Hp Hp Jl087 61001 Aruba 1050W Power Supply For 2930M Switch — High-Performance Networking Power Supply (HP)

How Much Does HP JL087-61001 Aruba 1050W Power Supply For 2930M Switch Cost in 2026?

As of 2026, the HP JL087-61001 Aruba 1050W Power Supply for the 2930M Switch typically ranges between $243 for a used, refurbished unit in condition grade B. Refurbished units from trusted vendors like Ferrotec and Axus Technology are commonly available in this price range, offering 40–60% savings compared to a new unit, which can cost upwards of $600. These savings are particularly valuable for data centers and IT departments managing multiple switches, where a single power supply failure can cost upwards of $5,000 in downtime and emergency replacement costs.

It’s important to note that the price is consistent across most condition tiers because this part is not commonly found in higher-grade refurbished stock. Units in condition grade B are typically acceptable for most applications, but they may show signs of wear and have limited testing history. Always verify with the seller if the unit has passed full functional testing and has a recent calibration or service history.

HP JL087-61001 Aruba 1050W Power Supply For 2930M Switch Specifications and Compatible Tools

The HP JL087-61001 is a 1050W power supply designed for use with the Aruba 2930M Switch series, which was commonly deployed between 2015 and 2020. It typically operates within a 100–240V AC input range and delivers 12V DC output. The unit is commonly rated for 50,000 RF-hours of operation under normal conditions, though this metric is rarely verified in used units.

This power supply is compatible with the Aruba 2930M-24G-PoE+ and 2930M-24G-PoE++ models. It is not compatible with the newer Aruba 3810M series, which uses a different power supply model (JL087-61002). Using an incompatible power supply can result in system failure, data loss, and potential hardware damage, which can cost upwards of $10,000 in repair and downtime.

Always verify compatibility with your specific switch model before purchasing. While some specs are commonly listed, others may vary slightly depending on the production batch. It’s recommended to cross-check with the manufacturer or a certified refurbisher.

What to Check Before Buying a Used HP JL087-61001 Aruba 1050W Power Supply For 2930M Switch in 2026

1. Verify the production year: Units produced before 2018 may have different internal components and are more likely to fail under high load. Aim for units produced between 2018 and 2020.

2. Check for full functional testing: A good refurbisher will perform a full power-on test, including load testing at 80% of rated capacity. Units that only pass a basic continuity test may fail under real-world conditions.

3. Look for a clear service history: Units with a documented service history and recent calibration (within the last 12 months) are more reliable. Reject any unit that cannot provide this information.

4. Inspect for physical damage: Look for signs of overheating, burn marks, or swollen capacitors. These are strong indicators of failure and should be a hard reject.

5. Confirm compatibility with your switch model: Cross-check the part number with your Aruba 2930M model. Using the wrong power supply can lead to system failure and downtime, costing up to $8,000 in lost productivity and repair costs.

FAQ

Q: Can I use the HP JL087-61001 in a newer Aruba 3810M switch?

A: No. The JL087-61001 is not compatible with the Aruba 3810M series. These switches require the JL087-61002 model. Using the wrong power supply can cause system failure and hardware damage.

Q: Should I replace my HP JL087-61001 every 5 years?

A: It’s generally recommended to replace power supplies every 5–7 years, especially in high-usage environments. Units over 8 years old may have a higher risk of failure, which can cost up to $7,000 in downtime and emergency replacement.

Q: What is the difference between a used and a refurbished HP JL087-61001?

A: A used unit may not have been tested or cleaned, while a refurbished unit has been inspected, tested, and often repaired. Refurbished units typically cost between $243 and $270, offering better reliability and a lower risk of failure.

Q: How long does a HP JL087-61001 last under normal use?

A: Under normal conditions, this power supply is typically rated for 50,000 RF-hours, which translates to about 5.7 years of continuous 24/7 operation. However, real-world lifespan can vary based on load, environment, and maintenance.

Q: Is it worth buying a used HP JL087-61001 instead of a new one?

A: Yes, especially if you're managing multiple switches. Used units can save 40–60% compared to new, and with proper testing and sourcing, they can be just as reliable. Just be sure to source from a reputable refurbisher like Ferrotec or Axus Technology.