Hp Hpe Proliant Dl380 Gen10 24Sff 2U Rack Server Chassis — High-Density Server Housing (HP)

How Much Does HPE ProLiant DL380 Gen10 24*SFF 2U Rack Server Chassis Cost in 2026?

As of July 2026, the HPE ProLiant DL380 Gen10 24*SFF 2U Rack Server Chassis is priced between $387–$387 in the used market, with the average price hovering around $387. This price point is for units in condition grade B, typically sourced from enterprise data centers and refurbished by vendors such as Axus Technology and Ferrotec. Units in higher condition grades, such as A or A+, can command up to $50 more, while lower-grade units may be available for as low as $350–$360. Compared to new units, which typically cost between $900–$1,200, used options offer savings of 40–60%.

For data centers or IT departments, purchasing a faulty or misreported unit can lead to downtime costs of $2,000–$5,000 per day, depending on the scale of operations. It's also worth noting that 20–30% of used server chassis units on the market may have undetected backplane or power rail issues, which can lead to system instability and require costly replacements.

HPE ProLiant DL380 Gen10 24*SFF 2U Rack Server Chassis Specifications and Compatible Tools

The HPE ProLiant DL380 Gen10 24*SFF 2U Rack Server Chassis is a 2U rackmount unit designed to house up to 24 small form factor (SFF) drives. It supports standard 1.8" or 2.5" drives and is commonly used in high-density storage configurations. The chassis is typically rated for 100,000–150,000 RF-hours and is compatible with HPE ProLiant DL380 Gen10 server systems. It was commonly used in production from 2018 to 2021.

This chassis is compatible with HPE Smart Storage Backplanes and HPE SAS Expander Modules. It is not compatible with later Gen11 or Gen12 chassis-specific backplanes such as the HPE 810998-B21. Using incompatible parts can lead to signal degradation and drive failures, which can cost $1,500–$3,000 in replacement and labor costs.

What to Check Before Buying a Used HPE ProLiant DL380 Gen10 24*SFF 2U Rack Server Chassis in 2026

1. Verify the Production Year: The DL380 Gen10 was produced from 2018 to 2021. Units produced before 2019 may have lower build quality and are more prone to backplane wear. Reject any unit older than 2017.

2. Check for Power Rail Integrity: Use a continuity tester to verify the integrity of the power rails. A failed rail can prevent all drives from powering up, leading to a complete system failure and $2,500 in lost data and downtime.

3. Inspect the Backplane: Look for signs of corrosion or burn marks. A damaged backplane can cause intermittent drive failures. Reject any unit with visible damage to the backplane connectors.

4. Test with a Known Good Drive: Insert a known working drive and boot the system. If the drive is not recognized, the chassis may have a faulty SAS expander or controller, which is not user-serviceable and can cost $1,200 to replace.

5. Review Seller Documentation: Ensure the seller provides a full lifecycle report, including the number of hot-swaps and drive insertions. Units with over 120,000 cycles may be nearing end-of-life and should be approached with caution.

FAQ

Q: Can I use the HPE ProLiant DL380 Gen10 24*SFF 2U Rack Server Chassis with a Gen11 server?

A: No. The Gen10 chassis is not compatible with Gen11 servers due to differences in backplane and power rail design. Attempting to use it can result in $1,800 in component damage and system downtime.

Q: Should I buy a used HPE ProLiant DL380 Gen10 24*SFF 2U Rack Server Chassis with over 120,000 RF-hours?

A: It’s not recommended. Units with over 120,000 RF-hours are at a 40–50% higher risk of backplane failure. Consider a unit with under 100,000 RF-hours for better reliability.

Q: How long can I expect a used HPE ProLiant DL380 Gen10 24*SFF 2U Rack Server Chassis to last?

A: With proper maintenance and under normal usage, a Gen10 chassis can last 5–7 years. Units with over 150,000 RF-hours may only last another 1–2 years before requiring replacement.

Q: What is the difference between the HPE ProLiant DL380 Gen10 and Gen11 chassis?

A: The Gen11 chassis includes updated power management and thermal design. The Gen10 chassis lacks support for newer SAS expanders like the HPE 810998-B21, which can limit compatibility with newer drives and controllers.

Q: Can I install NVMe drives in the HPE ProLiant DL380 Gen10 24*SFF 2U Rack Server Chassis?

A: Yes, but only if the backplane and SAS expander support NVMe. Most Gen10 chassis units do not natively support NVMe drives. Adding NVMe without proper compatibility can lead to $1,000 in unnecessary hardware and labor costs.