Hp Hpe Jf290 61101 Flexnetwork 7500 8 Port 10G Sfp Sc Module — High-Performance Networking Module (HP)

How Much Does HPE JF290-61101 FlexNetwork 7500 8-Port 10G SFP+ SC Module Cost in 2026?

As of July 2026, the HPE JF290-61101 FlexNetwork 7500 8-Port 10G SFP+ SC Module is priced at $186 in the used/refurbished market. This price is typically for a module in condition grade B, with no major functional issues. Refurbished units from vendors like Axus Technology and Ferrotec typically fall within this range, offering a 40–60% discount compared to the original manufacturer’s price, which can exceed $450 for a new unit.

Purchasing a used module can save a facility up to $264 per unit, which is significant when replacing multiple modules in a data center or enterprise network. However, if the module fails within the first 6 months of use due to undetected faults, the cost of failure can be as high as $1,200 in downtime and replacement labor. Modules with a condition grade lower than B should be avoided, as they are more likely to fail under load or during high-traffic periods.

HPE JF290-61101 FlexNetwork 7500 8-Port 10G SFP+ SC Module Specifications and Compatible Tools

The HPE JF290-61101 is an 8-port 10G SFP+ module that supports SC fiber optic connections. It is commonly used in the FlexNetwork 7500 series switches, typically deployed in 2015–2017 models. The module is rated for up to 10,000 RF cycles and has a typical operational lifespan of 5–7 years with proper maintenance.

This module is compatible with HP FlexNetwork 7500 switches, including the 7500-48Y and 7500-48T models. It is not compatible with the newer 7500M series, which requires a different SFP+ module such as the JF290-61102. Using an incompatible module can result in port lockouts and system instability, potentially costing $500–$800 in technician time to resolve.

What to Check Before Buying a Used HPE JF290-61101 FlexNetwork 7500 8-Port 10G SFP+ SC Module in 2026

1. Production Year: Modules produced before 2016 are more likely to have wear on the SFP+ connectors. Avoid units older than 8 years unless they have been fully tested.

2. Fiber Port Inspection: Use a fiber inspection microscope to check for dust or scratches on the SC ports. Reject the module if any port shows visible damage.

3. Signal Integrity Test: Perform a signal integrity test using a SFP+ tester or a compatible switch. A module that fails to maintain a stable 10Gbps link should be rejected.

4. Power-on Self-Test (POST): Run a POST to check for internal faults. If the module fails to initialize, it should be returned or discounted by at least 30%.

5. Firmware Version: Ensure the firmware is compatible with your switch model. Mismatched firmware can cause boot failures, which may cost $700–$1,000 in downtime and reconfiguration.

Purchasing a module that fails these checks can lead to immediate system instability, with potential costs exceeding $1,000 in lost productivity and repair labor.

FAQ

Q: Can I use the HPE JF290-61101 in a FlexNetwork 7500M switch?
A: No. The JF290-61101 is not compatible with the FlexNetwork 7500M series. You need the JF290-61102 module for those switches. Using the wrong module can cause port lockouts and system instability.

Q: Should I buy a used HPE JF290-61101 with a condition grade lower than B?
A: No. Modules with a condition grade lower than B are more likely to fail within 6 months, potentially costing $1,200 in downtime and replacement costs. Stick to modules rated B or higher.

Q: How long can I expect the HPE JF290-61101 to last in a data center environment?
A: With proper maintenance and regular testing, the module can last 5–7 years. Modules used in high-traffic environments may require more frequent inspection to avoid failures.

Q: What’s the difference between the HPE JF290-61101 and the JF290-61102?
A: The JF290-61102 is designed for the FlexNetwork 7500M series, introduced in 2018. The JF290-61101 is for the earlier 7500 series. They are not interchangeable.

Q: Can I save money by buying a used HPE JF290-61101 instead of a new one?
A: Yes. Used modules typically cost $186, which is 40–60% less than the $450+ price for a new unit. Just ensure the module is tested and rated B or higher to avoid costly failures.