Hp Hp 716102 001 6125Xlg Ethernet Blade Switch — High-Performance Networking for Blade Systems (HP)

How Much Does HP 716102-001 6125XLG Ethernet Blade Switch Cost in 2026?

In 2026, the HP 716102-001 6125XLG Ethernet Blade Switch is typically available in the used/refurbished market for around $126, depending on the condition and vendor. This price reflects a B-grade refurbished unit, which has been tested and cleared for basic functionality but may show signs of wear. If you're looking for a higher-grade option, such as a CMA-certified or field-replaced unit, expect to pay 10–15% more, typically around $140–$145.

Reputable vendors like Axus Technology and Covalent Materials often carry these switches, offering 40–60% savings compared to new units, which can cost upwards of $300. Choosing a used switch can save a facility $174–$175 per unit, which can add up quickly in large deployments. However, if the unit fails within the first 6–12 months, the cost of downtime and replacement can exceed $500 per incident, especially in mission-critical environments.

It’s also important to note that condition grading is not always consistent across vendors. Always request a detailed inspection report and ask for a return policy that covers at least 30 days of post-delivery testing.

HP 716102-001 6125XLG Ethernet Blade Switch Specifications and Compatible Tools

The HP 716102-001 6125XLG Ethernet Blade Switch is a 10/100/1000BASE-T switch designed for use in HP BladeSystem c-Class enclosures. It typically supports up to 24 ports and offers low-latency switching for blade server environments. The switch is commonly rated for 50,000 RF-hours of operational life and is typically used in systems from 2008 to 2012.

This switch is compatible with HP BladeSystem c3000 and c7000 enclosures, as well as with HP ProLiant BL460c and BL685c blades. However, it is not compatible with newer HP BladeSystem enclosures that use 10GbE or higher-speed interconnects. Using it in an incompatible system could result in network instability, requiring a full reconfiguration and potentially costing $300–$500 in labor and downtime.

Verify with the seller that the unit is from a 2008–2012 production batch and is not a 716102-002 or similar variant, which may have different port configurations.

What to Check Before Buying a Used HP 716102-001 6125XLG Ethernet Blade Switch in 2026

1. Verify the Production Year: Ensure the unit was manufactured between 2008 and 2012. Units older than 2007 may have exceeded their expected lifecycle and are more prone to failure.

2. Run a Port Test: Use a network tester like the Fluke Networks DSX-5000 to verify all 24 ports are operational. A failed port can lead to network outages and cost $200–$300 in lost productivity.

3. Check Firmware Version: The switch should have firmware version 1.0.1 or later. Older versions may not support modern blade server configurations and could cause incompatibility issues.

4. Inspect for Physical Damage: Look for bent pins, cracked PCBs, or corrosion. Any of these can lead to immediate failure upon installation, costing $150–$250 in rework and replacement.

5. Request a Burn-In Report: Ask the vendor if the unit was stress-tested for at least 24 hours. Units that haven’t been tested may fail within the first week, leading to $400–$600 in downtime and replacement costs.

Reject if: The unit shows signs of overheating, such as melted plastic or discolored components. These are strong indicators of prior failure and should be avoided.

FAQ

Q: Can I use the HP 716102-001 in a newer HP BladeSystem c7000 enclosure?
A: No. The 716102-001 is not compatible with c7000 enclosures that use 10GbE interconnects. Using it in such a system could cause network instability and cost $300–$500 in reconfiguration.

Q: Should I buy a used HP 716102-001 if I need it for a mission-critical application?
A: Only if the unit is CMA-certified and comes with a 90-day return policy. A B-grade unit without testing could fail within 6 months, leading to $500+ in downtime costs.

Q: How long can I expect a used HP 716102-001 to last?
A: With proper maintenance, a used unit from 2010–2012 can last 5–7 years. Beyond that, failure rates increase significantly, and replacement costs can exceed $300 per year in downtime.

Q: What’s the difference between the 716102-001 and 716102-002?
A: The 716102-002 is a later revision with a different port configuration. Using the wrong variant could result in a non-functional switch and cost $250–$400 in replacement and labor.

Q: Is it worth buying a used HP 716102-001 instead of a new one?
A: Yes, if you can verify the unit is in good condition and compatible. You can save 40–60% compared to new, which can amount to $175–$200 per unit.