Hp Hpe Proliant Dl360 Gen10 No Ctrl 8Sff 1U Rack Server Chassi — 1U Rack Server Chassis for High-Density Deployments (HP)

How Much Does HPE ProLiant DL360 Gen10 No Ctrl 8*SFF 1U Rack Server Chassis Cost in 2026?

As of 2026, the HPE ProLiant DL360 Gen10 No Ctrl 8*SFF 1U Rack Server Chassis is typically priced in the $400 range for used or refurbished units in condition grade B. Units in higher condition grades (A or A-) may command prices up to $500, while lower-grade (C) units can be found for as low as $300. Refurbishers like Axus Technology and Ferrotec commonly list this part in their inventory, offering savings of 40–60% compared to new units, which can exceed $1,000.

The cost of failure for a faulty chassis can be significant—up to $5,000 in lost uptime and repair labor if the unit fails in a production environment. It's also worth noting that most of these units are from the 2018–2020 production window, so older models may have higher failure rates. Always verify the exact condition and test logs with the seller before purchase.

HPE ProLiant DL360 Gen10 No Ctrl 8*SFF 1U Rack Server Chassis Specifications and Compatible Tools

The HPE ProLiant DL360 Gen10 chassis is a 1U rackmount unit designed to house up to eight small form factor (SFF) drives. It typically supports SAS and SATA drives with a maximum capacity of 10TB per drive. The chassis is commonly used in high-density storage arrays and typically features a 3.5-inch drive bay with a hot-swappable design. It is compatible with a range of HP ProLiant DL360 Gen10 server models from 2017–2020.

The chassis is typically rated for 100,000 RF-hours and is often used with HP Smart Storage tools from 2018 onward. However, it is not compatible with newer HP ProLiant DL380 Gen10 models due to differences in backplane design (specifically, part number 687417-B21). Failure of the chassis can lead to complete drive array failure, causing downtime of 4–6 hours in most environments.

What to Check Before Buying a Used HPE ProLiant DL360 Gen10 No Ctrl 8*SFF 1U Rack Server Chassis in 2026

1. Verify Production Year: Units from 2018–2020 are most common. Units older than 2017 may have higher failure rates and should be avoided.

2. Check for Corrosion or Physical Damage: Look for signs of water ingress or bent drive bays. Reject if there is visible rust or damage to the rear I/O panel.

3. Run a Drive Insertion Test: Use an HP Smart Storage Administrator tool to test drive insertion and ejection. Failure to recognize inserted drives is a red flag.

4. Review Test Logs: Ask for a full diagnostic report from the seller. Units with more than 80,000 RF-hours should be inspected more closely.

5. Confirm Backplane Compatibility: Ensure the chassis is compatible with your existing server model. A mismatch can lead to a full system failure and repair costs of $1,500–$2,000.

Purchasing a faulty chassis can result in extended downtime and costly repairs, so due diligence is essential.

FAQ

Q: Can I use the HPE ProLiant DL360 Gen10 chassis with newer HP ProLiant DL380 Gen10 servers?
A: No. The DL360 Gen10 chassis is not compatible with DL380 Gen10 servers due to differences in backplane design. Attempting to use it may result in hardware failure and require a full chassis replacement at a cost of $1,200–$1,500.

Q: Should I buy a used DL360 Gen10 chassis if it has 90,000 RF-hours?
A: Yes, but with caution. Units with up to 90,000 RF-hours are still within acceptable limits, but should be tested thoroughly. Units over 100,000 RF-hours are at higher risk of failure and should be avoided.

Q: How long can I expect a used DL360 Gen10 chassis to last in a production environment?
A: With proper maintenance, a used DL360 Gen10 chassis can last 3–5 years in a production setting. Units over 5 years old may require more frequent inspections and have a higher risk of failure.

Q: What is the difference between the DL360 Gen10 and Gen9 chassis?
A: The Gen10 chassis supports more advanced storage configurations and has improved hot-swap capabilities. Gen9 models are generally older, with production ending in 2017. Gen10 models are more commonly found in 2026 and are better suited for modern storage arrays.

Q: What is the average downtime if the chassis fails in a data center?
A: If the chassis fails in a production environment, downtime can range from 4 to 6 hours, depending on the availability of replacement parts and the complexity of the storage array.