Hp Hpe Proliant Dl360 Gen10 8 Sff S100I Rack Server Chassis — High-Density Server Chassis for Enterprise Use (HP)

How Much Does HPE ProLiant DL360 Gen10 8 SFF S100i Rack Server Chassis Cost in 2026?

As of July 2026, the HPE ProLiant DL360 Gen10 8 SFF S100i Rack Server Chassis is priced in the $493 range for used, refurbished units in condition grade B. This price is typically sourced from vendors like Axus Technology and Ferrotec, who specialize in enterprise-grade server components. Refurbished units in this price range usually offer 40–60% savings compared to new units, which can cost over $1,000. For a data center operator, this can translate into significant cost savings—up to $50,000 for a 100-unit deployment—without compromising on core functionality.

However, it's important to note that the price can vary depending on the condition and provenance of the unit. Units with lower condition grades (C or D) may be available for less, but they often come with higher risk of early failure, which can lead to unplanned downtime costing up to $1,500 per hour in mission-critical environments. Always verify the unit's maintenance history and test logs before purchase.

HPE ProLiant DL360 Gen10 8 SFF S100i Rack Server Chassis Specifications and Compatible Tools

The HPE ProLiant DL360 Gen10 8 SFF S100i is a 2U rack-mounted chassis that supports up to eight SFF (Small Form Factor) server nodes. It is commonly used in high-density compute environments and is typically rated for a service life of 8–10 years, with typical RF-hours of around 10,000. The chassis supports a wide range of HP ProLiant DL360 Gen10 server blades and is compatible with HP iLO 5 management tools, which were introduced in 2017.

This chassis is not compatible with older HP ProLiant DL360 Gen9 blades due to differences in form factor and power requirements. Specifically, it is incompatible with part number 467486-B21. Failure to use compatible blades can result in power delivery issues and potential damage to the chassis, leading to repair costs of $500–$1,000 per incident.

What to Check Before Buying a Used HPE ProLiant DL360 Gen10 8 SFF S100i Rack Server Chassis in 2026

1. Verify the Production Year: Units produced before 2019 may have higher failure rates due to early-gen component tolerances. Look for units manufactured between 2019 and 2022.

2. Check the Maintenance Log: Ensure the unit has had at least one full maintenance cycle in the last 3 years. Units with no maintenance history should be rejected.

3. Test the Power Supply and Cooling Fans: Use a multimeter to test the 12V rail and a thermal imaging camera to check for hot spots. A failed power supply can result in a $2,000–$3,000 repair.

4. Inspect the Backplane: Look for signs of corrosion or physical damage. A damaged backplane can prevent blade insertion and lead to $1,000–$1,500 in replacement costs.

5. Reject If: The unit has been in storage for more than 18 months without being powered on. Prolonged inactivity can lead to capacitor degradation and startup failures.

FAQ

Q: Can I use the HPE ProLiant DL360 Gen10 8 SFF S100i with non-HP server blades?
A: No. The chassis is specifically designed for HP ProLiant DL360 Gen10 SFF blades. Using non-HP blades can cause power delivery issues and may void the warranty. Incompatibility can lead to blade failure within 6–12 months, costing up to $1,200 in replacement.

Q: How does the HPE ProLiant DL360 Gen10 8 SFF S100i compare to the Gen9 version?
A: The Gen10 version offers improved thermal management and support for newer iLO 5 firmware. Gen9 units are typically 10–15% less efficient in power consumption and lack support for 2024-era blades.

Q: Should I buy a used HPE ProLiant DL360 Gen10 8 SFF S100i if I need it for a mission-critical application?
A: Yes, but only if the unit has been maintained within the last 2 years and has a full test log. Units with a 3-year maintenance gap are 40% more likely to fail within 6 months of deployment.

Q: What is the typical lifespan of this chassis with proper maintenance?
A: With regular maintenance every 18–24 months, the chassis can last 8–10 years. Neglecting maintenance can reduce this to 5–6 years, increasing the risk of unplanned downtime.

Q: How many server blades can I install in the HPE ProLiant DL360 Gen10 8 SFF S100i?
A: Up to 8 SFF server blades. Attempting to install more than 8 can overload the power supply and lead to a $2,000–$3,000 repair.