Hp Hp Proliant Dl560 Gen8 V2 5 Sff Rack Server Chassis — High-Capacity 5-Slot Rack Server Chassis (HP)

How Much Does HP ProLiant DL560 Gen8 v2 5 SFF Rack Server Chassis Cost in 2026?

As of July 2026, the HP ProLiant DL560 Gen8 v2 5 SFF Rack Server Chassis is typically listed in the used and refurbished market at a price range of $243. This is a single-tier pricing due to the part being offered in a standard B-grade condition. Refurbished units from vendors like Axus Technology and Ferrotec are commonly priced within this range, offering a 40–60% cost savings compared to a new chassis, which would typically retail for $400–$600 if still available.

The cost of failure for purchasing a defective or low-quality chassis can be significant. A faulty chassis can lead to extended downtime, with data centers estimating an average cost of $1,200–$1,500 per hour in lost productivity. It's also worth noting that the chassis was originally launched in 2013 and has been out of production for over a decade, so condition is a critical factor. Units with more than 10,000 operational hours or signs of physical stress are more likely to fail prematurely.

HP ProLiant DL560 Gen8 v2 5 SFF Rack Server Chassis Specifications and Compatible Tools

The HP ProLiant DL560 Gen8 v2 is a 3U rack server chassis with five SFF (Small Form Factor) drive bays and support for up to four hot-plug PCIe expansion cards. It typically supports Intel Xeon E5-4600 series processors and up to 1.5TB of DDR3 ECC memory. The chassis is designed for 1+1 redundant power supply configurations and features a standard 460W or 750W power supply input.

The chassis has a typical lifecycle of around 8–10 years, with most units reaching 10,000–15,000 operational hours before requiring replacement. It is commonly compatible with HP ProLiant DL360 Gen8 and Gen9 systems, as well as HP ProLiant DL580 Gen8 systems from 2012–2015. However, it is not compatible with newer Gen10 or Gen11 systems due to differences in form factor and power requirements.

Failure of the chassis can lead to complete server inoperability, with repair or replacement costs ranging from $500–$1,000 depending on the system. Always verify compatibility with the specific server model before installation.

What to Check Before Buying a Used HP ProLiant DL560 Gen8 v2 5 SFF Rack Server Chassis in 2026

1. Check the production year: The chassis was manufactured between 2013 and 2015. Units older than 10 years may have degraded internal components.

2. Inspect the power supply connectors: Look for signs of corrosion or wear on the 460W/750W power supply ports. A damaged connector can prevent the chassis from powering up.

3. Run a thermal stress test: Use HP’s Insight Diagnostics or a third-party thermal load tool to simulate high workloads. If the chassis overheats above 70°C under load, reject it.

4. Verify fan and airflow integrity: The chassis has four hot-swappable fans. If more than one fan is non-functional or shows signs of wear, the unit should be rejected.

5. Reject if the chassis has more than 12,000 operational hours: Units beyond this threshold are at higher risk of mechanical failure, with failure rates increasing by 20% after 10,000 hours.

Purchasing a defective chassis can lead to downtime of 2–5 days during replacement, costing an enterprise up to $10,000 in lost revenue.

FAQ

Q: Can the HP ProLiant DL560 Gen8 v2 chassis be used with a Gen9 server?
A: No. The DL560 Gen8 v2 is not compatible with Gen9 systems due to differences in power requirements and form factor. Attempting to use it may result in system instability or failure to boot.

Q: Should I buy a DL560 Gen8 v2 chassis with more than 10,000 hours of use?
A: It’s not recommended. Units with over 10,000 hours have a 20–30% higher failure rate. If you must use one, ensure it has a full diagnostic report and a warranty from a reputable refurbisher like Ferrotec.

Q: What is the average lifespan of a DL560 Gen8 v2 chassis?
A: The average operational lifespan is 8–10 years, or 10,000–15,000 hours, depending on usage and environmental conditions. Beyond that, failure rates rise sharply.

Q: How does the DL560 Gen8 v2 compare to the DL580 Gen8 in terms of compatibility?
A: The DL560 Gen8 v2 is smaller and supports fewer expansion slots than the DL580 Gen8. It is compatible with the same processor and memory configurations but is not interchangeable due to differences in chassis size and power requirements.

Q: Is it worth buying a used DL560 Gen8 v2 chassis in 2026?
A: Yes, if you need a 5-SFF chassis and can source a unit with under 10,000 hours and a full diagnostic report. The cost savings of 40–60% over new units can be significant, especially for legacy systems.