Hp Hpe Proliant Dl380 Gen10 8 Lff 4 Lff 2 Sff Nvme Rack Se — High-Density Server Chassis for Enterprise Storage (HP)

How Much Does HPE ProLiant DL380 Gen10 8 LFF + 4 LFF + 2 SFF NVMe Rack Server Chassis Cost in 2026?

As of July 2026, the HPE ProLiant DL380 Gen10 8 LFF + 4 LFF + 2 SFF NVMe Rack Server Chassis is priced at $1,499 for a used, refurbished unit in condition grade B. Refurbished units from vendors like Axus Technology and Covalent Materials typically range between $1,400 and $1,600, depending on the condition and included components. New units from HP or authorized resellers are significantly more expensive, often exceeding $3,500. This means buyers can save between 40–60% by opting for a used or refurbished model.

However, the cost of failure is high: a defective chassis can lead to $10,000+ in downtime costs for enterprise environments, especially if it causes data loss or system instability. Units in condition grade B may show signs of wear but typically have been tested and verified for basic functionality. Always request a full diagnostic report before purchase.

HPE ProLiant DL380 Gen10 8 LFF + 4 LFF + 2 SFF NVMe Rack Server Chassis Specifications and Compatible Tools

The HPE ProLiant DL380 Gen10 is a 2U rack-mounted server chassis supporting up to 8 LFF (Large Form Factor) drives, 4 LFF drives in a second bay, and 2 SFF (Small Form Factor) NVMe drives. It typically supports Intel Xeon Scalable processors (Skylake and Cascade Lake generations), up to 2 TB of DDR4 ECC memory, and dual 10GbE ports. The chassis is commonly used in data centers for storage, virtualization, and high-performance computing.

The server is compatible with HPE Smart Storage Battery (SSB) models from 2016–2020, such as the HPE 660119-B21, and HPE Smart Array controllers like the HPE P408i-a SR Gen10. Units with incompatible firmware or outdated BIOS versions may fail to boot or recognize drives. For example, using a HPE P408i-a SR Gen8 in a Gen10 chassis can lead to drive recognition failures and $5,000+ in repair costs.

What to Check Before Buying a Used HPE ProLiant DL380 Gen10 8 LFF + 4 LFF + 2 SFF NVMe Rack Server Chassis in 2026

1. Firmware and BIOS Version: Ensure the BIOS is at least version 2.10 or later. Older versions may lack support for newer NVMe drives and can cause boot failures.

2. Drive Health and Controller Compatibility: Use HPE Smart Storage Administrator (SSA) to scan for drive errors. Reject units with more than 3% bad sectors or uncorrectable errors.

3. Power Supply and Fan Health: Run HP iLO (Integrated Lights-Out) diagnostics to check for failed fans or power supply units. A single failed PSU can lead to $2,500+ in replacement costs.

4. Production Year and Usage History: Units produced between 2017–2020 are most common in the used market. Avoid units older than 2016, as capacitors and power components may degrade.

5. Reject if: The chassis has more than 100,000 RF-hours of runtime, or shows visible signs of water damage. These units are likely to fail within 6–12 months, costing $7,000+ in downtime and repairs.

FAQ

Q: Can I use this chassis with NVMe drives from 2025?
A: Yes, but only if the BIOS is updated to at least version 2.15 and the controller is an HPE Smart Array P408i-a SR Gen10. Older controllers may not recognize newer NVMe drives.

Q: How long can I expect this chassis to last in a production environment?
A: With proper maintenance and firmware updates, the DL380 Gen10 can last 6–8 years. Beyond that, component degradation (especially capacitors and power supplies) increases the risk of failure.

Q: Is this chassis suitable for 24/7 operation in a data center?
A: Yes, but only if the unit has been tested for 100% fan and PSU functionality. A failed fan can cause overheating and $4,000+ in hardware damage within hours.

Q: How does this compare to the HPE DL380 Gen11 in terms of cost and performance?
A: The Gen11 offers better performance and newer features but costs $1,500–$2,000 more used. The Gen10 is a more cost-effective option for workloads that don’t require the latest hardware.

Q: Should I buy a used DL380 Gen10 or a new DL380 Gen11?
A: If your budget is tight and you don’t need the latest features, the Gen10 is a solid choice. However, if you plan to use it for more than 5 years, the Gen11 may be more future-proof and reduce long-term maintenance costs.