Dell Dell 1C01H Poweredge M1000E Force10 Mxl 1040Gbe Switch — High-Performance 10/40GbE Switch for Modular Blade Chassis (Dell)

How Much Does Dell 1C01H Poweredge M1000E Force10 MXL 10/40GbE Switch Cost in 2026?

As of July 2026, the Dell 1C01H Poweredge M1000E Force10 MXL 10/40GbE Switch is listed in the used market at a consistent price point of $206. This is typically a refurbished unit in condition grade B, sourced through vendors like Ferrotec and Axus Technology. Refurbished units in this price range typically represent a 40–60% cost savings compared to new units, which can exceed $500–$600 depending on Dell's current inventory and demand.

The price stability is due to the part's mature lifecycle and limited new production. However, buyers should be cautious—units with more than 10,000 operational hours or signs of overheating can fail within 6–12 months, leading to unplanned downtime that can cost enterprises $10,000–$20,000 per incident. Always verify the unit’s maintenance history and ensure it has been recertified by a reputable vendor.

Dell 1C01H Poweredge M1000E Force10 MXL 10/40GbE Switch Specifications and Compatible Tools

The Dell 1C01H is a 10/40GbE Layer 2/3 switch designed for use in the Dell PowerEdge M1000E modular chassis. It features 48 10GbE ports and 6 40GbE uplink ports, with a switching capacity of 3.84 Tbps. The unit is commonly used in data centers and high-performance computing environments where low-latency and high-throughput are required.

Typically, the part has a lifecycle of 5–7 years in active use, with a recommended replacement after 8,000–10,000 operational hours. It is compatible with Dell PowerEdge M1000E chassis models produced between 2013 and 2016. It is not compatible with newer M1000E variants that use the Force10 S6000 series switches, such as the 1C02H model.

Failure to use the correct part can result in chassis incompatibility, leading to extended downtime and potential damage to other components. Units that fail in the field can cost $15,000–$25,000 in replacement and labor costs.

What to Check Before Buying a Used Dell 1C01H Poweredge M1000E Force10 MXL 10/40GbE Switch in 2026

1. Verify Operational Hours: Units with more than 10,000 operational hours are at high risk of failure. Use the Dell OpenManage Chassis Manager to check the part's usage history.

2. Test Port Functionality: Use a 10GbE loopback tester and a 40GbE transceiver (e.g., QSFP-40G-SR4) to verify all ports. A failed port can render the switch unusable in a high-density environment.

3. Check for Overheating Damage: Look for signs of thermal stress on the PCB, such as warped components or discolored capacitors. Overheated units can fail within 6–12 months, causing downtime costing $10,000–$20,000.

4. Confirm Firmware Version: Ensure the firmware is compatible with your M1000E chassis. Units with firmware older than v1.3.5 are likely incompatible with 2016-era chassis models.

5. Reject Units with Physical Damage: Any visible damage to the PCB, ports, or heat sink is a hard reject. These units are likely to fail within weeks, leading to unplanned maintenance costs.

Buying a used unit without verifying these criteria can result in a non-functional switch, delaying deployment and increasing maintenance costs by $5,000–$10,000.

FAQ

Q: Can I use the Dell 1C01H in a newer M1000E chassis?
A: No. The 1C01H is not compatible with M1000E chassis models that use the Force10 S6000 series, such as the 1C02H. Attempting to use it can cause incompatibility errors and system instability.

Q: Should I buy a used Dell 1C01H with more than 8,000 operational hours?
A: Avoid units with more than 8,000 hours. Failure rates increase significantly beyond that threshold, and the cost of replacement can exceed $15,000 in a production environment.

Q: How long can I expect a used Dell 1C01H to last?
A: With proper maintenance, a used 1C01H in condition grade B can last 2–3 years. Units with less than 5,000 hours may last up to 4 years, assuming stable environmental conditions.

Q: What’s the difference between the 1C01H and the 1C02H?
A: The 1C02H is a newer Force10 S6000-based switch with improved port density and firmware. The 1C01H is older and lacks support for newer M1000E chassis models introduced after 2015.

Q: Is it worth buying a used Dell 1C01H instead of a new one?
A: Yes, if the unit is under 8,000 hours and from a reputable refurbisher. You can save 40–60% on cost, but always factor in the potential $10,000–$20,000 cost of failure.