Hp Hp Jd119 61201 X120 1G Sfp Lc Lx Transceiver — Gigabit Ethernet Transceiver for HP Switches (HP)

How Much Does HP JD119-61201 X120 1G SFP LC LX Transceiver Cost in 2026?

As of July 2026, the HP JD119-61201 X120 1G SFP LC LX Transceiver typically ranges between $121–$121 in the used and refurbished market. This price is for a Grade B unit, which is commonly sourced from decommissioned HP ProCurve switches. Refurbished units from vendors like Ferrotec and Axus Technology are typically within this range, offering 40–60% savings compared to a new unit, which can cost upwards of $300.

The cost of failure is significant—using a faulty transceiver can lead to network downtime, which can cost enterprises $1,000–$5,000 per hour, depending on the size and criticality of the network. It's also worth noting that transceivers with more than 10,000 hours of operational use may show signs of degradation, so always verify the condition with the seller.

HP JD119-61201 X120 1G SFP LC LX Transceiver Specifications and Compatible Tools

The HP JD119-61201 X120 1G SFP LC LX Transceiver is a 1Gbps fiber optic module designed for use with LC connectors and typically operates over single-mode fiber at a wavelength of 1310 nm. It supports distances up to 10 km and is commonly used in HP ProCurve switches from the 2008–2014 production cycle, including models like the HP 2620 and HP 2920.

This transceiver is not compatible with SFP+ ports or 10G systems. Specifically, it will not work with part numbers such as the HP JD119-61202, which is a 10G variant. Failure to use the correct transceiver can result in port incompatibility, which may require a full switch replacement or costly downtime to resolve.

What to Check Before Buying a Used HP JD119-61201 X120 1G SFP LC LX Transceiver in 2026

1. Verify the Production Year: Look for units manufactured between 2008 and 2014. Transceivers made before 2008 may have outdated firmware and are more prone to failure.

2. Check for Physical Damage: Inspect the LC connector for scratches or wear. A damaged connector can lead to signal loss and network instability.

3. Test with a Fiber Optic Power Meter: This will confirm the output power level, which should be between -10 dBm and 0 dBm. Units outside this range are likely to fail in the field.

4. Run a Loopback Test: This test checks for internal signal integrity. If the transceiver fails a loopback test, it should be rejected outright.

5. Review Seller Documentation: Ensure the seller provides a burn-in test report and a 90-day warranty. Units without this documentation should be avoided.

Purchasing a faulty transceiver can result in up to $3,000 in downtime costs and potential data loss, so due diligence is essential.

FAQ

Q: Can I use the HP JD119-61201 in a 10G switch?
A: No. The HP JD119-61201 is a 1G transceiver and will not work in 10G systems. Attempting to use it in a 10G switch can cause port incompatibility and require a full switch replacement.

Q: Should I buy a used HP JD119-61201 transceiver with more than 10,000 hours of use?
A: It's not recommended. Transceivers with more than 10,000 hours of operational use are more likely to fail, especially in high-traffic environments.

Q: What is the typical lifespan of an HP JD119-61201 transceiver?
A: These transceivers typically last 5–7 years in normal conditions. However, units used in high-temperature or high-humidity environments may degrade faster.

Q: How does the HP JD119-61201 compare to the HP JD119-61202?
A: The JD119-61201 is a 1G transceiver, while the JD119-61202 is a 10G variant. They are not interchangeable and are used in different switch models.

Q: What is the best way to test a used HP JD119-61201 before deployment?
A: Use a fiber optic power meter to check output levels and perform a loopback test. Both tests should be completed to ensure signal integrity and avoid costly failures.