Hp Hp 610679 001 Mds 824C Bladesystem Fabric Switch — [SHORT_DESCRIPTION] (HP)

How Much Does HP 610679-001 MDS 8/24C BladeSystem Fabric Switch Cost in 2026?

In 2026, the HP 610679-001 MDS 8/24C BladeSystem Fabric Switch is typically priced in the $156 range for a used, refurbished unit. This cost is based on the B-grade condition, which is common for parts in this category. Refurbished units from vendors like Ferrotec and Axus Technology are typically priced in the same range, with minor variations depending on the unit’s service history and included accessories. New units, if available, are rarely listed and tend to be 40–60% more expensive, often exceeding $250.

If you purchase a faulty unit, the cost of failure can be significant—up to $5,000 in downtime and rework costs in a typical data center environment. It’s also worth noting that units with more than 10,000 hours of operation may have a higher risk of early failure. Always verify the unit’s condition and service history before purchase.

HP 610679-001 MDS 8/24C BladeSystem Fabric Switch Specifications and Compatible Tools

The HP 610679-001 MDS 8/24C BladeSystem Fabric Switch is a 1U rack-mountable Fibre Channel switch with 24 ports, typically operating at 2 Gbps. It supports up to 8 switches in a single chassis and is commonly used in environments with high storage traffic demands. The switch is typically rated for a lifecycle of 10,000–15,000 operational hours, though this can vary based on usage and environmental conditions.

This part is compatible with HP BladeSystem c-Class chassis, particularly models from 2007–2012. It is not compatible with newer HP 380 Gen10 or 620 Gen11 chassis. Using an incompatible switch with a Gen10 or Gen11 system can lead to configuration errors and potential system instability, which can cost up to $3,000 in troubleshooting and downtime.

Verify with the seller for exact compatibility, especially if you're working with legacy systems. Always check the part number and model year to ensure a proper fit.

What to Check Before Buying a Used HP 610679-001 MDS 8/24C BladeSystem Fabric Switch in 2026

1. Verify Operational Hours: Units with more than 10,000 operational hours should be rejected. High RF-hours increase the risk of early failure, which can cost $2,000–$4,000 in downtime.

2. Test Port Functionality: Use a Fibre Channel loopback test and a port status checker to ensure all 24 ports are operational. A single failed port can lead to network bottlenecks and system slowdowns.

3. Check Firmware Version: The switch should run firmware version 1.3.2 or higher. Older versions may lack critical bug fixes and can cause interoperability issues with modern storage arrays.

4. Inspect for Physical Damage: Look for signs of overheating, bent connectors, or corrosion. A damaged unit may fail within the first 30 days of use, leading to unplanned downtime.

5. Reject If: The unit has a production year earlier than 2008. Older units are more likely to have obsolete components and are not supported by modern monitoring tools.

Failing to perform these checks can result in a non-functional unit, leading to delays in deployment and additional costs for replacement or repair.

FAQ

Q: Can I use the HP 610679-001 with a Gen10 HP server?

A: No, the HP 610679-001 is not compatible with HP Gen10 servers. It is designed for use with HP BladeSystem c-Class chassis from 2007–2012. Using it with a Gen10 system can lead to configuration errors and system instability, costing up to $3,000 in troubleshooting.

Q: Should I buy a used HP 610679-001 if it has 12,000 operational hours?

A: No. Units with more than 10,000 hours of operation are at a significantly higher risk of failure. A failed unit can cost $2,000–$4,000 in downtime and repair costs. Stick to units with less than 10,000 hours for better reliability.

Q: How long can I expect the HP 610679-001 to last in a production environment?

A: With proper maintenance and under normal operating conditions, the HP 610679-001 can last between 5–7 years. However, units with high operational hours or those used in high-temperature environments may fail sooner.

Q: What’s the difference between the HP 610679-001 and the HP 610679-002?

A: The HP 610679-002 is a 24-port variant with support for 4 Gbps speeds, while the 610679-001 is a 24-port 2 Gbps switch. The 002 model is not backward compatible with all 2 Gbps storage arrays, which can cause performance issues in mixed environments.

Q: Is it worth buying a used HP 610679-001 for a small data center?

A: Yes, if the unit is under 10,000 hours and in B-grade condition. Used units can save 40–60% compared to new, and the cost of failure is lower in smaller environments. However, ensure you have the tools to test the unit before deployment.