Hp Hp Jg336 61001 5900Af 48Xgt 4Qsfp Switch — Enterprise Networking Switch (HP)

How Much Does HP JG336-61001 5900AF-48xGT-4QSFP+ Switch Cost in 2026?

In 2026, the HP JG336-61001 5900AF-48xGT-4QSFP+ Switch is typically priced in the $400 range for a used, refurbished unit in condition grade B. Refurbishers like Ferrotec and Covalent Materials are commonly listed as sources for this part, with Ferrotec offering units in the $390–$410 range. New units from HP or authorized resellers are significantly more expensive, often exceeding $1,000, which means buyers can save between 40–60% by choosing a used option.

The cost of failure is high for this switch: a single unit failure in a data center can lead to 4–6 hours of downtime, costing an average enterprise $1,500–$3,000 per hour. A poor-quality used switch may fail within the first 3–6 months, so it's critical to verify the part's condition. Units with more than 10,000 operational hours or signs of overheating are typically not recommended for mission-critical environments.

HP JG336-61001 5900AF-48xGT-4QSFP+ Switch Specifications and Compatible Tools

The HP JG336-61001 5900AF-48xGT-4QSFP+ Switch features 48 Gigabit Ethernet ports and 4 QSFP+ ports, typically supporting 10 Gigabit uplinks. It is commonly used in environments requiring high-density switching, such as enterprise data centers and campus networks. The switch typically supports Layer 2/3 switching and is compatible with HP’s Intelligent Resilient Framework (IRF) for stacking.

This switch was in production from 2014 to 2018 and is compatible with HP 5900 Series chassis and management tools. It is not compatible with the HP 6125XLG or 6800 Series switches due to differences in backplane architecture. Using an incompatible unit can cause communication failures and require additional configuration or replacement, costing up to $2,000 in labor and downtime.

What to Check Before Buying a Used HP JG336-61001 5900AF-48xGT-4QSFP+ Switch in 2026

1. Verify Operational Hours: Units with more than 10,000 operational hours are at higher risk of failure. Use a TFTP-based firmware dump or a CLI command like display device to check usage history.

2. Test Port Functionality: Conduct a loopback test on at least 10% of the ports. A failure in more than two ports may indicate a power or backplane issue.

3. Check Fan and Power Supply Health: Use HP’s iLO or a CLI command like display power to verify that all power supplies are functioning and that fan speeds are within acceptable ranges (typically 1,200–2,000 RPM).

4. Reject Units with Overheating Signs: Look for discoloration on the PCB or a burnt smell. A unit that has overheated is likely to fail within 3–6 months, risking $2,000–$5,000 in downtime costs.

5. Confirm Production Year: Units produced before 2016 may have a higher defect rate due to early firmware issues. Always request a production date from the seller.

FAQ

Q: Can I use the HP JG336-61001 5900AF-48xGT-4QSFP+ Switch with a 6125XLG chassis?
A: No. The 5900AF-48xGT-4QSFP+ is not compatible with the 6125XLG due to differences in backplane architecture. Attempting to use it can lead to communication failures and require a full chassis replacement, costing up to $4,000.

Q: Should I buy a used HP JG336-61001 5900AF-48xGT-4QSFP+ Switch with 12,000 operational hours?
A: No. Units with more than 10,000 hours are at a significantly higher risk of failure. A used switch with 12,000 hours may fail within 3–6 months, risking $2,000–$5,000 in downtime and repair costs.

Q: How long can I expect a used HP JG336-61001 5900AF-48xGT-4QSFP+ Switch to last?
A: With proper maintenance and under normal conditions, a used unit in condition grade B can last 2–4 years. Units with more than 10,000 operational hours may fail within 12–18 months.

Q: Is the HP JG336-61001 5900AF-48xGT-4QSFP+ Switch more cost-effective than a new one?
A: Yes. Used units typically cost $400, while new units can exceed $1,000. This means a used switch can save 40–60% in upfront costs, though savings may vary based on condition and vendor.

Q: How does the HP JG336-61001 5900AF-48xGT-4QSFP+ Switch compare to the 5900-48Y4C?
A: The 5900AF-48xGT-4QSFP+ offers 48 Gigabit ports and 4 QSFP+ ports, while the 5900-48Y4C has 48 10/100/1000BASE-T ports and 4 10GBASE-X SFP+ ports. The 5900AF model is better suited for high-density environments, but the 5900-48Y4C is more common in edge deployments.