Hp Hp Jc617A 10500 24P Gbe 2P 10 Gbe Xfp Se Module — High-Performance Networking Module for HP Systems (HP)

How Much Does HP JC617A 10500 24P Gbe / 2P 10-Gbe XFP SE Module Cost in 2026?

As of July 2026, the HP JC617A 10500 24P Gbe / 2P 10-Gbe XFP SE Module is priced in the range of $250 for a used, Grade B unit. This price is consistent across most secondary markets and refurb vendors. Used units typically cost between $200 and $300, depending on condition and provenance. Refurbished units from trusted vendors like Ferrotec and Axus Technology often fall in the $250–$275 range, with a 40–60% cost savings compared to new units, which can exceed $600.

Purchasing a faulty or poorly refurbished module can lead to significant downtime. A failed module in a data center environment can cost upwards of $10,000 in lost productivity and emergency replacement costs. It's also worth noting that modules with more than 10,000 operational hours or those not tested for signal integrity should be approached with caution, as they may fail within 6–12 months of installation.

HP JC617A 10500 24P Gbe / 2P 10-Gbe XFP SE Module Specifications and Compatible Tools

The HP JC617A 10500 24P Gbe / 2P 10-Gbe XFP SE Module is a high-density, multi-rate optical transceiver module designed for use in HP ProLiant and BladeSystem servers. It supports 24 ports at 1 Gbps and 2 ports at 10 Gbps, making it ideal for environments requiring mixed-speed connectivity. The module typically operates at wavelengths of 850 nm and 1310 nm, with a power consumption of approximately 1.5 W.

Modules in this series are typically rated for 10,000–15,000 operational hours, though actual lifespan can vary based on environmental conditions and usage. They are commonly used in HP systems from 2010 to 2015, including the HP C7000 BladeSystem and HP DL380 G7. However, they are not compatible with newer HP Gen10 or Gen11 systems, which use different transceiver standards.

Using an incompatible module, such as the HP J9730A, can result in system errors and prevent the server from booting. In such cases, the cost of misconfiguration and downtime can exceed $5,000 due to troubleshooting and replacement delays.

What to Check Before Buying a Used HP JC617A 10500 24P Gbe / 2P 10-Gbe XFP SE Module in 2026

1. Verify the Production Year: Modules produced before 2012 may have a higher failure rate due to early design issues. Look for a production date stamp or ask the seller for documentation.

2. Signal Integrity Test: Use a fiber optic test set (e.g., JDSU or Anritsu) to verify that the module transmits and receives signals at both 1 Gbps and 10 Gbps without error. A failed test is a hard reject.

3. Power Consumption Check: Measure the module’s power draw during operation. It should not exceed 1.8 W. Higher consumption may indicate internal degradation or poor thermal management.

4. Firmware Compatibility: Confirm that the module’s firmware is compatible with your system. Some HP servers require firmware version 2.1 or higher to recognize the module.

5. Physical Inspection: Look for signs of overheating, such as discoloration near the transceiver or damaged connectors. Modules with more than 10,000 operational hours should be tested more thoroughly.

Purchasing a non-functional module can lead to extended downtime and the need for expedited shipping, which can add $1,500 or more to the total cost of replacement.

FAQ

Q: Can I use the HP JC617A 10500 24P Gbe / 2P 10-Gbe XFP SE Module in a Gen10 HP server?
A: No. The JC617A is not compatible with HP Gen10 or Gen11 systems, which use the HP J9730A or J9731A modules. Attempting to use it may prevent the system from booting and cost up to $5,000 in downtime.

Q: Should I buy a used HP JC617A module with over 10,000 operational hours?
A: It depends. Modules with over 10,000 hours may still function, but they are more likely to fail within 6–12 months. Always request a signal integrity test and power consumption check before purchase.

Q: How long can I expect a used HP JC617A module to last?
A: A well-maintained used module typically lasts 3–5 years in a controlled environment. Modules with more than 10,000 hours may fail within 1–2 years.

Q: What’s the difference between the HP JC617A and the HP J9730A?
A: The JC617A is a 24P + 2P module for older HP systems, while the J9730A is a 40G QSFP module for Gen10 and later. The J9730A supports higher speeds but is not backward compatible with JC617A systems.

Q: Can I use a non-HP brand module as a replacement?
A: Not recommended. HP systems are picky about transceiver compatibility. Using a third-party module may trigger error codes or prevent the system from recognizing the port, leading to $2,000–$4,000 in troubleshooting costs.