Hp Jc769A Nx Ips 6 Segment 10G Sfp Networking Module

How Much Does HP JC769A NX IPS 6-Segment 10G SFP+ Networking Module Cost in 2026?

As of July 2026, the HP JC769A NX IPS 6-Segment 10G SFP+ Networking Module is priced in the range of $126, with no variation by condition tier. This price is typically for a used or refurbished unit, and it reflects a 40–60% savings compared to the original manufacturer's price for a new module. Refurbishers like Ferrotec and Axus Technology are commonly listed as sources for this part, and both typically offer modules in condition grade B or better.

Purchasing a faulty or incompatible module can lead to significant downtime. A failed SFP+ module in a production environment can cost upwards of $1,500 in lost productivity and repair labor. It's also worth noting that while the price is stable, the condition of the module can vary. A B-grade unit may have minor wear or require a full diagnostic test before deployment. Always request a full test report from the seller before finalizing the purchase.

HP JC769A NX IPS 6-Segment 10G SFP+ Networking Module Specifications and Compatible Tools

The HP JC769A NX IPS 6-Segment 10G SFP+ Networking Module is a 10 Gigabit Ethernet transceiver module designed for use in HP networking switches. It supports SFP+ form factor and is typically used in environments requiring high-speed data transmission. Key specifications include a data rate of 10.3125 Gbps, a typical operating temperature range of 0°C to 70°C, and a power consumption of approximately 1.5W.

This module is commonly used in HP ProCurve switches, particularly models from the 5400 and 6200 series produced between 2012 and 2016. However, it is not compatible with the HP JG769A or JG770A modules, which use a different SFP+ variant. Failure to use the correct module can result in signal degradation or complete link failure, which can cause network outages and cost up to $2,000 in lost uptime.

What to Check Before Buying a Used HP JC769A NX IPS 6-Segment 10G SFP+ Networking Module in 2026

1. Verify Production Year: Ensure the module was produced between 2012 and 2016. Modules outside this range may not be compatible with your existing hardware.

2. Check for Physical Damage: Look for signs of physical wear, such as bent pins or cracked housing. Any visible damage can lead to signal loss and should be a hard reject.

3. Request Diagnostic Test Results: Ask the seller for a full diagnostic test, including signal integrity and power consumption. A module drawing more than 2.0W at idle is a red flag.

4. Confirm Compatibility: Cross-reference the part number with your switch model. The JC769A is not compatible with the JG769A or JG770A modules.

5. Review Seller Reputation: Choose sellers with a track record of selling HP networking modules. Ferrotec and Axus Technology are reliable options.

Failure to follow these steps can result in a non-functional module, which could cost up to $1,200 in downtime and replacement costs. Always insist on a return policy and a full test report before purchasing.

FAQ

Q: Can I use the HP JC769A module in a newer HP switch?
A: No. The JC769A is typically compatible only with HP switches produced between 2012 and 2016. Newer models may use different SFP+ variants and will not accept this module.

Q: Should I replace the HP JC769A module if it's over five years old?
A: Yes. Modules over five years old may experience signal degradation, especially if they've been used in high-temperature environments. A diagnostic test is recommended before deployment.

Q: How long can I expect the HP JC769A module to last in typical use?
A: With proper maintenance and in a controlled environment, the module can last between 6 to 8 years. Beyond that, signal integrity may decline, increasing the risk of failure.

Q: What’s the difference between the HP JC769A and the JG769A module?
A: The JG769A is a newer variant with updated firmware and a different pin configuration. The JC769A is not compatible with the JG769A, and using them interchangeably can cause signal loss and hardware damage.

Q: How much does it cost to replace a failed HP JC769A module in a production environment?
A: A failed module can cost between $1,000 and $2,000 in downtime and labor, depending on the criticality of the network. Always ensure you have a backup or spare module on hand.