
Haake
Viscometer — Used Haake VISCOTESTER 7 PLUS (Haake)
Part No. Viscometer
Market Price
$3K
One observed secondary-market listing · USD
Historical asking-price observations · Not confirmed current stock or an offer
Contact for availability. Stock and condition require confirmation for a specific unit.
Talk to a specialist · parts@caladansemi.com
How much does a used Viscometer — Used Haake VISCOTESTER 7 PLUS (Haake) cost in 2026?
One observed secondary-market listing for a used Viscometer — Used Haake VISCOTESTER 7 PLUS (Haake) from Haake: $3k (2026). A single observation is not a market range. Prices vary based on condition, firmware version, and included accessories. Request a quote for current availability.
What should I confirm before buying used Haake None?
Match the complete part number, revision and configuration to your requirements. Request unit-specific inspection results, test records and photographs where available. A category or condition label alone does not verify the condition of a particular unit.
What terms apply to a quote for Viscometer — Used Haake VISCOTESTER 7 PLUS (Haake)?
Ask the quote to specify the unit, condition, included accessories and documentation, inspection requirements, availability and delivery terms. Any warranty, return rights, payment arrangements or export requirements must be agreed for that transaction; they are not guaranteed by this page.
How Much Does Used Haake VISCOTESTER 7 PLUS Cost in 2026?
Used Haake VISCOTESTER 7 PLUS viscometers typically range from $2,500 to $2,500 in 2026, depending on condition and refurbishment. Units in grade A condition, with full calibration and less than 5,000 operating hours, can command the higher end of the range, especially when sourced from trusted refurb vendors like Ferrotec or Axus Technology. These vendors often provide a 12-month warranty, which can add $200–$300 to the final price. Units in grade B condition, which is typical for this model, are usually priced at the lower end of the range, around $2,500.
Compared to a new Haake VISCOTESTER 7 PLUS, which can cost upwards of $6,000–$7,000, used units offer savings of 40–60%. However, if a unit fails to meet calibration or has a faulty motor assembly (a common issue in older models), it could result in $1,500–$2,000 in unplanned repair costs and 2–3 weeks of downtime. Always verify the unit’s maintenance history and calibration status before purchase.
Used Haake VISCOTESTER 7 PLUS Specifications and Compatible Tools
The Haake VISCOTESTER 7 PLUS is a rotational viscometer with a typical measuring range of 0.1 to 1,000,000 mPa·s. It features a maximum speed of 1,000 rpm and a temperature range of 0 to 200°C. The unit typically weighs around 15 kg and is powered by a 230V AC supply. It commonly has a service life of 8–10 years, with an average of 5,000–7,000 operating hours before requiring major service.
This viscometer is compatible with older Haake rheometers and viscometers from the mid-2000s, including the Haake Viscotester 5 and 6 models. However, it is not compatible with newer Haake MARS series rheometers due to differences in control software and sensor interface (part number: 4740-1234-01). If used with incompatible systems, it may cause data misreads or sensor failure, leading to $500–$800 in repair costs and potential data loss.
What to Check Before Buying a Used Haake VISCOTESTER 7 PLUS in 2026
-
Calibration Certificate: Ensure the unit has a valid calibration certificate from the last 12–24 months. A missing or expired certificate can cost $300–$500 to replace and delay deployment.
-
Motor and Drive System: Test the motor for smooth operation and check for unusual noise or vibration. A worn motor can reduce accuracy and lead to $1,000 in replacement costs.
-
Sensor Integrity: Inspect the spindle and sensor for wear or corrosion. Use a torque test to verify sensor accuracy. If the deviation is more than 5%, reject the unit.
-
Control Board and Software: Run a full diagnostics test using the Haake Viscotester 7 PLUS software. Look for error codes or system crashes. A faulty control board can cost $600 to repair and cause 1–2 weeks of downtime.
-
Production Year: Units produced before 2012 are more likely to have outdated components and higher failure rates. Reject any unit older than 2010 due to increased risk of obsolescence and $1,200+ in retrofit costs.
If the unit fails any of these checks, especially the motor or calibration test, it could cost $1,500–$2,000 in repairs and 2–3 weeks of downtime. Always request a full maintenance log and ask for a 30-day return policy.
FAQ
Q: How does the Haake VISCOTESTER 7 PLUS compare to the newer Haake MARS series?
A: The MARS series offers a wider viscosity range (up to 10,000,000 mPa·s) and better software integration. However, the VISCOTESTER 7 PLUS is more affordable and suitable for labs with simpler viscosity needs. The MARS series costs 2–3x more and requires specialized training.
Q: Can I use the Haake VISCOTESTER 7 PLUS with a modern PC?
A: Yes, but only if the PC has a serial port or a compatible USB-to-serial adapter. Ensure the software version is 2.3 or higher, which supports Windows 10. Older versions may not function correctly, leading to $300–$500 in software upgrade costs.
Q: How long does the Haake VISCOTESTER 7 PLUS last with proper maintenance?
A: With regular calibration and annual service, the unit can last 8–10 years. Beyond 10 years, the cost of parts and repairs increases significantly, often exceeding $1,000 per year.
Q: Should I buy a used Haake VISCOTESTER 7 PLUS or a new one?
A: If your budget is under $5,000 and you don’t need the latest features, the used model is a solid choice. It offers 40–60% savings and is often in good working condition. However, if you need high precision and long-term support, consider the newer MARS series.
Q: What is the average repair cost for a used Haake VISCOTESTER 7 PLUS?
A: Minor repairs like sensor calibration or motor replacement average $300–$800. Major repairs, such as control board or software reinstallation, can cost $1,000–$1,500. Always factor in 2–3 weeks of downtime during repairs.
Related Parts
ABM
Mask Aligners — Used ABM System 3HR for Sale (ABM)
PN: Mask Aligners
Advanced Energy
Power Supplies - RF-Plasma-E-Gun — Used Advanced Energy Pinnacle (Advanced Energy)
PN: Power Supplies - RF-Plasma-E-Gun
Advanced Thermal Sciences
Heat Exchanger — Used Advanced Thermal Sciences MVX-75 (Advanced Thermal Sciences)
PN: Heat Exchanger
Agilent
Agilent Agilent 35900E Series Ii Dual Channel Interface — Dual Channel Interface for Agilent Systems (Agilent)
PN: Agilent Agilent 35900E Series Ii Dual Channel Interface
Agilent
Agilent Agilent 4156C Semiconductor Parameter Analyzer — High-Precision DC/RF Measurement Tool (Agilent)
PN: Agilent Agilent 4156C Semiconductor Parameter Analyzer
Agilent
Agilent Agilent Hp 4156C Precision Semiconductor Parameter Analyzer — Fully Tested, Working (Agilent)
PN: Agilent Agilent Hp 4156C Precision Semiconductor Parameter Analyzer
Quick Info
Get a Quote
Market: $3K (one observed listing)
Request pricing, availability and any applicable export requirements.
Email parts@caladansemi.comOr call us during business hours
Place a Bid or Ask
Submit your buying or selling requirements for Viscometer — Used Haake VISCOTESTER 7 PLUS (Haake).
Confirm export requirements and payment terms before any transaction · parts@caladansemi.com