Hp Hpe Proliant Dl380 Gen10 8 Sff 2 Sff Rack Server Chassis — 2U Rack-Mount Server Chassis for Data Centers (HP)

How Much Does HPE ProLiant DL380 Gen10 8 SFF + 2 SFF Rack Server Chassis Cost in 2026?

As of July 2026, the HPE ProLiant DL380 Gen10 8 SFF + 2 SFF Rack Server Chassis is priced in the range of $437 for a used, refurbished unit in condition grade B. This is typically sourced from vendors like Axus Technology and Ferrotec, who specialize in enterprise server components. A new unit from HP or an authorized reseller would cost approximately $1,000–$1,200, meaning buyers can save 40–60% by opting for a used version.

The cost of failure is significant: if a data center operator purchases a faulty chassis and it fails within the first 90 days, the downtime could cost between $3,000 and $5,000 in lost productivity, especially in mission-critical environments. It's also worth noting that the condition grade B typically includes units with minor cosmetic wear but fully functional components. Always verify the unit's service history and test logs before purchase.

HPE ProLiant DL380 Gen10 8 SFF + 2 SFF Rack Server Chassis Specifications and Compatible Tools

The HPE ProLiant DL380 Gen10 8 SFF + 2 SFF Rack Server Chassis is a 2U (3.5-inch tall) rack-mountable chassis that supports up to 10 small form factor (SFF) drives, with 8 internal and 2 external bays. It is typically compatible with Intel Xeon Scalable processors and supports up to 2 TB of DDR4 memory. The chassis has a typical power consumption of 180–220W under full load and is designed for high airflow efficiency in data center environments.

This chassis is commonly used in environments with a production age of 2018–2020, meaning it has typically seen 5–8 years of service. It is compatible with HP Smart Storage tools and HP iLO 5 management systems. However, it is not compatible with newer AMD EPYC-based blade systems or HP ProLiant DL360 Gen10 chassis due to form factor and power architecture differences. If mismatched, the unit may not fit in the rack or fail to power on, leading to a $1,500–$2,000 cost in rework and delays.

What to Check Before Buying a Used HPE ProLiant DL380 Gen10 8 SFF + 2 SFF Rack Server Chassis in 2026

1. Verify the Production Year: Units produced before 2019 may have a higher failure rate due to early-gen component tolerances. Reject any unit older than 2017.

2. Check RF-Hours and Maintenance Logs: Look for units with less than 15,000 RF-hours (run-for-hours). Units with over 20,000 RF-hours are at a 30% higher risk of fan or power supply failure.

3. Perform a Power-On Self-Test (POST): This test should be conducted with all drive bays populated to ensure the chassis can handle full load. A failed POST may indicate a faulty backplane or power supply.

4. Inspect the Drive Backplane and Fan Assembly: Look for signs of corrosion or overheating. A failed fan can lead to thermal shutdown and data loss, costing up to $2,500 in downtime.

5. Reject if the Chassis Has a Non-HP Power Supply Installed: A non-HP PSU can cause voltage instability and hardware failure. This is a hard reject condition.

Failing to follow these steps could result in a faulty unit that costs $3,000–$4,000 in lost time and replacement parts.

FAQ

Q: Can I use the HPE ProLiant DL380 Gen10 8 SFF + 2 SFF Rack Server Chassis with a newer HP ProLiant DL380 Gen11 server board?

A: No. The Gen10 chassis is not compatible with Gen11 server boards due to differences in backplane design and power delivery. Attempting to install a Gen11 board will result in a $1,000–$1,500 cost in rework and component replacement.

Q: Should I buy a used HPE ProLiant DL380 Gen10 chassis if I need it for a mission-critical application?

A: Only if it has less than 10,000 RF-hours and comes with a 90-day warranty. Units with more than 15,000 RF-hours have a 40% higher failure rate, which could cost up to $5,000 in downtime.

Q: How long can I expect this chassis to last in a data center environment?

A: With proper maintenance and under moderate load, the DL380 Gen10 chassis can last 7–10 years. Beyond that, the risk of component failure increases by 20% per year.

Q: What is the difference between the 8 SFF + 2 SFF and the 10 SFF configuration?

A: The 8 SFF + 2 SFF version includes two external drive bays, while the 10 SFF version has all internal bays. The 8+2 version is better suited for environments where hot-swappable external drives are needed, such as in backup or storage clusters.

Q: Is it worth buying a used chassis instead of a new one in 2026?

A: Yes, if you can verify the unit's condition and history. Used units can save 40–60% compared to new, but avoid units with more than 20,000 RF-hours, as they are at a 35% higher risk of failure.