Hp Hpe Jc091A 5800 4 Port 10Gbe Sfp Module — 10GBE SFP+ Module for HP Networking (HP)

How Much Does HPE JC091A 5800 4-Port 10GBE SFP+ Module Cost in 2026?

In 2026, the HPE JC091A 5800 4-Port 10GBE SFP+ Module typically ranges between $181 for used or refurbished units. Refurbished modules from vendors like Ferrotec and Axus Technology often fall into this price range, with savings of 40–60% compared to new units, which can cost upwards of $450. The cost of failure is significant—installing a faulty module can lead to network outages and downtime costing upwards of $1,000 per hour in mission-critical environments.

Used modules are typically graded based on condition, with grade B units being the most common in this price range. These modules may show signs of wear but are fully functional and tested. However, it's important to note that modules with more than 10,000 operational hours or signs of physical damage should be avoided to prevent premature failure.

HPE JC091A 5800 4-Port 10GBE SFP+ Module Specifications and Compatible Tools

The HPE JC091A 5800 is a 4-port SFP+ module that supports 10 Gigabit Ethernet speeds. It typically operates at 10.3125 Gbps and is designed for use in HP ProLiant servers and switches, particularly models from the 2014–2017 production years. The module is commonly used in data centers and enterprise environments where high-speed, low-latency networking is required.

The typical lifecycle of this module is around 10,000 operational hours before degradation becomes a concern. It is compatible with HP switches such as the 5400zl and 5500 series. However, it is not compatible with newer HPE 5940 or 5930 series switches, which use a different SFP+ module (e.g., HPE J9767A). Using an incompatible module can result in the switch failing to recognize the port, leading to configuration errors and potential downtime.

What to Check Before Buying a Used HPE JC091A 5800 4-Port 10GBE SFP+ Module in 2026

1. Verify Production Year: Modules produced before 2015 may have a higher failure rate. Look for modules with a production date between 2015 and 2017.

2. Test with Link Loopback: This test confirms that the module can transmit and receive data. A failed loopback test is a hard reject.

3. Check for Physical Damage: Look for bent pins, cracked housing, or signs of overheating. Modules with more than 10,000 operational hours should be avoided.

4. Signal Quality Test: Use a fiber optic tester or SFP+ tester to check signal integrity. A signal loss of more than 3 dB is a red flag.

5. Request Burn-in Report: A module that has passed a 24-hour burn-in test is more likely to be reliable. Modules without this data should be approached with caution.

Purchasing a faulty module can lead to network instability, requiring replacement and causing downtime that can cost up to $2,500 in lost productivity and repair labor.

FAQ

Q: Can I use the HPE JC091A 5800 with a 2020 HPE 5940 switch?
A: No. The HPE JC091A 5800 is not compatible with the HPE 5940 switch. It requires a newer module like the HPE J9767A. Using the wrong module will result in the port not being recognized.

Q: Should I buy a used HPE JC091A 5800 module with 12,000 operational hours?
A: No. Modules with more than 10,000 operational hours are at a significantly higher risk of failure. It’s better to source a module with under 8,000 hours.

Q: How long can I expect a used HPE JC091A 5800 module to last?
A: With proper maintenance and under normal conditions, a used module can last between 3 to 5 years. Modules that have been tested and are under 10,000 operational hours are the most reliable.

Q: What’s the difference between the HPE JC091A 5800 and the HPE J9767A?
A: The HPE J9767A is a newer SFP+ module designed for 10GBASE-T copper and is compatible with HPE 5940 and 5930 switches. The JC091A 5800 is an older module for fiber-based 10GBE and is not compatible with newer switches.

Q: How much can I save by buying a used HPE JC091A 5800 module?
A: You can save between 40–60% compared to buying a new module. A used module typically costs around $181, while a new one can cost over $450.