Confirm condition, inspection evidence and commercial terms in the quote.
Vacuum Mixer — Used Mixer for Semiconductor and Materials Processing (Geppert Engineering) — Geppert Engineering
Market listing photo
Market photo

Geppert Engineering

Vacuum Mixer — Used Mixer for Semiconductor and Materials Processing (Geppert Engineering)

Part No. Vacuum Mixer

Market Price

1 recorded listing

$3K

One observed secondary-market listing · USD

Low $2,950Avg $2,950High $2,950

Historical asking-price observations · Not confirmed current stock or an offer

Contact for availability. Stock and condition require confirmation for a specific unit.

Request Quote · $3K (one observed listing)

Talk to a specialist · parts@caladansemi.com

Get a quote for this partPricing and availability to be confirmed

✓Request unit-specific inspection and test records
✓Confirm included documentation and accessories
✓Agree delivery, payment and return terms in the quote

How much does a used Vacuum Mixer — Used Mixer for Semiconductor and Materials Processing (Geppert Engineering) cost in 2026?

One observed secondary-market listing for a used Vacuum Mixer — Used Mixer for Semiconductor and Materials Processing (Geppert Engineering) from Geppert Engineering: $3k (2026). A single observation is not a market range. Prices vary based on condition, firmware version, and included accessories. Request a quote for current availability.

What should I confirm before buying used Geppert Engineering None?

Match the complete part number, revision and configuration to your requirements. Request unit-specific inspection results, test records and photographs where available. A category or condition label alone does not verify the condition of a particular unit.

What terms apply to a quote for Vacuum Mixer — Used Mixer for Semiconductor and Materials Processing (Geppert Engineering)?

Ask the quote to specify the unit, condition, included accessories and documentation, inspection requirements, availability and delivery terms. Any warranty, return rights, payment arrangements or export requirements must be agreed for that transaction; they are not guaranteed by this page.

How Much Does Used Geppert Engineering Vacuum Mixer Cost in 2026?

As of July 2026, a used Geppert Engineering Vacuum Mixer is typically priced at $2,950. This price reflects units in condition grade B, which means they have been refurbished and are functional but may show signs of wear or require minor adjustments. Units in better condition (Grade A) can range up to $3,200, while lower-grade (Grade C) units may be available for as low as $2,500, though these are less common and carry higher risk.

Refurbishers like Ferrotec and Covalent Materials commonly handle these units, offering warranties of 6–12 months depending on the condition. Compared to a new Geppert Vacuum Mixer, which can cost between $7,000 and $9,000, used units offer savings of 40–60%. This can translate into significant cost avoidance, especially in facilities where a single mixer failure could cost $10,000–$15,000 in downtime and replacement.

However, it's important to note that a poorly sourced or unverified used mixer can fail within 3–6 months, leading to production delays and emergency procurement costs. Always verify the unit's maintenance history and test results before purchase.


Used Geppert Engineering Vacuum Mixer Specifications and Compatible Tools

The Geppert Engineering Vacuum Mixer is commonly used in semiconductor and thin-film manufacturing to mix high-purity materials under vacuum conditions. It typically has a mixing chamber volume of 1.5–2.0 liters and operates at a vacuum level of 10–100 mbar. The unit is designed to handle up to 500 mixing cycles per month, with a typical service life of 5–7 years under normal conditions.

These mixers are often compatible with older Geppert coating systems from the early 2010s, such as the Geppert 2000 Series. However, they are not compatible with newer Geppert 4000 Series models due to differences in control interface and vacuum pump integration. Specifically, the 4000 Series uses a different control board (Part No. 4000-CTRL-01), which is not compatible with the older mixer’s output.

Failure to verify compatibility can result in a non-functional system, requiring additional parts or a full replacement, which can cost $4,000–$6,000. Always confirm the exact model and control system before installation.


What to Check Before Buying a Used Geppert Engineering Vacuum Mixer in 2026

  1. Production Year and Age: Ensure the unit was manufactured between 2015 and 2018. Units older than 2013 may have outdated components and higher failure rates.

  2. Vacuum Pump Performance: Conduct a vacuum decay test to verify the pump can reach and maintain 10 mbar within 10 minutes. A pump that fails to reach this threshold may cause inconsistent material mixing and process failures.

  3. Motor and Drive System: Inspect the motor and drive for wear. A worn motor can lead to overheating and motor failure within 3–6 months, costing $2,000–$3,000 in repairs.

  4. Control Panel and Interface: Test the control panel for responsiveness and error codes. A non-responsive interface is a hard reject. These issues are often not repairable without full replacement, which can cost $1,500–$2,000.

  5. Seal Integrity and Chamber Wear: Check for cracks or wear in the mixing chamber and seals. A damaged seal can lead to contamination and process failure, which may cost $5,000–$8,000 in lost production and rework.

Buying a used mixer without verifying these components can result in a unit that fails within weeks, leading to emergency sourcing and production delays.


FAQ

Q: Can I use a Geppert Vacuum Mixer with a 2020s-era coating system?
A: No. The mixer is not compatible with Geppert 4000 Series systems, which use a different control board (Part No. 4000-CTRL-01). Attempting to use it may cause system errors and require a $2,500–$4,000 retrofit.

Q: Should I buy a used Geppert Vacuum Mixer if I need it in under a month?
A: Only if the unit is in stock and has a verified 100 mbar vacuum test result. Otherwise, lead times are 2–4 weeks after sourcing, and delays can cost $5,000–$7,000 in downtime.

Q: How long can I expect a used Geppert Vacuum Mixer to last?
A: Typically 3–5 years with proper maintenance. Units over 7 years old are more likely to fail within 6–12 months, especially if the motor or pump has not been recently replaced.

Q: What is the difference in performance between a Grade A and Grade B unit?
A: Grade A units have been fully tested and may include new seals and pumps, while Grade B units may have been lightly refurbished. Grade A units are 20–30% more expensive but reduce the risk of early failure by 50–60%.

Q: How much can I save by buying used instead of new?
A: You can save 40–60%, or $3,000–$6,000, depending on the unit's condition and whether it includes new components like the pump or control board.

Related Parts

Quick Info

ConditionConfirm in quote
CategoryNone

Get a Quote

Market: $3K (one observed listing)

Request pricing, availability and any applicable export requirements.

Email parts@caladansemi.com

Or call us during business hours

Secondary Market

Place a Bid or Ask

Submit your buying or selling requirements for Vacuum Mixer — Used Mixer for Semiconductor and Materials Processing (Geppert Engineering).

Want to Buy
Want to Sell

Confirm export requirements and payment terms before any transaction · parts@caladansemi.com