Tools

The Dell 0WKCFR PowerEdge M1000E 10/40GBE Switch is a 1U modular switch designed for high-density 10/40GbE connectivity in data center environments. It typically supports up to 32 ports and offers Layer 2/3 switching capabilities. The switch is commonly used in virtualized environments and is often found in Dell PowerEdge chassis systems.

This switch was in production from 2013 to 2018 and is typically rated for around 10,000 operational hours before requiring maintenance or replacement. It is compatible with Dell PowerEdge M1000E chassis and commonly used with Dell PowerConnect 8024F switches for uplink connectivity.

Incompatibility can occur with newer Dell switches like the Dell S6000 series, which use different backplane interfaces. A mismatch can lead to failed deployment or system instability, potentially causing $2,000–$5,000 in rework and labor costs. Always verify compatibility with your existing infrastructure before purchase.

What to Check Before Buying a Used Dell 0WKCFR PowerEdge M1000E 10/40GBE Switch in 2026

1. Verify Operational Hours: Units with more than 10,000 operational hours are at higher risk of failure. A switch that has exceeded this threshold should be rejected unless it has been recently serviced.

2. Check for Physical Damage: Look for signs of overheating, such as discoloration on the PCB or warped components. A damaged heat sink can lead to thermal shutdowns, which may cost $1,500–$2,500 in emergency cooling and repairs.

3. Run Diagnostic Tests: Use Dell OpenManage Network Manager or a third-party tool like iPerf to test throughput and latency. A unit that fails to maintain 40GbE throughput under load is not suitable for high-performance environments.

4. Confirm Firmware Version: The switch should be running firmware version 1.4.0 or later to support modern virtualization protocols. Older versions may not be compatible with newer hypervisors, leading to deployment delays and additional configuration costs.

5. Reject if Production Year is Pre-2014: Units manufactured before 2014 are more likely to have outdated components and are not recommended for mission-critical environments. A failed switch in such a setup can lead to $3,000–$6,000 in downtime and replacement costs.

FAQ

Q: Can I use the Dell 0WKCFR PowerEdge M1000E 10/40GBE Switch with a Dell S6000 series switch?

A: No. The 0WKCFR is not compatible with the S6000 series due to differences in backplane and interface design. Attempting to use them together can lead to failed deployment and $2,000–$5,000 in rework costs.

Q: Should I buy a used Dell 0WKCFR if it has 12,000 operational hours?

A: No. Units with more than 10,000 operational hours are at significantly higher risk of failure. A unit with 12,000 hours may cost $1,500–$2,500 in emergency repairs or replacement if it fails.

Q: How long can I expect a used Dell 0WKCFR to last in a data center?

A: With proper maintenance, a used unit in condition grade B can last 2–3 years in a data center. Beyond that, failure rates increase, and the cost of unplanned downtime can exceed $3,000 per incident.

Q: What’s the difference between a Dell 0WKCFR and a Dell 0WKCGX?

A: The 0WKCGX is a 10/40GbE switch with a different backplane and power supply configuration. It is not interchangeable with the 0WKCFR and is typically used in different chassis models. Mixing the two can lead to $2,000–$4,000 in configuration and repair costs.

Q: What’s the average savings when buying a used Dell 0WKCFR instead of new?

A: On average, buyers save 40–60% by purchasing a used or refurbished unit. For example, a $750 new unit can be replaced with a $312 used one, saving $438 per unit.