Hp Hpe Proliant Dl380 Gen10 8 Sff 2 Sff No Controller Rack Se — Rack Server Chassis for Data Centers (HP)

How Much Does HPE ProLiant DL380 Gen10 8 SFF + 2 SFF No Controller Rack Server Chassis Cost in 2026?

As of July 2026, the HPE ProLiant DL380 Gen10 8 SFF + 2 SFF No Controller Rack Server Chassis is listed in the used market with a fixed price of $437. This is typically a mid-tier condition unit, often sourced from decommissioned data centers or surplus inventory. Refurbishers like Ferrotec and Axus Technology commonly handle these units, offering savings of 40–60% compared to new models, which can cost upwards of $1,000–$1,200.

Condition tiers can affect pricing: a Grade A unit with full documentation and verified testing might command up to $500, while a Grade B or C unit may drop to $300–$350. However, lower-grade units may carry a higher risk of failure, which could lead to downtime costs of $2,000–$5,000 per incident in enterprise environments. It’s also worth noting that 10–15% of used units may fail within the first 30 days due to undetected wear or improper handling during decommissioning.

HPE ProLiant DL380 Gen10 8 SFF + 2 SFF No Controller Rack Server Chassis Specifications and Compatible Tools

The HPE ProLiant DL380 Gen10 8 SFF + 2 SFF No Controller Rack Server Chassis is a 2U rackmount chassis designed to accommodate up to 10 SFF drives, with 8 dedicated SFF bays and 2 additional SFF hot-swap bays. It supports standard 2.5-inch SFF drives and is commonly used in environments requiring high storage density. The chassis is typically rated for a service life of 5–7 years, with typical RF-hours of 10,000–15,000 before requiring maintenance.

This chassis is compatible with HP ProLiant DL380 Gen10 and Gen11 server platforms, particularly models from 2019–2022. It is not compatible with Gen9 or earlier systems due to differences in backplane design. A known incompatibility exists with HP Part Number 640427-B21, which uses a different power distribution layout. Failure to match the correct chassis to the server can result in improper cooling, leading to thermal shutdowns and potential hardware damage, costing $1,500–$3,000 in repairs.

What to Check Before Buying a Used HPE ProLiant DL380 Gen10 8 SFF + 2 SFF No Controller Rack Server Chassis in 2026

1. Physical Condition and Corrosion: Inspect for signs of corrosion, especially around the power supply and drive bays. Reject units with visible rust or pitting, as this can lead to electrical shorts and system failure.

2. Drive Bay Functionality: Perform a basic drive insertion test using a known-good SFF drive. Ensure all 10 bays accept drives and that hot-swap functionality works. A non-functional hot-swap bay can reduce system reliability by 30–40%.

3. Cooling System Integrity: Check for dust buildup in fan slots and inspect fan blades for damage. Fans should spin freely and operate at full speed. A failed fan can lead to overheating and hardware degradation, costing $1,000–$2,500 in repairs.

4. Backplane and Power Distribution: Verify that the backplane is intact and free of burn marks. Use a multimeter to test power distribution to each drive bay. A faulty backplane can cause intermittent drive failures, increasing maintenance costs.

5. Production Year and Usage History: Units produced before 2019 may have a higher failure rate due to early-gen manufacturing issues. Reject any unit with a production year before 2018, as these may not meet current reliability standards.

FAQ

Q: Can I use this chassis with a Gen11 server?
A: Yes, the HPE ProLiant DL380 Gen10 8 SFF + 2 SFF chassis is typically compatible with Gen11 servers, but you must verify the backplane and power compatibility. Units produced after 2020 are more likely to work without modification.

Q: Should I buy a used chassis with a Grade C condition rating?
A: No. Grade C units often have undetected faults and may fail within 30–60 days. A failed chassis can lead to downtime costs of $2,000–$4,000. Stick to Grade B or higher for reliability.

Q: How long can I expect this chassis to last in a data center environment?
A: With proper maintenance, this chassis typically lasts 5–7 years. After 7 years, failure rates increase by 20–30%, and replacement becomes more cost-effective.

Q: What is the difference between this chassis and the Gen9 version?
A: The Gen10 chassis has a redesigned backplane and improved power distribution. The Gen9 version (Part Number 640427-B21) is not compatible due to different drive bay configurations and power routing.

Q: Is it worth the cost to buy used instead of new?
A: Yes. Used units can save 40–60% compared to new, but ensure the unit is Grade B or higher. A failed used unit can cost $1,500–$3,000 in repairs, so sourcing from a reputable refurbisher like Ferrotec or Axus Technology is recommended.