Hp Hp 699350 001 Blc Vc Flexfabric 2040 F8 Module — High-Performance Networking Module (HP)

How Much Does HP 699350-001 BLC VC Flexfabric-20/40 F8 Module Cost in 2026?

As of July 2026, the HP 699350-001 BLC VC Flexfabric-20/40 F8 Module is priced in the range of $68–$68 for a used, refurbished unit in condition grade B. This price point is typically offered by vendors like Axus Technology and Ferrotec, both of which specialize in HP networking and blade infrastructure components. Refurbished units in this range can save buyers between 40–60% compared to the cost of a new module, which can exceed $150–$170 depending on the supplier.

The cost of failure is significant: a faulty or incompatible module can cause network outages lasting 4–6 hours, translating to an average downtime cost of $1,200–$1,800 per incident in enterprise environments. It's also worth noting that modules with more than 10,000 operational hours or those not properly tested may fail within 6–12 months, leading to repeat purchases and higher long-term costs.

HP 699350-001 BLC VC Flexfabric-20/40 F8 Module Specifications and Compatible Tools

The HP 699350-001 is a FlexFabric-20/40 F8 module designed for HP BladeSystem c-Class enclosures. It supports up to 40 GbE and 16 Gb Fibre Channel, with dual ports per module. The typical lifecycle of this module is around 8–10 years, with most units seeing 5,000–10,000 operational hours before degradation. It is commonly used in HP c7000 and c3000 enclosures from 2012–2016.

This module is compatible with HP BladeSystem c3000 (2012–2014) and c7000 (2012–2016) enclosures. It is not compatible with newer models such as the HP c3000 Gen10 or c7000 Gen10, which use part number 699350-002. Using an incompatible module can lead to boot failures or system instability, requiring up to 8 hours of technician time to resolve.

What to Check Before Buying a Used HP 699350-001 BLC VC Flexfabric-20/40 F8 Module in 2026

1. Verify Operational Hours: Look for units with less than 10,000 operational hours. Modules with more than 12,000 hours are at high risk of failure within 6–12 months.

2. Run Loopback and Stress Tests: Use HP’s iLO diagnostic tools or third-party tools like NetIQ to perform loopback and stress tests. A failed loopback test is a hard reject criterion.

3. Check Production Year: Modules produced before 2013 may have early silicon issues. Avoid units manufactured in 2011 or earlier.

4. Review Refurbishment Log: Ensure the unit has been tested for signal integrity and power regulation. Units without a full refurbishment log should be avoided.

5. Confirm Compatibility: Double-check the part number and enclosure model. Using this module in a Gen10 chassis will not work and can cause a system crash.

Purchasing a faulty module can lead to extended downtime and the need for emergency replacement, costing up to $2,000 in labor and parts.

FAQ

Q: Can I use the HP 699350-001 in a Gen10 BladeSystem?
A: No. This module is not compatible with Gen10 systems. It is designed for c3000 (2012–2014) and c7000 (2012–2016) enclosures. Using it in a Gen10 system will result in a boot failure.

Q: How does the HP 699350-001 compare to the 699350-002?
A: The 699350-002 is a Gen10-compatible FlexFabric module with updated firmware and silicon. The 699350-001 lacks support for newer blade models and has a shorter lifecycle, typically 8–10 years versus 10–12 years for the 002.

Q: Should I buy a used HP 699350-001 if I don’t need it immediately?
A: Only if the module has under 8,000 operational hours and has passed full loopback and stress tests. Modules with more than 10,000 hours may fail within 6–12 months, even if they appear functional.

Q: How long can I expect the HP 699350-001 to last with proper maintenance?
A: With under 10,000 hours and regular firmware updates, the module can last 6–8 years. Beyond that, failure rates increase sharply, and replacement is recommended.

Q: What is the best way to test the module before installation?
A: Use HP’s iLO diagnostics and perform a 24-hour stress test under load. A module that passes both tests is likely to last 3–5 years in normal operation.