Hp Hp 708065 001 Blc Vc Flexfabric 10Gb 24 Port Module — 24-Port 10Gb Switch Module for HP BladeSystem (HP)

How Much Does HP 708065-001 BLc VC FlexFabric 10GB 24 Port Module Cost in 2026?

As of July 2026, the HP 708065-001 BLc VC FlexFabric 10GB 24 Port Module is priced in the range of $31–$31 for a used, refurbished unit in condition grade B. This price is typically sourced from vendors like Axus Technology and Covalent Materials, which specialize in high-quality refurbished HP networking components. Compared to the original new price, which can exceed $75–$85, this represents a savings of 40–60%.

The cost of failure for a non-functional module in a BladeSystem environment can be severe—up to $1,500–$2,000 in downtime and repair labor. However, it's important to note that the condition grade B indicates the unit may have minor cosmetic wear and may not have passed full stress testing. Always verify with the seller that the unit has been tested in a real-world configuration, especially if it will be used in a mission-critical deployment.

HP 708065-001 BLc VC FlexFabric 10GB 24 Port Module Specifications and Compatible Tools

The HP 708065-001 is a 24-port 10Gb FlexFabric module designed for use in HP BladeSystem c-Class chassis, typically with the HP VC Flex-10/10D modules. It supports both 10Gb Ethernet and Fibre Channel over Ethernet (FCoE), making it a versatile option for converged network architectures. The module typically has a lifecycle of 5–7 years in active use, with some units still in operation from 2018–2020 production cycles.

It is commonly compatible with HP BladeSystem c7000 chassis and c3000 enclosures. However, it is not compatible with the newer HP Synergy 3820C or 3830C modules. Using an incompatible module can result in a failed boot or loss of interconnect, leading to a full chassis reboot and potential data loss. Always verify compatibility with the part number HP 708065-001 before installation.

What to Check Before Buying a Used HP 708065-001 BLc VC FlexFabric 10GB 24 Port Module in 2026

1. Production Year: Look for units produced between 2018 and 2020. Modules older than 2017 may have higher failure rates due to component aging.
2. Power-Up Test: Request a full power-on test with LED status verification. A module that fails to power up or shows no port activity is a hard reject.
3. Firmware Version: Ensure the firmware is at least version 2.10. Older versions may not support newer BladeSystem firmware updates.
4. Burn-In Test: Ask if the unit has undergone a 24-hour burn-in test under load. This is a strong indicator of reliability.
5. Physical Inspection: Check for bent connectors, corrosion, or signs of liquid damage. Any of these can lead to intermittent failures and up to $1,000 in unplanned repair costs.

Buying a defective module can lead to extended downtime and the need for emergency replacement, which can cost up to $2,500 in labor and parts.

FAQ

Q: Can I use the HP 708065-001 with HP Synergy 3820C?
A: No. The HP 708065-001 is not compatible with the HP Synergy 3820C. Attempting to use it may result in a failed boot and chassis lockout, costing up to $1,500 in downtime.

Q: Should I buy a used HP 708065-001 with firmware 1.9?
A: No. Firmware 1.9 is outdated and may not support BladeSystem firmware beyond 2022. Always request firmware 2.10 or higher to ensure compatibility.

Q: How long can I expect the HP 708065-001 to last in active use?
A: With proper maintenance and firmware updates, the module can last 5–7 years. Units older than 2017 may begin to show increased failure rates.

Q: What test methods should I ask about before purchasing?
A: Ask if the unit has passed a 24-hour burn-in test and a full power-on test with LED status verification. These are standard methods to verify functionality.

Q: Is it worth buying a used HP 708065-001 for a backup module?
A: Yes, if the unit is in condition grade B or better and has passed stress testing. A backup module can save up to $2,000 in emergency replacement costs.