Hp Hp Jc617 61101 10500 24P Gbe 2P 10 Gbe Xfp Se Module — High-Speed Networking Module for HP Systems (HP)

How Much Does HP JC617-61101 10500 24P GBE / 2P 10-GBE XFP SE Module Cost in 2026?

As of July 2026, the HP JC617-61101 10500 24P GBE / 2P 10-GBE XFP SE Module typically sells in the $250 range for a used, B-grade unit. Refurbished versions from vendors like Axus Technology and Ferrotec are priced similarly, with no significant variance between condition tiers due to the module’s age and limited availability of new units. New OEM replacements, if available, can cost between $600 and $800, meaning buyers can save 40–60% by opting for a used or refurbished unit.

The cost of failure is high: if this module fails in a production environment, it can cause $1,000–$2,500 in daily downtime for data centers or enterprise networks. A failed module can also lead to cascading failures in redundant systems, increasing repair costs. It's important to note that modules over 10 years old are more prone to signal degradation and should be tested thoroughly before deployment.

HP JC617-61101 10500 24P GBE / 2P 10-GBE XFP SE Module Specifications and Compatible Tools

The HP JC617-61101 10500 24P GBE / 2P 10-GBE XFP SE Module is a 10-Gigabit Ethernet XFP transceiver designed for use in HP 10500 series switches. It typically supports 24 ports of 1-Gigabit Ethernet and 2 ports of 10-Gigabit Ethernet, with a maximum data rate of 10.3125 Gbps. The module is commonly used in systems from 2012 to 2016, and while it has no official RF-hours or cycle count, its expected service life is typically 5–7 years under normal conditions.

This module is compatible with HP 10500-24P and 10500-48P switch models. It is not compatible with the HP JG617-61101 variant, which has a different internal design and may cause port lockouts or data corruption if used interchangeably. A failure in this module can result in $1,500–$3,000 in lost productivity per day in mission-critical environments.

What to Check Before Buying a Used HP JC617-61101 10500 24P GBE / 2P 10-GBE XFP SE Module in 2026

1. Verify the production year — Modules produced before 2014 are more likely to have signal integrity issues. Look for modules with a 2015 or later production date.
2. Check for physical damage — Look for bent pins, cracked housing, or corrosion on the XFP connector. A damaged module can cause $1,200–$2,000 in unnecessary rework.
3. **Request a BERT (Bit Error Rate Test) — This test should show <1 error in 10^12 bits. Anything higher indicates degradation.
4. **Perform a BERTScope or optical power test — Ensure output power is between -1.5 dBm and +2.5 dBm. Deviations can lead to $800–$1,500 in performance losses.
5. Reject if the module has been in storage for more than 5 years — Long-term storage can degrade capacitors and connectors. A bad unit can lead to $1,000–$2,000 in downtime.

FAQ

Q: Can I use the HP JC617-61101 in a 2020 HP 10500 switch?
A: No. The HP JC617-61101 is not compatible with HP 10500 switches produced after 2016. Newer models use JG617-61101, which has a different internal architecture. Using the wrong module can cause $1,500–$2,500 in system errors.

Q: Should I buy a used HP JC617-61101 module over 10 years old?
A: No. Modules over 10 years old are prone to signal degradation and capacitor failure. A failed module in a live system can cost $1,200–$2,000 in downtime per day. Stick to modules produced between 2014 and 2017.

Q: How long can I expect this module to last in a production environment?
A: With proper maintenance and a clean power supply, you can expect 5–7 years of reliable performance. Modules that exceed 7 years should be tested every 6 months. A failure after 7 years can cost $800–$1,500 in unplanned downtime.

Q: How does this module compare to the HP JG617-61101?
A: The JG617-61101 is a newer variant with improved power efficiency and better signal integrity. The JC617-61101 is older and lacks support for some 2018 and later firmware updates. Using the JC617-61101 in a newer system can result in $1,000–$1,800 in compatibility issues.

Q: What’s the best way to test a used HP JC617-61101 before deployment?
A: Use a BERTScope to test signal integrity and a multimeter to check power draw. The module should draw <1.2W under load. A failed test can lead to $1,000–$2,000 in system instability.